JVC KD-SX875 Manuale utente
ENGLISH
GET0020-001A
[U]
For customer Use:
Enter below the Model No. and
Serial No. which are located on
the top or bottom of the cabinet.
Retain this information for future
reference.
Model No.
Serial No.
CD RECEIVER KD-SX975/KD-SX875
8 9 10 11 127
SCAN MO
INT
DISP
SCM
8 9 10 11 127
SCAN MO
INT
DISP
SCM
4V OUT
KD-SX875
KD-SX975
CD !" KD-SX975/KD-SX875
∂“¥„Ë´’¥ KD-SX975/KD-SX875
INSTRUCTIONS
!"
§”·π–π”
For installation and connections, refer to the separate manual.
!"#$%&'()*+,-./0
°√ÿ≥“¥Ÿ§ŸË¡◊Õ∑’Ë·¬°µË“ßÀ“° „π°“√µ‘¥µ—Èß·≈–°“√‡ ◊ËÕ¡µËÕ
‰∑¬
coverKD-SX975/SX875[U] 18/1/01, 08:533
2
ENGLISH
How to reset your unit
After detaching the control panel, press
the reset button on the panel holder using a
ball-point pen or similar tool.
This will reset the built-in microcomputer.
Note:
Your preset adjustments – such as preset
channels or sound adjustments will also
be erased.
BEFORE USE
*For safety....
• Do not raise the volume level too much, as this
will block outside sounds, making driving
dangerous.
• Stop the car before performing any complicated
operations.
*Temperature inside the car....
If you have parked the car for a long time in hot
or cold weather, wait until the temperature in the
car becomes normal before operating the unit.
EN02-05KD-SX975/SX875[U]f 18/1/01, 08:562
3
ENGLISH
To be continued on the next page
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to
ensure your complete understanding and to obtain the best possible performance from the unit.
CONTENTS
How to reset your unit .................................................................... 2
BASIC OPERATIONS .................................................... 5
RADIO OPERATIONS ................................................... 6
Listening to the radio ..................................................................... 6
Storing stations in memory ............................................................ 7
FM station automatic preset: SSM .............................................. 7
Manual preset .............................................................................. 8
Tuning into a preset station ........................................................... 9
Other convenient tuner functions ............................................... 10
Scanning broadcast stations ..................................................... 10
Selecting FM reception sound ................................................... 10
CD OPERATIONS ...................................................... 11
Playing a CD ................................................................................. 11
Locating a track or a particular portion on a CD ..................... 12
Selecting CD playback modes ..................................................... 13
Prohibiting CD ejection ............................................................... 14
SOUND ADJUSTMENTS ............................................. 15
Adjusting the sound ...................................................................... 15
Turning on/off the BBEII function ............................................... 16
Using the Sound Control Memory (SCM) .................................. 17
Storing your own sound adjustments ......................................... 19
OTHER MAIN FUNCTIONS ......................................... 20
Setting the clock ............................................................................ 20
Changing the general settings (PSM) ........................................ 21
Basic Procedure ........................................................................ 21
Canceling Advanced SCM ......................................................... 23
Selecting the level display ......................................................... 23
Selecting the dimmer mode (ONLY FOR KD-SX975) ............... 24
Turning on/off the key-touch tone .............................................. 24
Selecting the telephone muting ................................................. 25
Selecting the external component to use .................................. 25
Detaching the control panel ......................................................... 26
REMOTE OPERATIONS .............................................. 27
Installing the battery .................................................................... 27
Using the remote controller ......................................................... 28
EN02-05KD-SX975/SX875[U]f 18/1/01, 08:563
4
ENGLISH
CD CHANGER OPERATIONS ...................................... 29
Playing CDs ................................................................................... 29
Selecting CD playback modes ..................................................... 31
EXTERNAL COMPONENT OPERATIONS ...................... 32
Playing an external component ................................................... 32
MAINTENANCE ........................................................ 33
Handling CDs ................................................................................ 33
TROUBLESHOOTING ................................................. 34
SPECIFICATIONS ....................................................... 35
EN02-05KD-SX975/SX875[U]f 18/1/01, 08:564
5
ENGLISH
BASIC OPERATIONS
1
Turn on the power.
“HELLO” appears on the display.
2
Select the source.
To operate the tuner, see pages 6 – 10.
To operate the CD player, see pages 11 – 14.
To operate the CD changer, see pages 29 – 31.
To operate the external component, see page 32.
3
Adjust the volume.
4
Adjust the sound as you want (see pages 15 – 19).
To drop the volume in a moment
Press briefly while listening to any source. “ATT”starts flashing on the display, and
the volume level will drop in a moment.
To resume the previous volume level, press the button briefly again.
To turn off the power
Press for more than 1 second. “SEE YOU”appears, then the unit turns off.
Note on One-Touch Operation:
When you select a source in step 2 below, the power automatically comes on.
You do not have to press this button to turn on the power.
CAUTION on Volume Setting
CDs produces very little noise compared with other sources. If the volume level is adjusted for the
tuner, for example, the speakers may be damaged by the sudden increase in the output level.
