Juniper SRX320 Istruzioni per l'installazione

SRX320 Services Gateway Hardware Guide

Published

2020-08-19

Juniper Networks, Inc.

1133 Innovation Way

Sunnyvale, California 94089

USA

408-745-2000

www.juniper.net

Juniper Networks, the Juniper Networks logo, Juniper, and Junos are registered trademarks of Juniper Networks, Inc. in

the United States and other countries. All other trademarks, service marks, registered marks, or registered service marks

are the property of their respective owners.

Juniper Networks assumes no responsibility for any inaccuracies in this document. Juniper Networks reserves the right

to change, modify, transfer, or otherwise revise this publication without notice.

SRX320 Services Gateway Hardware Guide

The information in this document is current as of the date on the title page.

YEAR 2000 NOTICE

Juniper Networks hardware and software products are Year 2000 compliant. Junos OS has no known time-related

limitations through the year 2038. However, the NTP application is known to have some difficulty in the year 2036.

END USER LICENSE AGREEMENT

The Juniper Networks product that is the subject of this technical documentation consists of (or is intended for use with)

Juniper Networks software. Use of such software is subject to the terms and conditions of the End User License Agreement

(“EULA”) posted at https://support.juniper.net/support/eula/. By downloading, installing or using such software, you

agree to the terms and conditions of that EULA.

