Juniper JATP400 Istruzioni per l'installazione
JATP400 Appliance Hardware Guide
Published
2021-05-17
Juniper Networks, Inc.
1133 Innovaon Way
Sunnyvale, California 94089
USA
408-745-2000
www.juniper.net
Juniper Networks, the Juniper Networks logo, Juniper, and Junos are registered trademarks of Juniper Networks, Inc.
in the United States and other countries. All other trademarks, service marks, registered marks, or registered service
marks are the property of their respecve owners.
Juniper Networks assumes no responsibility for any inaccuracies in this document. Juniper Networks reserves the right
to change, modify, transfer, or otherwise revise this publicaon without noce.
JATP400 Appliance Hardware Guide
Copyright © 2021 Juniper Networks, Inc. All rights reserved.
The informaon in this document is current as of the date on the tle page.
YEAR 2000 NOTICE
Juniper Networks hardware and soware products are Year 2000 compliant. Junos OS has no known me-related
limitaons through the year 2038. However, the NTP applicaon is known to have some diculty in the year 2036.
END USER LICENSE AGREEMENT
The Juniper Networks product that is the subject of this technical documentaon consists of (or is intended for use
with) Juniper Networks soware. Use of such soware is subject to the terms and condions of the End User License
Agreement ("EULA") posted at hps://support.juniper.net/support/eula/. By downloading, installing or using such
soware, you agree to the terms and condions of that EULA.
ii
Table of Contents
About This Guide | vii
1
Overview
JATP400 System Overview | 2
JATP400 Appliance Descripon | 2
JATP400 Appliance Transceiver Interface | 3
JATP400 Field-Replaceable Units | 3
JATP400 Chassis | 4
JATP400 Appliance Front Panel Descripon | 4
JATP400 Appliance Back Panel Descripon | 10
2
Site Planning, Preparaon, and Specicaons
Overview of Preparing the Site for the JATP400 | 17
JATP400 Site Guidelines and Requirements | 17
General Site Installaon Guidelines for the JATP400 Appliance | 18
JATP400 Appliance Physical Specicaons | 18
JATP400 Appliance Rack and Clearance Requirements | 20
Addional Hardware Requirements | 21
3
Inial Installaon and Conguraon
JATP400 Installaon Overview | 25
Overview of Installing the JATP400 Appliance in a Rack | 25
Tools and Parts Required for Installing the JATP400 Appliance | 25
Unpacking the JATP400 | 26
Overview of Unpacking the JATP400 | 26
Unpacking the JATP400 | 27
Verifying the JATP400 Parts Received | 27
iii
Installing the JATP400 in a Rack | 29
Installing the JATP400 Appliance | 29
Connecng the JATP400 to Power | 35
Connecng the JATP400 Appliance to Earth Ground | 35
Connecng AC Power Source to the JATP400 Appliance | 35
Connecng DC Power to the JATP400 Appliance | 37
Connecng the JATP400 Appliance to a Management Device | 38
Performing the Inial Soware Conguraon for the JATP400 | 39
Selecng the Form Factor | 39
Conguring the IP Address and Domain Name Servers | 41
Conguring the Device Host Name | 41
Conguring the Alternate Exhaust Interface | 42
Conguring the Device Basic Aributes | 43
Accessing the JATP Interface | 44
Conguring IPMI | 46
4
Maintaining Components
Maintaining JATP400 Power System | 52
Maintaining the JATP400 Power Supply | 52
Replacing an AC Power Supply on the JATP400 Appliance | 52
Replacing AC Power Supply Cables on the JATP400 Appliance | 53
Replacing a DC Power Supply on the JATP400 Appliance | 54
Replacing DC Power Supply Cables on the JATP400 Appliance | 55
Maintaining the JATP400 Hard Disk Drive | 56
Maintaining the JATP400 RAID Array | 56
Replacing a Hard Drive on the JATP400 Appliance | 56
5
Troubleshoong Hardware
iv
Contacng Juniper Networks Technical Assistance Center | 61
6
Returning the Chassis or Components
Returning the JATP400 Chassis or Components | 63
Locang the Serial Number on a JATP400 Chassis | 63
Contacng Customer Support to Obtain Return Material Authorizaon | 63
Packing a JATP400 for Shipping | 64
7
Safety and Compliance Informaon
General Safety Guidelines and Warnings | 68
Denions of Safety Warning Levels | 69
Qualied Personnel Warning | 71
Warning Statement for Norway and Sweden | 71
Fire Safety Requirements | 72
Installaon Instrucons Warning | 73
Chassis Liing Guidelines for the JATP400 Appliance | 74
Restricted Access Warning | 74
Ramp Warning | 76
Rack-Mounng and Cabinet-Mounng Warnings | 76
Grounded Equipment Warning | 80
Radiaon from Open Port Apertures Warning | 81
Laser and LED Safety Guidelines and Warnings | 82
Maintenance and Operaonal Safety Guidelines and Warnings | 85
General Electrical Safety Guidelines and Warnings | 91
Acon to Take Aer an Electrical Accident | 92
Prevenon of Electrostac Discharge Damage | 93
AC Power Electrical Safety Guidelines | 94
v
AC Power Disconnecon Warning | 95
DC Power Disconnecon Warning | 96
DC Power Grounding Requirements and Warning | 98
DC Power Wiring Sequence Warning | 99
DC Power Wiring Terminaons Warning | 100
Mulple Power Supplies Disconnecon Warning | 101
TN Power Warning | 102
JATP400 Agency Approvals and Compliance Statements | 103
Agency Approvals for the JATP400 Appliance | 103
Compliance Statements for Acousc Noise for the JATP400 Appliance | 106
vi
About This Guide
Use this guide to install hardware and perform inial soware conguraon, roune maintenance, and
troubleshoong for the Juniper Networks Advanced Threat Prevenon 400 (JATP400) appliance. Aer
compleng the installaon and basic conguraon procedures covered in this guide, refer to the JATP
Soware documentaon for informaon about further soware conguraon.
