Junger T-AP Manuale utente

premium

audio processing

series T*AP

Television Audio Processor - Specifications

Jünger Audio Studiotechnik GmbH

Justus-von- iebig-Strasse 7

D -12489 Berlin

Germany

phone: +49-30-677721-0

fax: +49-30-677721-46

info@junger-audio.com

www.junger-audio.com

1/5

hardware

•

1RU compact 19" processing device with front side controls and displays

•

Remote Panel detachable panel with case, powered by POE (Power Over Ethernet)

•Remote Panel display 8ch LED bar graph, OLED operating display, LED status display

•Remote Panel buttons BYPASS, METER, context sensitive F-Keys, MENU, ESC

•Rotary encoder predefined functions, context sensitive modes

•

8 channel audio DSP program configuration 5.1+2 & 4x2 (8x1)

•

4x 2 channel audio delay up to 2sec.delay time each

•

Dolby® decoder built in optional Dolby® E or D or D+ or pulse decoder

•Dolby® encoder built in optional Dolby® E or D or D+ or pulse encoder

•Dolby® Metadata I/O two RS485 9-pin Sub-D connectors

•Two interface slots I/O expansion slots for option boards

•3G / HD / SD SDI module option board with SDI de-embedder / embedder and relay bypass

•4Ch AES I/O module option board with 4 AES3id I/Os and relay bypass

•4Ch analog I/O module option board with 4 analog line I/Os and relay bypass

•

4x 75Ohm AES I/O on board with relay bypass

•

4x SRC selectable per AES input

• RJ45 POE connector for connecting the Remote Panel

•RJ45 network connector 100BaseT full duplex Ethernet interface

•USB connector built in USB < > serial adapter to access the device service port

•8 GPIs balanced inputs on 25pin Sub-D

•

8 GPOs relay change over contacts on 25pin Sub-D

•

Aux power supply isolated 5V supply for external wiring

•

External sync IN 75Ohm input (Word Clock, AES, Black Burst, Tri-Level)

•

Sync OUT 75Ohm Word Clock output

premium

audio processing

series T*AP

Television Audio Processor - Specifications

Jünger Audio Studiotechnik GmbH

Justus-von- iebig-Strasse 7

D -12489 Berlin

Germany

phone: +49-30-677721-0

fax: +49-30-677721-46

info@junger-audio.com

www.junger-audio.com

2/5

functional blocks

•

Input Conditioner gain

• Upmix from mono / stereo to 5.1, extra input, auto mode, 5.1 cross fade

• Compressor Reference Level, Range, Ratio, Processing

• LevelMagic™ Leveler, Transient Processor, brick wall Limiter

• Loudness Control EBU R128 or ITU-BS.1770 or level based

• Output Conditioner delay up to 2sec. per audio processor channel

• Monitor output monitors DSP software blocks

• Extra Delay lines 4x 2Ch delays up to 2 sec. each

• Signal routing assignment of signal paths to and from the DSP, the delays, the Dolby de-

and encoders and across I/O interfaces

• Metadata generator display, creation or modification of Dolby Metadata

• Sync selector manual selection of several sync sources, auto fall back

Wordclock, Video (Black Burst or Tri Level), AES, Interface Board

control

• Remote Panel detachable 19" (fan less)

• Browser based GUI standard web browser (IE 8, FireFox 3.x)

• Telnet access to the system console

• Third party remote via L-S-B Broadcast Technology GmbH Ember protocol, HTTP protocol

• VSM control virtual panels, L-S-B remote panel

• GPI 8 isolated inputs

•GPO 8 relay output

monitoring

•Power 1 front panel LED, GUI status, SNMP

•Power 2 front panel LED, GUI status, SNMP

•Temperature GUI status, SNMP

• Device status front panel LED, several GUI status displays, SNMP

•Fan speed SNMP

•Input Signal loss GUI status, SNMP

•Input Signal errors GUI status, SNMP

•Processing range GUI status, SNMP

•Internal module failure GUI status, SNMP

• SNMP agent SNMPv1 based GET and TRAP functions

• Loudness logging Junger Audio Loudness Logger - PC software for file logging:

live plot, bar graph display, offline display & analyzer

premium

audio processing

series T*AP

Television Audio Processor - Specifications

Jünger Audio Studiotechnik GmbH

Justus-von- iebig-Strasse 7

D -12489 Berlin

Germany

phone: +49-30-677721-0

fax: +49-30-677721-46

info@junger-audio.com

www.junger-audio.com

3/5

technical data – Base Unit

• Power supply dual power supply, auto fail over

AC 85 V – 264 V, 50 Hz … 60 Hz

58W max

• AES input AES3id

24 Bit, 48 kHz, 0,32 … 1,2 Vpp

sample rate converters:

