JUNO JGVX605E1 Manuale utente
JGVX605E1
User Manual
Dishwasher
Benutzerin‐
formation
Geschirrspü‐
ler
CONTENTS
Safety information 2
Safety instructions 3
Product description 6
Control panel 7
Programme selection 7
Basic settings 9
Before first use 13
Daily use 14
Hints and tips 16
Care and cleaning 18
Troubleshooting 22
Technical information 26
Subject to change without notice.
VISIT OUR WEBSITE TO:
Get usage advice, brochures, trouble shooter, service and repair
information:
www.juno.de/support
SAFETY INFORMATION
Before the installation and use of the appliance, carefully
read the supplied instructions. The manufacturer is not
responsible for any injuries or damage that are the result of
incorrect installation or usage. Always keep the instructions
in a safe and accessible location for future reference.
Children and vulnerable people safety
•This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning
the use of the appliance in a safe way and understand the
hazards involved.
•Children between 3 and 8 years of age and persons with
very extensive and complex disabilities shall be kept away
from the appliance unless continuously supervised.
•Children of less than 3 years of age should be kept away
from the appliance unless continuously supervised.
•Do not let children play with the appliance.
•Keep detergents away from children.
•Keep children and pets away from the appliance when the
door is open.
2
•Children shall not carry out cleaning and user maintenance
of the appliance without supervision.
General Safety
•This appliance is intended to be used in household and
similar applications such as:
–farm houses; staff kitchen areas in shops, offices and
other working environments;
–by clients in hotels, motels, bed & breakfast and other
residential type environments.
•Do not change the specification of this appliance.
•The operating water pressure (minimum and maximum)
must be between 0.5 (0.05) / 8 (0.8) bar (MPa)
•Follow the maximum number of 13 place settings.
•If the supply cord is damaged, it must be replaced by the
manufacturer, its Authorised Service Centre or similarly
qualified persons in order to avoid a hazard.
•WARNING: Knives and other utensils with sharp points
must be loaded in the basket with their points down or
placed in a horizontal position.
•Do not leave the appliance with the open door unattended
to avoid stepping accidentally onto it.
•Before any maintenance operation, deactivate the
appliance and disconnect the mains plug from the socket.
•Do not use high pressure water sprays and/or steam to
clean the appliance.
•If the appliance has ventilation openings in the base, they
must not be covered e.g. by a carpet.
•The appliance is to be connected to the water mains using
the new supplied hose-sets. Old hose sets must not be
reused.
SAFETY INSTRUCTIONS
Installation
WARNING! Only a qualified
person must install this
appliance.
• Remove all the packaging.
• Do not install or use a damaged
appliance.
3
• Do not use the appliance before
installing it in the built-in structure due
to safety manner.
• Follow the installation instructions
supplied with the appliance.
• Always take care when moving the
appliance as it is heavy. Always use
safety gloves and enclosed footwear.
• Do not install or use the appliance
where the temperature is less than
0 °C.
• Install the appliance in a safe and
suitable place that meets installation
requirements.
Electrical connection
WARNING! Risk of fire and
electric shock.
• The appliance must be earthed.
• Make sure that the parameters on the
rating plate are compatible with the
electrical ratings of the mains power
supply.
• Always use a correctly installed
shockproof socket.
• Do not use multi-plug adapters and
extension cables.
• Make sure not to cause damage to the
mains plug and to the mains cable.
Should the mains cable need to be
replaced, this must be carried out by
our Authorised Service Centre.
• Connect the mains plug to the mains
socket only at the end of the
installation. Make sure that there is
access to the mains plug after the
installation.
• Do not pull the mains cable to
disconnect the appliance. Always pull
the mains plug.
• This appliance is fitted with a 13 A
mains plug. If it is necessary to change
the mains plug fuse, use only a 13 A
ASTA (BS 1362) fuse (UK and Ireland
only).
Water connection
• Do not cause damage to the water
hoses.
• Before connection to new pipes, pipes
not used for a long time, where repair
work has been carried out or new
devices fitted (water meters, etc.), let
the water flow until it is clean and clear.
• Ensure that there are no visible water
leaks during and after the first use of
the appliance.
• The water inlet hose has a safety valve
and a sheath with an inner mains
cable.
WARNING! Dangerous
voltage.
• If the water inlet hose is damaged,
immediately close the water tap and
disconnect the mains plug from the
mains socket. Contact the Authorised
Service Centre to replace the water
inlet hose.
Use
• Do not put flammable products or items
that are wet with flammable products
in, near or on the appliance.
• Dishwasher detergents are dangerous.
Follow the safety instructions on the
detergent packaging.
• Do not drink and play with the water in
the appliance.
• Do not remove the dishes from the
appliance until the programme is
complete. Some detergent may remain
on the dishes.
