JVC KD-G341 Manuale utente
ENGLISH
CD RECEIVER
KD-G343/KD-G342/KD-G341
For installation and connections, refer to the separate manual.
INSTRUCTIONS
GET0484-003A
[EX/EU]
For canceling the display demonstration, see page 5.
2
ENGLISH
Warning:
If you need to operate the unit while driving, be
sure to look around carefully or you may be involved
in a traffic accident.
Information for Users on Disposal of Old
Equipment
This symbol indicates that the product with
this symbol should not be disposed as general
household waste at its end-of-life. If you wish to
dispose of this product, please do so in accordance
with applicable national legislation or other rules in
your country and municipality. By disposing of this
product correctly, you will help to conserve natural
resources and will help prevent potential negative
effects on the environment and human health.
Caution on volume setting:
Discs produce very little noise compared with other
sources. Lower the volume before playing a disc
to avoid damaging the speakers by the sudden
increase of the output level.
How to reset your unit
• Your preset adjustments will also be erased.
How to forcibly e ect a disc
• Be careful not to drop the disc when it ejects.
• If this does not work, reset your unit.
Thank you for purchasing a VC product.
Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best
possible performance from the unit.
IMPORTANT FOR LASER PRODUCTS
1. CLASS 1 LASER PRODUCT
2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to
qualified service personnel.
3. CAUTION: Visible and/or invisible class 1M laser radiation when open. Do not view directly with optical
instruments.
4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.
This symbol is only valid in
the European Union.
EN02-05_KD-G343_003A_2.indd 2EN02-05_KD-G343_003A_2.indd 2 8/17/07 10:24:49 AM8/17/07 10:24:49 AM
ENGLISH
3
How to use the M MODE button
If you press M MODE, the unit goes into functions mode,
then the number buttons and 5 / ∞ buttons will work
as different function buttons.
Ex. When number button 2 works as
MO (monaural) button.
To use these buttons for their original functions
again after pressing M MODE, wait for 5 seconds
without pressing any of these buttons until the
functions mode is cleared, or press M MODE again.
Detaching the control panel
Attaching the control panel
CONTENTS
Control panel
— KD-G 4 /KD-G 42/KD-G 41 ............. 4
Getting started ................................ 5
Basic operations ................................................... 5
Radio operations ............................. 6
FM RDS operations ........................... 7
Searching for your favorite FM RDS programme
.... 7
Disc operations ................................ 9
Playing a disc in the unit ..................................... 9
Sound adjustments .......................... 12
General settings — PSM .................. 1
Other external component operations
.... 15
Maintenance ................................... 16
More about this unit ........................ 17
Troubleshooting .............................. 19
Specifications .................................. 21
Note: Only for [EX] model users in UK and
European countries
For security reasons, a numbered ID card is provided
with this unit, and the same ID number is imprinted on
the unit’s chassis. Keep the card in a safe place, as it will
help the authorities to identify your unit if stolen.
For safety...
• Do not raise the volume level too much, as this will
block outside sounds, making driving dangerous.
• Stop the car before performing any complicated
operations.
Temperature inside the car...
If you have parked the car for a long time in hot or cold
weather, wait until the temperature in the car becomes
normal before operating the unit.
The control panel illustrations used for explanation
in this manual is of KD-G343 / KD-G341.
EN02-05_KD-G343_003A_2.indd 3EN02-05_KD-G343_003A_2.indd 3 8/24/07 12:17:26 PM8/24/07 12:17:26 PM
4
ENGLISH
; RND (random) button
a AUX (auxiliary) input jack
s Disc information indicators—
TAG (Tag information), (track/file), (folder)
d DISC indicator
f Playback mode / item indicators—RND (random),
(disc), (folder), RPT (repeat)
g RDS indicators—AF, REG, TP, PTY
h Tuner reception indicators—MO (monaural),
ST (stereo)
j LOUD (loudness) indicator
k EQ (equalizer) indicator
l Tr (track) indicator
/ Source display / Track number / Folder number /
Volume level indicator / Time countdown indicator
z Main display
x Sound mode (c-EQ: custom equalizer) indicators—
AZZ, ROCK, HIP HOP, CLASSIC, POPS, USER
Parts identification
Display window
Control panel — KD-G343/KD-G342/KD-G341
1 0 (eject) button
2 4 / ¢ buttons
3 Loading slot
4 (standby/on attenuator) button
5 BAND button
6 Display window
7 T/P (traffic programme/programme type) button
8 DISP (display) button
9 5(up)/∞(down) buttons
p (control panel release) button
q SRC (source) button
w Control dial
e SEL (select) button
r M MODE button
t EQ (equalizer) button
y MO (monaural) button
u SSM (Strong-station Sequential Memory) button
i Number buttons
RPT (repeat) button
EN02-05_KD-G343_003A_2.indd 4EN02-05_KD-G343_003A_2.indd 4 8/17/07 10:24:53 AM8/17/07 10:24:53 AM
ENGLISH
5
Basic settings
• See also “General settings — PSM” on
pages 13 – 15.