24 Bit, 32 kHz … 192 kHz, THD+N: < 130 dB @ 0 dBFS

• AES output AES3id

24 Bit, 48 kHz, nominal 1 Vpp @ 75 Ohm

power fail relay bypass

• Sync internal 48 kHz, +/- 10 ppm

• Sync input AES3id: 48 kHz, 0,32 … 1,2 Vpp @ 75 Ohm

Wordclock: 48 kHz, 1 … 3 V @ 75 Ohm

Video: Black Burst or Tri Level, 0.5 V … 1.0V @ 75 Ohm

• Sync output Wordclock: 2 V @ 75 Ohm

• Network RJ45 rear connector

10/100MBit Ethernet auto sense, full duplex, auto MDI/X

RJ45 front panel connector

10/100MBit Ethernet auto sense, full duplex, auto MDI/X

Power Over Ethernet IEEE 802.3af

• USB USB 2.0 connector to internal console interface

• GPI 3 V – 30 V balanced, auto polarity

• GPO relay change over contacts, 200mA/24V (DC/AC)

• Environmental operating temperature 0 ºC to 50 ºC

Base Unit - fan cooled

non operating -20 ºC to 70 ºC

humidity 90%, non condensing

• Dimensions 19", 1RU, depth 27 cm

and Weight net weight approx..5 kg, shipping weight 7,5 kg

technical data – Remote Panel

power supply POE (Power Over Ethernet), IEEE 802.3af

consumption 8 W

max cable length if connected with the Base Unit, 30m distance CAT.5E (26AWGx4P)

Dimensions 19", 1RU, depth 6 cm

Environmental operating temperature 0 ºC to 50 ºC

non operating temperature -20 ºC to 70 ºC

humidity 90%, non condensing

premium

audio processing

series T*AP

Television Audio Processor - Specifications

Jünger Audio Studiotechnik GmbH

Justus-von- iebig-Strasse 7

D -12489 Berlin

Germany

phone: +49-30-677721-0

fax: +49-30-677721-46

info@junger-audio.com

www.junger-audio.com

4/5

technical data – interface boards – SDI De-Embedder / Embedder [SDI 150]

• SDI input standards (auto sensing)

3G - SMPTE 424/425M (Level A/B)

HD - SMPTE 292M

SD - SMPTE 259M

formats

1080p23.98, 24, 25, 29.97, 30, 50, 59.95, 60

1080i50, 59.94, 60

720p23.98, 24, 25, 29.97, 30, 50, 59.94, 60

625i50

525i59.94, …

connector

BNC IEC 169-8)

75 Ohm

return Loss

> 15 dB (typ. > 18dB) from 5MHz to 1485 MHz

> 10 dB (typ. > 11 dB) from 1485 MHz to 2970 MHz

adaptive equalization, typical of Belden 1694A coaxial cable

250 m at 270 Mbps

250 m at 1.485 Gbps

150 m at 2.97 Gbps

jitter tolerance

Timing: > 2UI, Alignment: > 0.7 UI

• SDI output standards

3G - SMPTE 424/425M (Level A/B)

HD - SMPTE 292M

SD - SMPTE 259M

formats

1080p23.98, 24, 25, 29.97, 30, 50, 59.95, 60

1080i50, 59.94, 60

720p23.98, 24, 25, 29.97, 30, 50, 59.94, 60

625i50

525i59.94, …

quantization

10Bit

connector

BNC IEC 169-8)

