JVC KD-R516 Manuale utente
ENGLISH
INDONESIA
GET0634-004A
[UN]
EN, IN
1209DTSMDTJEIN© 2009 Victor Company of Japan, Limited
For canceling the display demonstration, see page 4. / Untuk membatalkan tampilan demonstrasi,
lihat halaman 4.
CD RECEIVER / ALAT PENERIMA CD
KD-R516 / KD-R515
INSTRUCTIONS
BUKU PETUNJUK
For installation and connections, refer to the separate manual.
Untuk instalasi dan penyambungan, lihat buku pedoman terpisah.
Having TROUBLE with operation?
Please reset your unit
Refer to page of How to reset your unit
Ada MASALAH dengan cara
pengoperasian?
Setel kembali unit Anda
Lihat halaman mengenai Bagaimana mereset unit anda
CoverRear_KD-R516_004A_f.indd 1-2CoverRear_KD-R516_004A_f.indd 1-2 11/4/09 4:45:37 PM11/4/09 4:45:37 PM
2ENGLISH
Thank you for purchasing a JVC product.
Please read all instructions carefully before operation, to ensure your complete understanding and
to obtain the best possible performance from the unit.
IMPORTANT FOR LASER PRODUCTS
1.CLASS 1 LASER PRODUCT
2.CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave
all servicing to qualified service personnel.
3.CAUTION: Visible and/or invisible class 1M laser radiation when open. Do not view directly with
optical instruments.
4.REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.
[European Union only]
Warning:
If you need to operate the unit while driving,
be sure to look around carefully or you may be
involved in a traffic accident.
For safety...
• Do not raise the volume level too much, as
this will block outside sounds, making driving
dangerous.
• Stop the car before performing any
complicated operations.
Temperature inside the car...
If you have parked the car for a long time in
hot or cold weather, wait until the temperature
in the car becomes normal before operating
the unit.
How to read this manual
The following icons/symbols are used to
indicate:
Press and hold the button(s)
until the desired operation
begins.
Turn the control dial.
Turn the control dial
to make a selection,
then press to confirm.
( XX) Reference page number
<XXXX> Menu setting item
Continued on the next page
[Hold]
EN02-09_KD-R516_001A_1.indd 2EN02-09_KD-R516_001A_1.indd 2 11/4/09 12:52:15 PM11/4/09 12:52:15 PM
3ENGLISH
CONTENTS
2 How to read this manual
3 How to attach/detach the control
panel
3 How to reset your unit
3 How to forcibly eject a disc
4
Canceling the display
demonstration
4 Setting the clock
5 Preparing the remote controller
(RM-RK50)
6 Basic operations
7 Listening to the radio
9 Listening to a disc
10 Listening to the USB device
11 Listening to the other external
components
12 Selecting a preset sound mode
13 Menu operations
18 Maintenance
19 More about this unit
21 Troubleshooting
24 Specifications
How to attach/detach the control
panel
How to reset your unit
Your preset adjustments
will also be erased.
How to forcibly eject a disc
• You can forcibly eject the loaded disc even
if the disc is locked. To lock/unlock the disc,
9.
• Be careful not to drop the disc when it ejects.
• If this does not work, reset your unit.
[Hold]
EN02-09_KD-R516_001A_1.indd 3EN02-09_KD-R516_001A_1.indd 3 11/4/09 12:52:16 PM11/4/09 12:52:16 PM
4ENGLISH
1 Turn on the power.
2
3
Setting the clock
1 Turn on the power.
2
3 Select <CLOCK>.
4 Select <CLOCK SET>.
5 Adjust the hour.
6 Adjust the minute.
7 Finish the procedure.
4 Select <DEMO OFF>.
5
6 Finish the procedure.
Canceling the display demonstration
(Initial setting)
[Hold]
(Initial setting)
[Hold]
EN02-09_KD-R516_001A_1.indd 4EN02-09_KD-R516_001A_1.indd 4 11/4/09 12:52:16 PM11/4/09 12:52:16 PM
5ENGLISH
Warning (to prevent accidents and
damage):
• Do not install any battery other than CR2025
or its equivalent.
• Do not leave the remote controller in a place
(such as dashboards) exposed to direct
sunlight for a long time.
• Store the battery in a place where children
cannot reach.
• Do not recharge, short, disassemble, heat the
battery, or dispose of it in a fire.
• Do not leave the battery with other metallic
materials.
• Do not poke the battery with tweezers or
similar tools.