1
2
1 Canceling the display demonstrations
Select “DEMO,” then “DEMO OFF.”
2 Setting the clock
Select “CLOCK H” (hour), then adjust the hour.
Select “CLOCK M” (minute), then adjust the
minute.
Select “24H/12H,” then “24H” (hour) or
“12H” (hour).
3 Finish the procedure.
To check the current clock time while the
power is turned off
Clock time is shown on the
display for about 5 seconds. See
also page 13.
Getting started
Basic operations
~ Turn on the power.
Ÿ
* You cannot select “CD” as the playback source if
there is no disc in the unit.
! For FM/AM tuner
⁄ Ad ust the volume.
@ Ad ust the sound as you want. (See
page 12.)
To drop the volume in a
moment (ATT)
To restore the sound, press the
button again.
To turn off the power
Volume level appears.
EN02-05_KD-G343_003A_2.indd 5EN02-05_KD-G343_003A_2.indd 5 8/17/07 10:24:54 AM8/17/07 10:24:54 AM
6
ENGLISH
When an FM stereo broadcast is hard to
receive
Reception improves, but the stereo effect will be lost.
To restore the stereo effect, repeat the same
procedure. “MONO OFF” appears and the MO indicator
goes off.
Storing stations in memory
You can preset si stations for each band.
FM station automatic presetting —
SSM (Strong-station Sequential
Memory
1 Select the FM band (FM1 – FM3 you want to
store into.
2
3
“SSM” flashes, then disappears when automatic
presetting is over.
Local FM stations with the strongest signals are
searched and stored automatically in the FM band.
Radio operations
~
Ÿ
! Start searching for a station.
When a station is received, searching stops.
To stop searching, press the same button
again.
To tune in to a station manually
In step ! above...
1
2 Select a desired station frequency.
Lights up when receiving an FM stereo
broadcast with sufficient signal strength.
Lights up when monaural mode is activated.
EN06-13_KD-G343_003A_2.indd 6EN06-13_KD-G343_003A_2.indd 6 8/17/07 10:25:30 AM8/17/07 10:25:30 AM
7
ENGLISH
Manual presetting
E .: Storing the FM station of 92.5 MHz into preset
number 4 of the FM1 band.
1
2
3
Listening to a preset station
1
2 Select the preset station (1 – 6 you want.
To check the current clock time while
listening to an FM (non-RDS or AM station
• For FM RDS stations, see page 9.
FM RDS operations
What you can do with RDS
RDS (Radio Data System) allows FM stations to send an
additional signal along with their regular programme
signals.
By receiving the RDS data, this unit can do the
following:
• Programme Type (PTY) Search (see the following)
• TA (Traffic Announcement) and PTY Standby
Receptions (see pages 8, 9, and 14)
• Tracing the same programme automatically
—Network-Tracking Reception (see page 9)
• Programme Search (see pages 9 and 14)
Searching for your favorite
FM RDS programme
You can tune in to a station broadcasting your favorite
programme by searching for a PTY code.
• To store your favorite programme types, see the
following.
~ The last selected PTY code
appears.
Ÿ Select one of your favorite programme
types.
or
Select one of the PTY codes (see
page 9 .
Preset number flashes for a while.
Frequency Ô Clock
Continued on the next page
EN06-13_KD-G343_003A_2.indd 7EN06-13_KD-G343_003A_2.indd 7 8/17/07 10:25:33 AM8/17/07 10:25:33 AM
8
ENGLISH
Using the standby receptions
TA Standby Reception
TA Standby Reception allows the unit to switch
temporarily to Traffic Announcement (TA) from any
source other than AM.
The volume changes to the preset TA volume level if the
current level is lower than the preset level (see
page 14).
To activate TA Standby Reception
The TP (Traffic Programme) indicator
either lights up or flashes.
• If the TP indicator lights up, TA Standby Reception is
activated.
• If the TP indicator flashes, TA Standby Reception is
not yet activated. (This occurs when you are listening
to an FM station without the RDS signals required for
TA Standby Reception.)
To activate TA Standby Reception, tune in to another
station providing these signals. The TP indicator will
stop flashing and remain lit.