75 Ohm

return Loss

> 15 dB (typ. > 18dB) from 5MHz to 1485 MHz

> 10 dB (typ. > 11 dB) from 1485 MHz to 2970 MHz

signal level

800 mV +/- 10%

D.C. offset

0.0 V +/- 0.5 V

rise and fall time

< 135 ps at HD/3G, < 800 ps at SD

overshoot

< 10% of amplitude

output jitter

Timing: < 0.5 UI, Alignment: < 0.2 UI

premium

audio processing

series T*AP

Television Audio Processor - Specifications

Jünger Audio Studiotechnik GmbH

Justus-von- iebig-Strasse 7

D -12489 Berlin

Germany

phone: +49-30-677721-0

fax: +49-30-677721-46

info@junger-audio.com

www.junger-audio.com

5/5

• Special features relay bypass (manual or automatic on power fail)

320 ms video delay (number of frames depends on the video format)

16 channel audio de-embedder / embedder

VANC (SMPTE 2020-2) de-embedder / embedder

16 x 16 de-embedder matrix (mono routing)

32 x 16 embedder matrix (mono routing)

320 ms audio delay per audio channel

automatic compensation of non processed audio signals for video delay

technical data – interface boards – 4x AES I/O [DD 188]

connector

25pin Sub-D female

inputs

110 Ohm balanced or 75 Ohm unbalanced jumper selection

0.3 V … 5.0 Vpp

sample rate converter

24 Bit, input sample rate 32 kHz … 192 kHz, THD+N < 130 dB @ 0 dBFS

outputs

110 Ohm balanced or 75 Ohm unbalanced jumper selection

4.0 Vpp balanced, 1.0 Vpp @ 75 Ohm

power fail relay bypass

technical data – interface boards – 4x analog I/O [AN 144]

connector

25pin Sub-D female

input

impedance: > 10 kOhm, electronically balanced

max input level: 0.0 dBu … +24 dBu adjustable in 0.5 dB steps

dynamic range: 115 dB

THD+N: @ -1 dBFS, 15 dBu: -90 dB

frequency response: 20 Hz … 22 kHz (+/- 0.25 dB)

crosstalk @ 20 kHz: > 100 dB

calibration gain mismatch: < 0.3 dB

output

impedance: 5 Ohm, electronically balanced

max. output level @ 0 dBFS: 0.0 dBu … +24 dBu adjustable in 0.5 dB steps

dynamic range: 110dB

THD+N @ -1 dBFS: 92 dB

frequency response: 20 Hz … 22 kHz (+/- 0.25 dB)

crosstalk @ 20 kHz: > 100 dB

gain mismatch balanced / unbalanced: < 0.3 dB

power fail relay bypass

warranty

standard Junger Audio limited parts and labor warranty

Specifications are subject to change without notice

Altri manuali per T-AP

Indice

Altri manuali junger Hardware per computer

junger

junger d07 Manuale utente

junger

junger EASY LOUDNESS Manuale utente

junger

junger Accent1 Manuale utente

junger

junger T-AP Manuale utente

junger

junger V*AP Manuale utente

junger

junger b42 Manuale utente

junger

junger d07 Manuale utente

junger

junger D-AP LM4 Manuale utente

junger

junger b40 Manuale utente

junger

junger D*AP4 FLX Manuale utente

Manuali Hardware per computer popolari di altre marche

EMC2

EMC2 VNX Series Manuale del proprietario

Panasonic

Panasonic DV0PM20105 Manuale utente

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuale utente

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuale utente

Raidon

Raidon iT2300 Manuale utente

National Instruments

National Instruments PXI-8186 Manuale utente

Hauppauge

Hauppauge WinTV-HVR-2250 Manuale utente

Kontron

Kontron CP6002 Manuale utente

Manhattan

Manhattan 702843 Manuale utente

Aphex

Aphex 230 Manuale utente

AMD

AMD Phenom II Manuale operativo

Intel

Intel NUC 12 Pro Manuale utente

dbx

dbx Zone Pro 1260 Manuale utente

Galaxy

Galaxy GHDX2-2430S-24F4D Manuale utente

Intel

Intel AXXRMFBU4 Manuale utente

Kontron

Kontron DIMM-PC/MD Manuale utente

ST X-NUCLEO-SAFEA1B Istruzioni operative

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuale utente