Juplink EC4-1200 Manuale utente
USAGE MANUL
Juplink EC4-1200
Wireless Range Extender
Chapter 1 Product Overview
1.1. Package Contents
Unpack the package carefully and verify the following items are included:
• Wireless Range Extender
• Quick Start Guide
Note:
If any of the above items are incorrect, missing, or damaged, please contact us in Juplink.com for
replacement.
1.2. Getting to Know Your Wireless Range Extender
LED
LED
Status
Description
PWR
LED off
Power off
LED on
Power on
2.4G / 5G Signal LED
LED off
Equipment Connection Normal No Wi-Fi
signal or Power off
LED on
No Transferming data
LED Flashing
Transferming data
WPS
LED off
Function not enabled or Powered off
LED on
WPS is enabled and connected
LED Flashing
WPS is enabled and in connection
Wi-Fi Signal Strength
Indicator LED
One LED on
Weak reception, strength below 25%
Two LED on
Good reception, strength 50~75%
Three LED on
Excellent reception, strength 75~100%
Port & Button
1 LAN/WAN: Port for connecting to a PC, switch or router.
2 RESET: Press it for over 10 seconds until the PWR LED is no longer blinking to
restore factory default settings.
3 WPS button: Range Extender button for wireless extension.
1.3. Position Your Wireless Range Extender
For best performance, follow rules below to place your wireless range extender:
The Best Way is Half-Way
Generally, the ideal location for the range extender is half-way between your
wireless router and your Wi-Fi enabled devices. If that is not impossible, placing the
range extender closer to your wireless router will ensure better performance.
Solid Green LED
Choose a location that lights up the green signal strength LED AAA
Less Interference = More Stability
Try to position your range extender away from electrical devices that are potential
sources of interference, such as ceiling fans, home security systems, microwaves, PCs,
refrigerators, the base of a cordless phone, or a 2.4 GHz cordless phone.
Less Obstacles = Better Performance
Try to choose a location that minimizes obstacles between the range extender and
your wireless router. Open corridors and other spacious locations will typically
provide better conditions for performance than a crowded room.
Chapter 2 Internet Connection Setup
2.1. Hardware Installation
①Position the wireless Range extender close to a wireless router or access point
and then plug it into a power outlet nearby.
②Connect your Wireless Clients (such as notebook, pad, smart phone, etc.) to the
range extender wirelessly. Or you can connect your PC to the either of the two LAN
port of Range Extender with an Ethernet cable.
2.2 Connect Your Range Extender
•Method 1: Wired
Connect your Device to the range extender with an Ethernet cable.
• Method 2: Wirelessly
①Find the SSID (Network Name) printed on the label at the back of the range
extender.
②Click the network icon of your computer or go to Wi-Fi Settings of your smart
device, and then select the SSID to join the network.
• Method 3: Use the WPS button
Wireless devices that support WPS, including Router, most Android phones, tablets,
and most USB network adapters, can be connected to your repeater through this
method.
Note: -The WPS function cannot be configured if the wireless function of the router is disabled. Also,
the WPS function will be disabled if your wireless encryption is WEP. Please make sure the
wireless function is enabled and is configured with the appropriate encryption before
configuring the WPS.
①Tap the WPS button on the Router
②Within two minutes, press the WPS button on your range extender.
2.3 Log In to Your Range Extender
With a web-based utility, it is easy to configure and manage the range extender. The
web-based utility can be used on any Windows, Mac OS or UNIX OS with a web
browser, such as Microsoft Internet Explorer, Mozilla Firefox or Apple Safari.
Follow the steps below to log in to your range extender.
①Open browser
②Enter 192.168.0.2 or router.Juplink.com*[Only for v1.0.2 firmware] in the address
③Enter the Username admin and Password admin then click Login (You can modify
the login password in Page Change the Login Password)
Note: If the login window does not appear, please refer to the FAQ Section.
Chapter 3 Extender Internet Connection
3.1 Manually Set Up Internet Connection- Repeater / Client (default)
Connect your Device to the Range Extender with an Ethernet cable or via wireless
connection and Log In to Your Range Extender.
①Select Repeater - default
②Select a Wi-Fi network (SSID) you want to extend
Note: -It may take a few second to scan the network, If you can't find the signal you want to expand.
Click Site Survey button search the signal again.
③Enter the password of the Wi-Fi network you want to extend.
④Scroll to the bottom of the page and select “Save&Apply”.
Wait a moment, after theChange setting successfully! Page appears you can enjoy
your network.
3.2 Manually Set Up Internet Connection- Access Point (AP)
Connect your Device to the Range Extender with an Ethernet cable or via wireless
connection and Log In to Your Range Extender.
Note: -Before using this mode, please use an Ethernet cable to connect the Ethernet port on the
extender to a router Ethernet LAN port or a remote Ethernet LAN jack with LAN access ;
-All ports are Automatically Adjust Port. You can use any network port to connect your router
①Select Access Point (AP)
②Select Auto, Configure LAN IP address. Set the Network name (SSID), Pre-Shared
Key (password), and click the Save&Apply button to complete the setup.
Your settings are applied and the extender is ready to be used as an access point.
③Use a Wi-Fi network manager on the computer or Wi-Fi device to connect to the
new access point network.
3.2 Manually Set Up Internet Connection-Router
Connect your Device to the Range Extender with an Ethernet cable or via wireless
connection and Log In to Your Range Extender.
Note: -Before using this mode, please use an Ethernet cable to connect the Ethernet port on the
extender to a Modem Ethernet LAN port or a remote Ethernet LAN jack with LAN Access ;
-All ports are Automatically Adjust Port. You can use any network port to connect your Modem
-According to your actual condition or the mode required by your ISP. You need select Fixed IP,
Auto Config. (DHCP) or PPPoE Dial-Up. Under Router mode, Below is the detailed method of
setting.
3.2.1. Router-Auto Config. (DHCP)
①Select Auto Config. (DHCP) –default
②Set the Network name (SSID), Pre-Shared Key (password)
③Click Auto Fill button behind the MAC Address Clone, and click Save&Apply
button, Your settings are applied and the extender is ready to be used as a router.
3.2.2. Router-Fixed IP
①Select Fixed IP
②Set the Network name (SSID), Pre-Shared Key (password)
③Fill in the IP address, Subnet Mask, Default Gateway, DNS(if in need) blanks
Indice
Altri manuali Juplink Estensione