RELATED DOCUMENTATION
How to Set Up Your JATP400 Appliance
vii
JATP400 System Overview
IN THIS SECTION
JATP400 Appliance Descripon | 2
JATP400 Appliance Transceiver Interface | 3
JATP400 Field-Replaceable Units | 3
JATP400 Appliance Descripon
IN THIS SECTION
Benets of the JATP400 Appliance | 2
Juniper Networks Advanced Threat Prevenon 400 (JATP400) appliance is an advanced threat
prevenon plaorm that is designed to idenfy and prevent targeted aacks across mulple threat
vectors. The appliance can be deployed as a Core device, Trac Collector, Email Collector, Manager of
Central Managers (MCM), Secondary Core, or as an All-In-One device.
The JATP400 appliance is a 1-rack-unit (1-U), rack-mountable chassis with hot-swappable dual AC
power supplies (or oponal dual DC power supplies), four hot-swappable hard disk drives that support
RAID, 32-GB memory, two 10-Gigabit Ethernet interfaces, two 10-Gigabit Ethernet SFP+ interfaces, and
four 1-Gigabit Ethernet interfaces.
Benets of the JATP400 Appliance
•Mulvector trac inspecon—Provides connuous, mulstage detecon and analysis of Web, e-
mail, and lateral spread trac moving through the network.
•Mulstage threat detecon—Monitors network trac to idenfy threats as they progress through
the kill chain, detecng phishing, exploits, malware downloads, command and control
communicaons, and internal threats.
2
•Mulstage threat analysis—Performs stac, payload, machine learning, and behavior analyses, as well
as malware reputaon analysis, and connuously adapts to the changing threat landscape by
leveraging Juniper Networks Global Security Service, a cloud-based service that oers the latest
threat detecon and migaon informaon.
•Threat analycs—Oers a holisc view of identy and threat acvity gathered from a diverse set of
sources such as Acve Directory, endpoint anvirus, rewalls, secure Web gateways, intrusion
detecon systems, and endpoint detecon and response tools. The analycs component receives
data from these sources, idenes advanced malicious traits, and correlates the events to provide
complete visibility into a threat’s kill chain.
•Integraon with third-party devices—The JATP400 appliance supports an open API architecture,
which enables it to integrate with several third-party security devices to seamlessly and
automacally migate threats.
JATP400 Appliance Transceiver Interface
Two 10-Gigabit Ethernet SFP+ ports on the rear panel of the JATP400 appliance support SFP+
transceivers. Table 1 on page 3 lists the details of supported transceiver type.
Table 1: JATP400 Appliance Transceiver Type
Transceiver Type Card Model Descripon
SFP+ UNIV-SFPP-DUAL-SR Dual Rate 10GBASE-SR/1000BASE-SX
UNIV-SFPP-DUAL-LR Dual Rate 10GBASE-LR/1000BASE-LX
JATP400 Field-Replaceable Units
Field-replaceable units (FRUs) are hardware components that can be replaced at the customer site. Hot-
swappable FRUs are the components that you can remove and replace without powering o the device
or disrupng the funcons of the device.
JATP400 appliance supports FRUs: power supply and hard disk drive.
3
Altri manuali per JATP400
1
Indice
Altri manuali Juniper Telaio
Juniper
Juniper Junos Space JA2500 Istruzioni per l'installazione
Juniper
Juniper PTX3000 Istruzioni per l'installazione
Juniper
Juniper Day One+ QFX5700 Manuale utente
Juniper
Juniper PTX10008 Manuale utente
Juniper
Juniper Junos Space JA1500 Manuale utente
Juniper
Juniper CTP150 Manuale utente
Juniper
Juniper MX960 Manuale utente
Juniper
Juniper CTP1000 Series Istruzioni per l'installazione
