Jura IMPRESSA S9 One Touch Manuale utente

IMPRESSA S9 One Touch–

Quick Reference Guide

The ‘IMPRESSA Manual’ together with these short instruc-

tions ‘IMPRESSA S9 One Touch – Quick Reference Guide’

hasbeenawardedthesealofapprovalbytheindependent

German Technical Inspection Agency, TÜV SÜD, due to its

easy-to-understand style, its thoroughness and coverage

of safety aspects.

IMPRESSA S9 One Touch – Quick Reference Guide

Theseshortinstructionsdonotreplacethe‘IMPRESSAS9OneTouch

Manual’. Make sure you read and observe the safety information

and warnings first in order to avoid hazards.

WhentheIMPRESSAisswitchedon,apromptfortherinseoperation

automatically appears which is initiated by pressing the mainte-

nance button.

Precondition: Your IMPRESSA is switched on at the power switch

and the on/off button Qis illuminated (standby).

Q T Press the on/off button to switch the IMPRESSA on.

WELCOME TO JURA appears briefly on the display.

HEATING UP

PRESS RINSE, the maintenance button clights up.

TPlace a receptacle under the coffee spout.

c T Press the maintenance button.

The machine rinses itself, stopping automatically.

COFFEE READY appears on the display. Your IMPRESSA

is ready to use.

YourIMPRESSAnolongerhastobedescaledifyouareusingCLARIS

filter cartridges.

EPerformthe‘Insertfilter’operationwithoutinterruptions.This

will ensure that your IMPRESSA always produces its best.

Precondition: COFFEE READY is displayed.

TOpen the cover of the Rotary Switch.

k T Keep the Rotary Switch pressed until MAINTENANCE

appears on the display.

g T Turn the Rotary Switch until FILTER NO is displayed.

k T Press the Rotary Switch to enter the programme item.

FILTER NO

g T Turn the Rotary Switch until FILTER YES is displayed.

Switching on

Using and

activating filter

IMPRESSA S9 One Touch – Quick Reference Guide

k T Press the Rotary Switch to confirm the setting.

CONFIRMED w appears briefly on the display to confirm

the setting.

INSERT FILTER / PRESS RINSE, the maintenance

button clights up.

TRemove a CLARIS filter cartridge and the filter cartridge ex-

tension from the Welcome Pack.

TFit the extension on top of the filter cartridge.

TRemove the water tank and empty it.

TLift the cartridge holder and insert the filter cartridge into

the water tank, applying slight pressure.

TClose the cartridge holder. It will click into place audibly.

TFill the water tank with fresh, cold water and reinsert.

TPlace a receptacle (at least 500 ml) under the frother.

EIfyouare using theProfessionalCappuccinoFrother,set the

selection lever of the frother to the steam position n.

c T Press the maintenance button.

FILTER RINSING, water flows out of the frother.

EYou can interrupt rinsing of the filter at any time by pressing

any button.

EThe water may be slightly discoloured. This is not harmful to

health and does not affect the taste.

Filter rinsing stops automatically after approx. 500 ml.

COFFEE READY appearsonthe display. Thefilterisnow

activated.

IMPRESSA S9 One Touch – Quick Reference Guide

EAfter 50 litres of water have flowed through, the filter will

cease to work. Your IMPRESSA will automatically prompt you

to replace the filter.

EAfter two months, the filter will cease to work. Monitor the

elapsed time by adjusting the date plate on the cartridge

holder.

EIf the CLARIS filter cartridge is not activated, you will not be

prompted to change the filter.

To change the CLARIS filter cartridge when prompted to do so by

your IMPRESSA, proceed as follows:

Precondition: COFFEE READY / CHANGE FILTER is dis-

played, and the maintenance buttonclights up.

c T Press the maintenance button.

DURATION 2 MIN. / START YES

EIfyouwanttochangethefilteratalaterpointintime,turnthe

Rotary Switchuntil START NO isdisplayed.Exit the mainte-

nanceprogrammebypressingtheRotarySwitch.Theprompt

‘Change filter’ remains on the display.

c T Press the maintenance button.

CHANGE FILTER / PRESS RINSE

TRemove the water tank and empty it.

TLift the cartridge holder.

TTake out the old CLARIS filter cartridge and the extension.

TFit the extension on top of a new filter cartridge.

TInsert the filter cartridge into the water tank, exerting slight

pressure.

TClose the cartridge holder. It will click into place audibly.

TFill the water tank with fresh, cold water and reinsert.

Changing the filter

IMPRESSA S9 One Touch – Quick Reference Guide

TPlace a receptacle (at least 500 ml) under the frother.

EIfyouare using theProfessionalCappuccinoFrother,set the

selection lever of the frother to the steam position n.

c T Press the maintenance button.