Table of Contents

About the Documentation | viii

Documentation and Release Notes | viii

Using the Examples in This Manual | viii

Merging a Full Example | ix

Merging a Snippet | x

Documentation Conventions | x

Documentation Feedback | xiii

Requesting Technical Support | xiii

Self-Help Online Tools and Resources | xiv

Creating a Service Request with JTAC | xiv

Overview

SRX320 Services Gateway Overview | 16

SRX320 Services Gateway Description | 16

SRX320 Services Gateway Field Replaceable Units Overview | 17

Benefits of the SRX320 Services Gateway | 17

SRX320 Chassis | 18

SRX320 Services Gateway Chassis Overview | 18

SRX320 Services Gateway Front Panel | 18

Network Port LEDs | 21

SRX320 Services Gateway Back Panel | 21

SRX320 Services Gateway Interface Modules Overview | 23

SRX320 Cooling System | 23

SRX320 Power System | 24

Understanding the SRX320 Services Gateway Power Supply | 25

SRX320 Services Gateway Power Specifications and Requirements | 25

Power Cord Specifications for SRX320 | 26

iii

Site Planning, Preparation, and Specifications

SRX320 Site Preparation Checklist | 29

SRX320 Site Guidelines and Requirements | 31

SRX320 Services Gateway General Site Guidelines | 31

SRX320 Services Gateway Environmental Specifications | 32

SRX320 Services Gateway Electrical Wiring Guidelines | 32

SRX320 Services Gateway Grounding Specifications | 34

SRX320 Services Gateway Physical Specifications | 34

SRX320 Services Gateway Clearance Requirements for Airflow and Hardware

Maintenance | 35

Rack Requirements | 35

Cabinet Requirements | 36

SRX320 Transceiver Specifications and Pinouts | 37

SRX320 Transceiver Support | 37

RJ-45 Connector Pinouts for the SRX320 Services Gateway Ethernet Port | 37

RJ-45 Connector Pinouts for the SRX320 Services Gateway Console Port | 38

Mini-USB Connector Pinouts for the SRX320 Services Gateway Console Port | 39

Initial Installation and Configuration

SRX320 Installation Overview | 41

SRX320 Services Gateway Installation Overview | 41

SRX320 Services Gateway Autoinstallation Overview | 41

Unpacking and Mounting the SRX320 | 43

Unpacking the SRX320 Services Gateway | 43

Verifying Parts Received with the SRX320 Services Gateway | 44

Installing the SRX320 Services Gateway on a Desk | 45

Installing the SRX320 Services Gateway on a Wall | 45

Installing the SRX320 Services Gateway in a Rack | 48

Connecting the SRX320 to Power | 52

Required Tools and Parts for Grounding the SRX320 Services Gateway | 52

Connecting the SRX320 Services Gateway Grounding Cable | 53

Connecting the SRX320 Services Gateway to the Power Supply | 54

Powering On the SRX320 Services Gateway | 55

Powering Off the SRX320 Services Gateway | 56

Connecting the SRX320 Services Gateway to a Management Console | 57

Configuring Junos OS on the SRX320 | 58

SRX320 Services Gateway Software Configuration Overview | 59

Understanding SRX320 Services Gateway Factory-Default Settings | 59

Initial Configuration | 60

Initial Configuration Using J-Web | 61

Initial Configuration Using CLI | 62

Plug and Play | 64

Customize the Configuration Using J-Web | 65

Viewing Factory-Default Settings | 66

Maintaining Components

Maintaining the SRX320 Components | 69

Required Tools and Parts for Maintaining the SRX320 Services Gateway Hardware

Components | 69

Routine Maintenance Procedures for the SRX320 Services Gateway | 69

Maintaining the SRX320 Services Gateway Cooling System Components | 70

Maintaining the SRX320 Services Gateway Power Supply | 70

Replacing Mini-Physical Interface Modules in the SRX320 Services Gateway | 70

Troubleshooting Hardware

Troubleshooting the SRX320 | 73

Troubleshooting Resources for the SRX320 Services Gateway Overview | 73

Troubleshooting Chassis and Interface Alarm Messages on the SRX320 Services Gateway | 73

Troubleshooting the Power System on the SRX320 Services Gateway | 75

Using the RESET CONFIG Button | 75

Changing the RESET CONFIG Button Behavior | 76

Contacting Customer Support and Returning the Chassis or Components

Returning the SRX320 Chassis or Components | 78

Contacting Customer Support | 78

Returning a SRX320 Services Gateway Component to Juniper Networks | 79

Locating the SRX320 Services Gateway Chassis Serial Number and Agency Labels | 79

Locating the SRX320 Services Gateway Mini-Physical Interface Module Serial Number

Label | 80

Listing the SRX320 Services Gateway Component Details with the CLI | 80

Required Tools and Parts for Packing the SRX320 Services Gateway | 81

Packing the SRX320 Services Gateway for Shipment | 81

Packing SRX320 Services Gateway Components for Shipment | 82

Safety and Compliance Information

Definitions of Safety Warning Levels | 85

General Safety Guidelines and Warnings | 88

Restricted Access Warning | 90

Qualified Personnel Warning | 93

Prevention of Electrostatic Discharge Damage | 93

Fire Safety Requirements | 95

Fire Suppression | 95

Fire Suppression Equipment | 95

Laser and LED Safety Guidelines and Warnings | 96

General Laser Safety Guidelines | 96

Class 1 Laser Product Warning | 97

Class 1 LED Product Warning | 98

Laser Beam Warning | 99

Radiation from Open Port Apertures Warning | 100

Maintenance and Operational Safety Guidelines and Warnings | 101

Battery Handling Warning | 102

Jewelry Removal Warning | 103

Lightning Activity Warning | 105

Operating Temperature Warning | 106

Product Disposal Warning | 108

Action to Take After an Electrical Accident | 109

General Electrical Safety Guidelines and Warnings | 109

SRX320 Services Gateway Agency Approvals | 110

SRX320 Services Gateway Acoustic Noise Compliance Statements | 111

SRX320 Services Gateway EMC Requirements | 112

Canada | 112

European Community | 112

Israel | 112

Japan | 112

United States | 113

vii

About the Documentation

IN THIS SECTION

Documentation and Release Notes | viii

Using the Examples in This Manual | viii

Documentation Conventions | x

Documentation Feedback | xiii

Requesting Technical Support | xiii

Use this guide to install hardware and perform initial software configuration, routine maintenance, and

troubleshooting for the SRX320 Services Gateway. After completing the installation and basic configuration

procedures covered in this guide, refer to the Junos OS documentation for information about further

software configuration.

Documentation and Release Notes

To obtain the most current version of all Juniper Networks®technical documentation, see the product

documentation page on the Juniper Networks website at https://www.juniper.net/documentation/.

If the information in the latest release notes differs from the information in the documentation, follow the

product Release Notes.

Juniper Networks Books publishes books by Juniper Networks engineers and subject matter experts.

These books go beyond the technical documentation to explore the nuances of network architecture,

deployment, and administration. The current list can be viewed at https://www.juniper.net/books.

Using the Examples in This Manual

If you want to use the examples in this manual, you can use the load merge or the load merge relative

command. These commands cause the software to merge the incoming configuration into the current

candidate configuration. The example does not become active until you commit the candidate configuration.

viii

If the example configuration contains the top level of the hierarchy (or multiple hierarchies), the example

isafull example. In this case, use the load merge command.