• Wrap the battery with tape and insulate when
throwing away or saving it.
This unit is equipped with the steering wheel
remote control function.
Before operating, connect an exclusive remote
adapter (not supplied) which matches your car
to the steering wheel remote input terminal on
the rear of the unit.
• For details, refer also to the instructions
supplied with the remote adapter.
Preparing the remote controller (RM-RK50)
When you use the remote controller for the first
time, pull out the insulation sheet.
If the effectiveness of the remote controller
decreases, replace the battery.
Replacing the lithium coin battery
CR2025
Caution:
• Danger of explosion if battery is incorrectly
replaced. Replace only with the same or
equivalent type.
• Battery shall not be exposed to excessive heat
such as sunshine, fire, or the like.
Insulation sheet
EN02-09_KD-R516_001A_1.indd 5EN02-09_KD-R516_001A_1.indd 5 11/4/09 12:52:17 PM11/4/09 12:52:17 PM
6ENGLISH
Basic operations
Control dial
Ejects the disc Loading slot USB (Universal Serial Bus) input jack
Display window
Auxiliary
input jack
Detaches the panel
When you press or hold the following button(s)...
Main unit Remote
controller General operation
Turns on.
• When the power is on, pressing /I/ATT on the remote controller
also mutes the sound or pauses. Press /I/ATT again to cancel
muting or resume playback.
Turns off if pressed and held.
Selects the available sources (if the power is turned on).
• If the source is ready, playback also starts.
Adjusts the volume level.
— Selects items.
—
• Mutes the sound while listening to a source. If the source is “CD”
or “USB,” playback pauses. Press the control dial again to cancel
muting or resume playback.
• Confirms selection.
Selects the sound mode.
• Enters tone level adjustment directly ( 12) if pressed and held
EQ/BASS-TRE on the main unit.
Remote sensor
• DO NOT expose to bright sunlight.
EN02-09_KD-R516_001A_3.indd 6EN02-09_KD-R516_001A_3.indd 6 11/25/09 9:07:40 AM11/25/09 9:07:40 AM
7ENGLISH
Manual search
“M” flashes, then press
the button repeatedly.
When an FM stereo broadcast is
hard to receive
1
2
]
<TUNER>
]
<MONO>
]
<MONO ON>
Reception improves, but stereo effect
will be lost.
To restore the stereo effect, repeat the same
procedure to select <MONO OFF>.
Automatic presetting (FM)—
SSM (Strong-station Sequential Memory)
You can preset up to 18 stations for FM.
While listening to a station...
1
2
]
<TUNER>
]
<SSM>
]
<SSM 01 – 06> / <SSM 07 – 12> /
<SSM 13 – 18>
“SSM” flashes and local stations with
the strongest signals are searched and
stored automatically.
To preset another 6 stations, repeat the above
procedure by selecting one of the other 6 SSM
setting ranges.
Main unit Remote
controller General operation
—• Enters <COLOR> setting directly ( 16).
•
Enters <COLOR SETUP> setting directly ( 17) if pressed and held.
— Returns to the previous menu.
—Power off : Checks the current clock time.
Power on : Changes the display information.
[Hold]
[Hold]
[Hold]
Listening to the radio
~
]
“FM” or “AM”
Ÿ
“ST” lights up when receiving an FM stereo broadcast
with sufficient signal strength.
EN02-09_KD-R516_001A_1.indd 7EN02-09_KD-R516_001A_1.indd 7 11/4/09 12:52:18 PM11/4/09 12:52:18 PM
8ENGLISH
Manual presetting (FM/AM)
You can preset up to 18 stations for FM and 6
stations for AM.
Ex.: Storing FM station of 92.50 MHz into preset
number “04.”
1
]
“92.50MHz”
2
“PRESET MODE” flashes.
3
]
Selects preset number “04.”
“P04” flashes and “MEMORY” appears.
Selecting a preset station
or
1
2
Changing the display information
Station name *
=
Frequency
=
Clock
=
(back to the beginning)
* If no title is assigned to a station, “NO NAME”
appears for a few seconds.
Using the remote controller
5
U
/
D
∞
: Changes the preset
stations
2
R
/
F
3
: Searches for stations
[Hold]
Title assignment
You can assign titles up to 30 station
frequencies (FM and AM) using 8 characters
(maximum) for each title.
• If you try to assign titles to more than 30
station frequencies, “NAME FULL” appears.