FILTER RINSING, water flows out of the frother.

EYou can interrupt filter rinsing at any time. To do this, press

any button.

EThe water may be slightly discoloured. This is not harmful to

health and does not affect the taste.

Filter rinsing stops automatically after approx. 500 ml. The

IMPRESSA heats up and is once again ready to use.

After 220 coffee preparations or 80 switch-on rinses, the IMPRESSA

will prompt you to clean it.

Ifthewrongcleaningagentisused,themachinecouldbedamaged

and/or traces of detergent could be left behind in the water.

TUse only original JURA care products.

EThe cleaning programme only lasts about 20 minutes.

EDo not interrupt the cleaning programme. The quality of

cleaning will be impaired if you do so.

EJURA cleaning tablets are available from stockists.

Precondition: COFFEE READY / CLEAN MACHINE is dis-

played, and the maintenance buttonclights up.

c T Press the maintenance button.

DURATION 20 MIN. / START YES

EIfyouwantcleanthemachineatalaterpointintime,turnthe

Rotary Switchuntil START NO isdisplayed.Exit the mainte-

nanceprogrammebypressingtheRotarySwitch.Theprompt

‘Clean machine’ remains on the display.

Cleaning the machine

CAUTION

IMPRESSA S9 One Touch – Quick Reference Guide

c T Press the maintenance button.

EMPTY TRAY

TEmpty the drip tray and coffee grounds container and put

them back into the machine.

PRESS RINSE, the maintenance button clights up.

TPlace a receptacle under the coffee spout and the frother.

c T Press the maintenance button.

CLEANS, the cleaning operation starts.

The process is interrupted. ADD TABLET / PRESS

RINSE, the maintenance button clights up.

TOpen the cover of the filler funnel for pre-ground coffee.

TInsert a JURA cleaning tablet into the filler funnel.

TClose the cover of the filler funnel.

c T Press the maintenance button.

CLEANS, water flows out of the coffee spout and the

frother several times.

EYou can follow the current status of cleaning on the progress

bar.

The process is interrupted, EMPTY TRAY.

TEmpty the drip tray and coffee grounds container and put

them back into the machine.

The cleaning operation is now complete. The IMPRESSA is

ready for use again.

The IMPRESSA builds up deposits of limescale over time and auto-

matically prompts you to descale it when necessary. The degree of

calcification depends on the degree of hardness of your water.

If the descaling agent comes into contact with the skin or eyes, this

can cause irritation.

TAvoid contact with the skin or eyes.

TRinsethedescalingagentoffwithcleanwater.Shouldyouget

any descaling agent in your eye, see a doctor.

Descaling the machine

CAUTION

IMPRESSA S9 One Touch – Quick Reference Guide

If the wrong descaling agent is used, the machine could be dam-

aged and/or traces of detergent could be left behind in the water.

TUse only original JURA ca re products.

If the descaling operation is interrupted, there may be damage to

the machine.

TAllow the descaling program to run to the end.

If the descaling agent comes into contact with sensitive surfaces,

damage cannot be ruled out.

TClean up any splashes immediately.

EThe descaling programme lasts approx. 45 minutes.

EJURA descaling tablets are available from stockists.

EIf you use a CLARIS filter cartridge and this is activated, you

will not be prompted to change the filter.

Precondition: COFFEE READY / DECALCIFY MACHINE is

displayed and the maintenance buttonclights up.

c T Press the maintenance button.

DURATION 45 MIN. / START YES

EIfyouwanttodescalethemachineatalaterpointintime,turn

the Rotary Switch until START NO is displayed. Exit the

maintenance programme by pressing the Rotary Switch. The

prompt ‘Decalcify machine’ remains on the display.

c T Press the maintenance button.

EMPTY TRAY

TEmpty the drip tray and coffee grounds container and put

them back into the machine.

SOLVENT IN TANK

TRemove the water tank and empty it.

CAUTION

IMPRESSA S9 One Touch – Quick Reference Guide

TCompletelydissolvethe contents of oneblister (3 JURAdes-

calingtablets)inacontainerthatholds600mlofwater.This

may take several minutes.

TPour the solution into the empty water tank and insert it in

the machine.

SOLVENT IN TANK / PRESS RINSE, the mainte-

nance button clights up.

TRemove the frother from the Connector System©.

TPlace a receptacle under the hot water spout and another

under the Connector System©.

c T Press the maintenance button.

DECALCS,waterflowsout of the Connector System©and

the hot water spout. The maintenance button cflashes

during the descaling operation.

EYoucanfollowthecurrentstatus of descalingontheprogress

bar.

The process is interrupted, EMPTY TRAY.