If the example configuration does not start at the top level of the hierarchy, the example is a snippet. In

this case, use the load merge relative command. These procedures are described in the following sections.

Merging a Full Example

To merge a full example, follow these steps:

1. From the HTML or PDF version of the manual, copy a configuration example into a text file, save the

file with a name, and copy the file to a directory on your routing platform.

For example, copy the following configuration to a file and name the file ex-script.conf. Copy the

ex-script.conf file to the /var/tmp directory on your routing platform.

system {

scripts {

commit {

file ex-script.xsl;

}

interfaces {

fxp0 {

disable;

unit 0 {

family inet {

address 10.0.0.1/24;

}

2. Merge the contents of the file into your routing platform configuration by issuing the load merge

configuration mode command:

[edit]

user@host# load merge /var/tmp/ex-script.conf

load complete

Merging a Snippet

To merge a snippet, follow these steps:

1. From the HTML or PDF version of the manual, copy a configuration snippet into a text file, save the

file with a name, and copy the file to a directory on your routing platform.

For example, copy the following snippet to a file and name the file ex-script-snippet.conf. Copy the

ex-script-snippet.conf file to the /var/tmp directory on your routing platform.

commit {

file ex-script-snippet.xsl; }

2. Move to the hierarchy level that is relevant for this snippet by issuing the following configuration mode

command:

[edit]

user@host# edit system scripts

[edit system scripts]

3. Merge the contents of the file into your routing platform configuration by issuing the load merge

relative configuration mode command:

[edit system scripts]

user@host# load merge relative /var/tmp/ex-script-snippet.conf

load complete

For more information about the load command, see CLI Explorer.

Documentation Conventions

Table 1 on page xi defines notice icons used in this guide.

Altri manuali per SRX320

Indice

Altri manuali Juniper Portale

Juniper

Juniper SRX 210 Istruzioni per l'installazione

Juniper

Juniper SRX5400 Manuale utente

Juniper

Juniper SRX 210 Istruzioni per l'installazione

Juniper

Juniper SRX380 Manuale utente

Juniper

Juniper SRX650 Istruzioni per l'installazione

Juniper

Juniper BX7000 Manuale utente

Juniper

Juniper SRX5600 Manuale utente

Juniper

Juniper SRX340 Guida all'installazione

Juniper

Juniper SRX110 Manuale utente

Juniper

Juniper SRX240 Series Manuale utente

Juniper

Juniper SRX300 Series Istruzioni per l'installazione

Juniper

Juniper SRX340 Istruzioni per l'installazione

Juniper

Juniper SRX4100 Istruzioni per l'installazione

Juniper

Juniper SRX100 Istruzioni per l'installazione

Juniper

Juniper SRX Series Manuale utente

Juniper

Juniper SRX 5800 Manuale utente

Juniper

Juniper SRX550 Istruzioni per l'installazione

Juniper

Juniper SRX550 Manuale utente

Juniper

Juniper SRX300 Series Manuale utente

Juniper

Juniper SRX 5800 Istruzioni per l'installazione

Juniper

Juniper SRX100 Manuale utente

Juniper

Juniper SRX210HE2 Manuale utente

Juniper

Juniper SRX 1400 SERVICES GATEWAY - Manuale utente

Juniper

Juniper SRX 210 Manuale utente

Manuali Portale popolari di altre marche

LST

LST M500RFE-AS Manuale utente

Kinnex

Kinnex Media Gateway Manuale utente

2N Telekomunikace

2N Telekomunikace 2N StarGate Manuale utente

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuale utente

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Manuale utente

Telsey

Telsey CPVA 500 - SIP Manuale utente

RTA

RTA 460A-NNA4 Scheda tecnica

Shaw

Shaw Gateway HDPVR Manuale utente

ABB

ABB VSN900 Guida rapida

Commander

Commander Pulse Manuale utente

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manuale utente

NETGEAR

NETGEAR C6300BD Manuale utente

Amit

Amit CDW531AM Manuale utente

HMS

HMS Netbiter EasyConnect EC150 Manuale utente

Huawei

Huawei EchoLife HG620 Manuale utente

AT&T

AT&T U-verse 3801 Manuale per l'uso e la cura

Logic IO

Logic IO RTCU MX2 turbo Manuale utente

Suttle

Suttle MediaMAX MXM-521 Manuale utente