Delete unwanted titles before assignment.
1
]
“FM” or “AM”
2
]
Show the title entry screen.
3
]
Select a character.
4
]
Move to the next (or previous)
character position.
5Repeat steps 3and 4until you have
finished entering the title.
6
To erase the entire title, press and hold
DISP
after step 2, then press the control dial.
Available characters
ABCDEFGH I
JKLMNOPQR
STUVWXYZ0
123456789
—/ <> Space
[Hold]
EN02-09_KD-R516_001A_3.indd 8EN02-09_KD-R516_001A_3.indd 8 11/25/09 9:08:41 AM11/25/09 9:08:41 AM
9ENGLISH
Caution on volume setting:
Discs produce very little noise compared
with other sources. Lower the volume before
playing a disc to avoid damaging the speakers
by the sudden increase of the output level.
Stopping playback and ejecting
the disc
“NO DISC” appears.
Press /
SOURCE
to listen to
another playback source.
Prohibiting disc ejection
To cancel the prohibition, repeat the same
procedure.
Selects folder of the MP3/WMA
Selects track
Fast-forwards or
reverses the track
Selecting a track/folder
For MP3/WMA discs, select the desired folder,
then the desired track by repeating the control
dial procedures.
• To return to the previous menu, press
BACK
.
Selecting the playback modes
You can use only one of the following playback
modes at a time.
1
2
]
“REPEAT”
j
“RANDOM”
3
REPEAT
TRACK RPT : Repeats current track
FOLDER RPT : Repeats current folder
RANDOM
FOLDER RND : Randomly plays all tracks
of current folder, then
tracks of next folders
ALL RND : Randomly plays all tracks
To cancel repeat play or random play, select
“RPT OFF” or “RND OFF.”
Listening to a disc
~
]
Turn on the power.
Ÿ
All tracks will be played repeatedly until you change
the source or eject the disc.
[Hold]
[Hold]
[Hold]
EN02-09_KD-R516_001A_1.indd 9EN02-09_KD-R516_001A_1.indd 9 11/4/09 12:52:18 PM11/4/09 12:52:18 PM
10 ENGLISH
Listening to the USB device
This unit can play MP3/WMA tracks stored in a USB device.
~
]
Turn on the power.
Ÿ
All tracks will be played repeatedly until you change the
source or detach the USB device.
Caution on volume setting:
USB devices produce very little noise compared
with other sources. Lower the volume before
playing a USB to avoid damaging the speakers
by sudden increase of the output level.
If you have turned off the power (without
detaching the USB device)...
Pressing
/SOURCE
turns on the power and
playback starts from where it has been stopped
previously.
• If a different USB device is currently attached,
playback starts from the beginning.
USB input jack
USB memory
Changing the display information
Disc title/Album name/performer (folder
name)*
=
Track title (file name)*
=
Current
track number with the elapsed playing time
=
Current track number with the clock
time
=
(back to the beginning)
* If the current disc is an audio CD, “NO NAME”
appears.
If an MP3/WMA file does not have Tag
information or <TAG DISPLAY> is set to
<TAG OFF> ( 13), folder name and file name
appear.
Using the remote controller
5
U
/
D
∞
: Selects folder of the
MP3/WMA
2
R
/
F
3
: Selects track
2
R
/
F
3
[Hold]
: Fast-forwards or
reverses the track
Stop playing and detaching the
USB device
Straightly pull it out from the unit.
“NO USB” appears. Press
/SOURCE
to listen to
another playback source.
You can operate the USB device in the same
way you operate the files on a disc. ( 9)
EN10-17_KD-R516_001A_3.indd 10EN10-17_KD-R516_001A_3.indd 10 11/25/09 9:09:49 AM11/25/09 9:09:49 AM
Altri manuali per KD-R516
1
Questo manuale è adatto per i seguenti modelli
1
Indice
Lingue:
Altri manuali JVC Ricevitore per auto
JVC
JVC KD-R951BT Manuale utente
JVC
JVC KD-S707R Manuale utente
JVC
JVC KD-ADV6270 Manuale utente
JVC
JVC KD-X152M Manuale utente
JVC
JVC KS-FX850R Manuale utente
JVC
JVC KW-XC777 - Radio / CD Manuale utente
JVC
JVC GET0188-001A Manuale utente
JVC
JVC KD-G200 Manuale utente
JVC
JVC KS-F315EE Manuale utente
JVC
JVC KW-HDR81BT Manuale utente