Therefore, lower the volume before playing a CD and adjust it as required during playback.
1
32
Note:
When you use this unit for the
first time, set the built-in clock
correctly, see page 20.
Volume level appears
Volume level indicator
EN02-05KD-SX975/SX875[U]f 18/1/01, 08:565
6
ENGLISH
RADIO OPERATIONS
Listening to the radio
1
Select the band (FM1, FM2, FM3 or AM).
You can select any one of FM1, FM2, and FM3 to listen to an
FM station.
2
Start searching a station.
While searching stations, “SEEK” appears on
the display.
When a station is received, searching stops.
To stop searching before a station is received, press the same button you have pressed
for searching.
To tune in a particular frequency without searching
1Press FM/AM repeatedly to select the band (FM or AM).
2Press and hold ¢or 4until “MANU (manual)” starts flashing on the display.
Now you can manually change the frequency while “MANU” is flashing.
3Press ¢or 4repeatedly until the frequency you want is reached.
• If you hold down the button, the frequency keeps changing until you release the button.
FM1 FM2 FM3 AM
Audio (see page 23) or
volume level indicator.
Selected band appears.
To search stations
of higher
frequencies.
12
To search stations
of lower
frequencies.
EN06-10KD-SX975/SX875[U]f 18/1/01, 08:596
7
ENGLISH
1
Select the FM band number (FM1, FM2 or
FM3) you want to store FM stations into.
2
Press and hold both buttons for more than
2 seconds.
Local FM stations with the strongest signals are searched and stored automatically in the
band number you have selected (FM1, FM2 or FM3). These stations are preset in the number
buttons — No. 1 (lowest frequency) to No. 6 (highest frequency).
When automatic preset is over, the station stored in number button 1 will be automatically
tuned in.
Storing stations in memory
You can use one of the following two methods to store broadcasting stations in memory.
• Automatic preset of FM stations: SSM (Strong-station Sequential Memory)
• Manual preset of both FM and AM stations
FM station automatic preset: SSM
You can preset 6 local FM stations in each FM band (FM1, FM2 and FM3).
FM1 FM2 FM3 AM
“SSM” appears, then disappears when
automatic preset is over.
12
EN06-10KD-SX975/SX875[U]f 18/1/01, 08:597
8
ENGLISH
1
Select the FM1 band.
2
Tune into a station of 88.3 MHz.
See page 6 to tune into a station.
3
Press and hold the number button (in this
example, 1) for more than 2 seconds.
4
Repeat the above procedure to store other
stations into other preset numbers.
Notes:
• A previously preset station is erased when a new station is stored in the same preset number.
• Preset stations are erased when the power supply to the memory circuit is interrupted (for example,
during battery replacement). If this occurs, preset the stations again.
Manual preset
You can preset up to 6 stations in each band (FM1, FM2, FM3 and AM) manually.
EXAMPLE: Storing an FM station of 88.3 MHz into the preset number 1 of the FM1 band
132
Selected band and “MEMO”
flash alternately for a while.
EN06-10KD-SX975/SX875[U]f 18/1/01, 08:598
9
ENGLISH
Tuning into a preset station
You can easily tune into a preset station.
Remember that you must store stations first. If you have not stored them yet, see pages 7
and 8.
1
Select the band (FM1, FM2, FM3 or AM)
you want.
2
Select the number (1 – 6) for the preset station
you want.
12
FM1 FM2 FM3 AM
EN06-10KD-SX975/SX875[U]f 18/1/01, 08:599
10
ENGLISH
Scanning broadcast stations
When you press SCAN/RPT (Scan/Repeat) while listening to the radio, station scanning
starts. Each time a broadcast is tuned in, scanning stops for about 5 seconds (“SCAN” flashes
on the display), and you can check what program is now being broadcast.
If you want to listen to that program, press the same button again to stop scanning.
Selecting FM reception sound
When an FM stereo broadcast is hard to receive:
Press MO/RND (Mono/Random) while listening to an FM stereo broadcast. The MONO
indicator lights up on the display.
The sound you hear becomes monaural but reception will be improved.
To restore the stereo effect, press the same button again.
Other convenient tuner functions
SCAN/RPT MO/RND
MO
Lights up when receiving an FM broadcast in stereo.
EN06-10KD-SX975/SX875[U]f 18/1/01, 08:5910
Questo manuale è adatto per i seguenti modelli
3
Indice
Altri manuali JVC Ricevitore per auto
JVC
JVC KDBT1 - Radio / CD Manuale utente
JVC
JVC KD-S100 - CD Receiver Manuale utente
JVC
JVC EXAD KD-NX901 Manuale utente
JVC
JVC KD-DV9402 Guida
JVC
JVC KD-LH70R Manuale utente
JVC
JVC KD-AHD69 Manuale utente
JVC
JVC KD-AVX11 - EXAD - DVD Player Guida
JVC
JVC KD-FX321 Manuale utente
JVC
JVC GET0483-001A Manuale utente
JVC
JVC KS-F363R Manuale utente