• Do not store items or apply pressure on
the open door of the appliance.
• The appliance can release hot steam if
you open the door while a programme
operates.
4
Service
• To repair the appliance contact the
Authorised Service Centre. Use original
spare parts only.
• Please note that self-repair or non-
professional repair can have safety
consequences and might void the
guarantee.
• The following spare parts will be
available for 7 years after the model
has been discontinued: motor,
circulation and drain pump, heaters and
heating elements, including heat
pumps, piping and related equipment
including hoses, valves, filters and
aquastops, structural and interior parts
related to door assemblies, printed
circuit boards, electronic displays,
pressure switches, thermostats and
sensors, software and firmware
including reset software. Please note
that some of these spare parts are only
available to professional repairers, and
that not all spare parts are relevant for
all models.
• The following spare parts will be
available for 10 years after the model
has been discontinued: door hinge and
seals, other seals, spray arms, drain
filters, interior racks and plastic
peripherals such as baskets and lids.
• Concerning the lamp(s) inside this
product and spare part lamps sold
separately: These lamps are intended
to withstand extreme physical
conditions in household appliances,
such as temperature, vibration,
humidity, or are intended to signal
information about the operational status
of the appliance. They are not intended
to be used in other applications and are
not suitable for household room
illumination.
Disposal
WARNING! Risk of injury or
suffocation.
• Disconnect the appliance from the
mains supply.
• Cut off the mains cable and discard it.
• Remove the door catch to prevent
children and pets to get closed in the
appliance.
5
PRODUCT DESCRIPTION
54
67
9 8
12
23
1
11 10
1Ceiling spray arm
2Upper spray arm
3Lower spray arm
4Filters
5Rating plate
6Salt container
7Air vent
8Rinse aid dispenser
9Detergent dispenser
10 Cutlery basket
11 Lower basket
12 Upper basket
Beam-on-Floor
The Beam-on-Floor is a light that is
displayed on the floor below the appliance
door.
• A red light comes on when a
programme starts. It remains on for the
duration of the programme.
• A green light comes on when the
programme is complete.
• The red light flashes when the
appliance has a malfunction.
The Beam-on-Floor is off when
the appliance is deactivated.
6
CONTROL PANEL
1 2 3 4 5 6
1On/Off button/Reset button
2Delay start button
3Indicators
4Programme buttons
5Extra power button
6AUTO programme button
Indicators
Indicator Description
Rinse aid indicator. It is on when the rinse aid dispenser needs refilling. Refer
to "Before first use".
Salt indicator. It is on when the salt container needs refilling. Refer to "Before
first use".
Machine Care indicator. It is on when the appliance needs internal cleaning
with the Machine Care programme. Refer to "Care and cleaning".
Drying phase indicator. It is on when a programme with the drying phase is
selected. It flashes when the drying phase operates. Refer to "Programme
selection".
PROGRAMME SELECTION
Programmes
BA C
A. 30min is the shortest programme
suitable for washing a load with fresh
and light soil.
B. 90min is a programme suitable for
washing and drying normally soiled
items.
C. ECO is the longest programme
offering the most efficient use of
energy and water consumption for
crockery and cutlery with normal soil.
This is the standard programme for
test institutes.
1)
AUTO
This program automatically adjusts the
wash cycle to the type of load.
1) This programme is used to assess compliance with the Ecodesign Comission Regulation (EU) 2019/2022.
7
The appliance senses the degree of soil
and the amount of dishes in the baskets. It
adjusts the temperature and quantity of
water as well as the wash duration.
Options
You can adjust the programme selection
to your needs by activating options.
Extra power
This option improves the washing results
of the selected programme. It increases
the wash temperature and duration.
Programmes overview
Pro‐
gramme
Type of load Degree of
soil
Programme phases Options
30min • Crockery
• Cutlery
• Fresh • Wash 50 °C
• Intermediate rinse
• Final rinse 45 °C
• AirDry
• Extra power
90min • Crockery
• Cutlery
• Pots
• Pans
• Normal
• Lightly
dried-on
• Wash 60 °C
• Intermediate rinse
• Final rinse 55 °C
• Drying
• AirDry
• Extra power
ECO • Crockery
• Cutlery
• Pots
• Pans
• Normal
• Lightly
dried-on
• Prewash
• Wash 50 °C
• Intermediate rinse
• Final rinse 60 °C
• Drying
• AirDry
• Extra power
AUTO • Crockery
• Cutlery
• Pots
• Pans
The pro‐
gramme ad‐
justs to all
degrees of
soil.
• Prewash
• Wash 50 - 60 °C
• Intermediate rinse
• Final rinse 55 °C
• Drying
• AirDry
Options are not
applicable to this
programme.