TEmpty the receptacles below the hot water spout and the

Connector System©.

TEmpty the drip tray and coffee grounds container and put

them back into the machine.

RINSE WATER TANK / FILL WATER TANK

TRemove the water tank and rinse it thoroughly.

TFill the water tank with fresh, cold water and reinsert.

PRESS RINSE, the maintenance button clights up.

TRefit the frother.

TPlaceareceptacleunder thecoffeeand hotwater spout and

another under the frother.

c T Press the maintenance button.

DECALCS,waterflowsout of the Connector System©and

the frother.

The process is interrupted, HEATING UP.

MACHINE RINSING, water flows out of the coffee

spout. The operation stops automatically, EMPTY TRAY.

IMPRESSA S9 One Touch – Quick Reference Guide

TEmpty the drip tray and coffee grounds container and put

them back into the machine.

The descaling operation is now complete. Your IMPRESSA

heats up and is once again ready to use.

EIf the descaling operation stops unexpectedly, rinse the water

tank thoroughly.

EThischapterappliestotheProfessionalandEasyCappuccino

Frothers.

Each time milk has been prepared the IMPRESSA displays a prompt

for Cappuccino rinsing.

Precondition: COFFEE READY / RINSE CAPPUCCINO is

displayed and the maintenance buttonclights up.

TPlace a receptacle under the frother.

EIf you are using the Professional Cappuccino Frother, turn

the selection lever to the steam position n.

c T Press the maintenance button.

CAPPU. RINSING, the frother is rinsed.

The procedure stops automatically. COFFEE READY

appears on the display.

EThischapterappliestotheProfessionalandEasyCappuccino

Frothers.

To ensure that the respective frother works perfectly, you should

clean it daily when you have been preparing milk.

Ifthewrongcleaningagentisused,themachinecouldbedamaged

and/or traces of detergent could be left behind in the water.

TUse only original JURA care products.

EThe IMPRESSA will not prompt you to clean the frother.

Rinsing the

cappuccino frother

Cleaning the

cappuccino frother

CAUTION

IMPRESSA S9 One Touch – Quick Reference Guide

EThe JURA Cappuccino Cleaner is available from stockists.

Precondition: COFFEE READY is displayed.

TOpen the cover of the Rotary Switch.

k T Keep the Rotary Switch pressed until MAINTENANCE

appears.

k T Press the Rotary Switch to enter the programme item.

CLEAN CAPPUCCINO

k T Press the Rotary Switch.

CLEANER FOR CAPPU., the maintenance button c

lights up.

TPour 250 ml of fresh water into a container and add one

capful (max. 15 ml) of Cappuccino Cleaner.

TImmerse the milk pipe in the receptacle with the cleaning

solution.

EIf you are using the Professional Cappuccino Frother, turn

the selection lever to the milk foam por milk tposition.

TPlace another receptacle under the frother.

c T Press the maintenance button.

CAPPUCCINO CLEANING, the frother and pipe are

cleaned.

WATER FOR CAPPUCCINO, the maintenance button

clights up.

TRinse the receptacle thoroughly, fill it with approx. 250 ml

of fresh water and immerse the milk pipe in the water.

TEmpty the other receptacle and place it under the frother

once more.

c T Press the maintenance button.

CAPPUCCINO CLEANING, the frother and pipe are

rinsed with fresh water.

COFFEE READY appears on the display. Your IMPRESSA

is once more ready to use.

Altri manuali per IMPRESSA S9 One Touch

Indice

Altri manuali Jura Macchina per il caffè

Manuali Macchina per il caffè popolari di altre marche

Taurus

Taurus Livorno 6 Manuale utente

Delta-q

Delta-q QUICK Manuale utente

Bunn

Bunn LCA-1 Guida alla risoluzione dei problemi

Black & Decker

Black & Decker BLACK DECKER HOME DE790 Istruzioni per l'installazione

Saeco

Saeco Vienna Plus Sup 018M Manuale utente

DeLonghi

DeLonghi DC300 Manuale utente

INCAPTO

INCAPTO BXCO1470E Manuale utente

Bosch

Bosch TASSIMO finesse TAS16B Series Manuale utente

Exido

Exido 245-072 Manuale utente

Animo

Animo OptiVend Choco Manuale utente

Siemens

Siemens TQ505DF Series Manuale utente

DeLonghi

DeLonghi ECI341 Manuale utente

Krups

Krups KT406511 Manuale utente

Cimbali

Cimbali M32 Classic Manuale utente

Philips

Philips HL3844N Manuale utente

Bosch

Bosch TES 515 SERIES Manuale utente

Tekmatix

Tekmatix TMFM - 65 Manuale utente

Scarlett

Scarlett SC-CM33005 Manuale utente