To deactivate the TA Standby Reception
The TP indicator goes off.
PTY Standby Reception
PTY Standby Reception allows the unit to switch
temporarily to your favorite PTY programme from any
source other than AM.
To activate and select your favorite PTY code for
PTY Standby Reception, see page 14.
The PTY indicator either lights up or flashes.
• If the PTY indicator lights up, PTY Standby Reception
is activated.
• If the PTY indicator flashes, PTY Standby Reception is
not yet activated.
To activate PTY Standby Reception, tune in to
another station providing these signals. The PTY
indicator will stop flashing and remain lit.
! Start searching for your favorite
programme.
If there is a station broadcasting a programme
of the same PTY code as you have selected, that
station is tuned in.
Storing your favorite programme
types
You can store si favorite programme types.
Preset programme types in the number buttons
(1 to 6 :
1 Select a PTY code (see pages 7 and 8 .
2 Select the preset number (1 – 6 you want to
store into.
3 Repeat steps 1 and 2 to store other PTY codes
into other preset numbers.
4 Finish the procedure.
E .: When “ROCK M” is selected
EN06-13_KD-G343_003A_2.indd 8EN06-13_KD-G343_003A_2.indd 8 8/17/07 10:25:34 AM8/17/07 10:25:34 AM
9
ENGLISH
To check the current clock time while
listening to an FM RDS station
PTY codes
NEWS, AFFAIRS, INFO, SPORT, EDUCATE, DRAMA,
CULTURE, SCIENCE, VARIED, POP M (music), ROCK M
(music), EASY M (music), LIGHT M (music), CLASSICS,
OTHER M (music), WEATHER, FINANCE, CHILDREN, SOCIAL,
RELIGION, PHONE IN, TRAVEL, LEISURE, JAZZ, COUNTRY,
NATION M (music), OLDIES, FOLK M (music), DOCUMENT
Disc operations
Playing a disc in the unit
~ Turn on the power.
Ÿ
All tracks will be played repeatedly until you
change the source or eject the disc.
To deactivate the PTY Standby Reception, select
“OFF” for the PTY code (see page 14). The PTY indicator
goes off.
Tracing the same programme—
Network-Tracking Reception
When driving in an area where FM reception is not
sufficient enough, this unit automatically tunes in to
another FM RDS station of the same network, possibly
broadcasting the same programme with stronger
signals (see the illustration below).
When shipped from the factory, Network-Tracking
Reception is activated.
To change the Network-Tracking Reception
setting, see “AF-REG” on page 14.
Programme A broadcasting on different frequency areas
(01 – 05)
Automatic station selection—
Programme Search
Usually when you press the number buttons, the preset
station is tuned in.
If the signals from the FM RDS preset station are not
sufficient for good reception, this unit, using the AF
data, tunes in to another frequency broadcasting the
same programme as the original preset station is
broadcasting.
• The unit takes some time to tune in to another
station using programme search.
• See also page 14.
Station name (PS = Station
Frequency = Programme
type (PTY = Clock = (back to
the beginning)
Continued on the next page
EN06-13_KD-G343_003A_2.indd 9EN06-13_KD-G343_003A_2.indd 9 8/17/07 10:25:35 AM8/17/07 10:25:35 AM
10
ENGLISH
Other main functions
Skipping tracks quickly during play
• For MP3 or WMA discs, you can skip tracks within the
same folder.
E .: To select track 32 while playing a track whose
number is a single digit (1 to 9)
1
2
Each time you press the button, you can skip 10
tracks.
• After the last track, the first track will be selected
and vice versa.
3
Prohibiting disc ejection
You can lock a disc in the loading slot.
To cancel the prohibition, repeat the same
procedure.
To stop play and eject
the disc
• Press SRC to listen to
another playback source.
To fast-forward or reverse
the track
To go to the next or
previous track
To go to the next or
previous folder (only for
MP3 or WMA discs
To locate a particular track (for CD or folder
(for MP3 or WMA discs directly
To select a number from 01 – 06:
To select a number from 07 – 12:
• To use direct folder access on MP3/WMA discs, it
is required that folders are assigned with 2-digit
numbers at the beginning of their folder names—01,
02, 03, and so on.
To select a particular track in a folder
(for MP3 or WMA disc):
EN06-13_KD-G343_003A_2.indd 10EN06-13_KD-G343_003A_2.indd 10 8/17/07 10:25:36 AM8/17/07 10:25:36 AM
Altri manuali per KD-G341
1
Questo manuale è adatto per i seguenti modelli
2
Indice
Altri manuali JVC Ricevitore per auto