Machine
Care
• No load The pro‐
gramme
cleans the
appliance in‐
terior.
Refer to
"Care and
cleaning".
• Wash 65 °C
• Intermediate rinse
• Final rinse
• AirDry
Options are not
applicable to this
programme.
8
Consumption values
Programme
1)
2)
Water (l) Energy (kWh) Duration (min)
30min 11.2 0.610 30
90min 11.7 0.970 90
ECO 10.5 0.936 240
AUTO 11.8 0.980 170
Machine Care 10.5 0.540 60
1) The pressure and the temperature of the water, the variations of the mains supply, the options, the quantity of
dishes and the degree of soil can change the values.
2) The values for programmes other than ECO are indicative only.
Information for test institutes
To receive the necessary information for
conducting performance tests (e.g.
according to EN60436), send an email to:
In your request, include the product
number code (PNC) from the rating plate.
For any other questions regarding your
dishwasher, refer to the service book
provided with your appliance.
BASIC SETTINGS
You can configure the appliance by
changing basic settings according to your
needs.
Num‐
ber
Settings Values Description
1)
1Water hard‐
ness
From level 1 to
level 10 (de‐
fault: 5)
Adjust the level of the water softener ac‐
cording to the water hardness in your area.
2Rinse aid level From level 0 to
level 6 (de‐
fault: 4)
Adjust the level of the rinse aid according to
the necessary dosage.
3End sound On
Off (default)
Activate or deactivate the acoustic signal for
the end of a programme.
4Auto door
open
On (default)
Off
Activate or deactivate the AirDry.
5Key tones On (default)
Off
Activate or deactivate the sound of the but‐
tons when pressed.
1) For more details, refer to the information provided in this chapter.
9
You can change the basic settings in
setting mode.
When the appliance is in setting mode, the
indicators on the control panel represent
available settings. For each setting, a
dedicated indicator flashes:
1 3 2
4 5
Setting mode
How to enter setting mode
You can enter setting mode before
starting a programme. You cannot enter
setting mode while the programme is
running.
To enter setting mode, press and hold
simultaneously 30min and ECO for about
3 seconds.
• The light related to and the
indicator flash.
• The indicators , and are
on.
• The lights related to the programme
buttons are on.
How to navigate in setting mode
You can navigate in setting mode using
programme buttons.
BA C
A. Previous button
B. OK button
C. Next button
Use Previous and Next to switch
between the basic settings and to change
their value.
Use OK to enter the selected setting and
to confirm changing its value.
How to change a setting
Make sure the appliance is in setting
mode.
1. Press Previous or Next until the
indicator dedicated to the desired
setting flashes.
The light related to indicates the
current setting value:
• For the settings with two values (on
and off), the light is either on (= the
setting is on) or off (= the setting is
off).
• For the settings with multiple values
(levels), the light flashes. The
number of flashes indicates the
current setting value (e.g. 5 flashes
+ pause + 5 flashes... = level 5).
2. Press OK to enter the setting.
• The indicator related to the setting
is on.
• The other indicators are off.
• The light related to indicates the
current setting value.
3. Press Previous or Next to change the
value.
4. Press OK to confirm the setting.
• The new setting is saved.
• The appliance returns to the setting
selection.
5. Press and hold simultaneously 30min
and ECO for about 3 seconds to exit
setting mode.
The appliance returns to the programme
selection.
The saved settings remain valid until you
change them again.
The water softener
The water softener removes minerals from
the water supply, which would have a
10
Altri manuali per JGVX605E1
1
Indice
Lingue:
Altri manuali JUNO Lavastoviglie
JUNO
JUNO JSI6960B Manuale utente
JUNO
JUNO JGVN606E1 Manuale utente
JUNO
JUNO JSI3741B Manuale utente
JUNO
JUNO Le Maitre JSI3710BR Manuale utente
JUNO
JUNO JGVX60628 Manuale utente
JUNO
JUNO JGVN456F1 Manuale utente
JUNO
JUNO JGVN606F1 Manuale utente
JUNO
JUNO JGVX60626 Manuale utente
JUNO
JUNO JSI4362B Manuale utente
JUNO
JUNO JSV2541 Manuale utente
JUNO
JUNO JSI5562E Manuale utente
JUNO
JUNO JGVX60528 Manuale utente
JUNO
JUNO JGIN605F1 Manuale utente
JUNO
JUNO JGVX60528 Manuale utente
JUNO
JUNO JSI4360B Manuale utente
JUNO
JUNO JGVX608E1 Manuale utente
JUNO
JUNO JSI5462B Manuale utente
JUNO
JUNO JSV5960 Manuale utente
JUNO
JUNO JSI4361B Manuale utente
JUNO
JUNO JSI1341B Manuale utente
