JW Electronics Co., Ld. SEEDIQ-External Manuale utente
REV
Document nember:DN-S40008-10
RELEASE DATE:2009/ 6 /10
MODIFY DATE:
SATA over Ethernet with
-1 10/100/1000 Mbps LAN Port
1.0
JW Electronics Co.,Ld.
SEEDIQ-External
User Menu
-1 e-SATA Port(SATA 1.5Gbps /SATA II )
第 1 頁，共 16 頁
PAGE
2
3
3
4
5 ~ 16
5
6
7
7
8 ~ 11
12 ~ 13
14 ~ 15
15
16
16
5.6 miniSAN Disk Administration Function
2.Product Specification
1.Contents
3.Package Contents
4.Product Introduction
1.CONTENTS
5. SEEDIQ-External Install Basic Step
5.1 Minimum System Request
5.2 SEEDIQ-External Basic Install Flow Chart
5.3 Hardware Configuration
5.4 Install "miniSAN " in Windows XP & Vista
5.5 miniSAN Easy Application Guide
5.7 miniSAN Disk Tool Option Function
5.8 miniSAN Disk Tool About function
5.9 Uninstall miniSAN
5.10 miniSAN Other Needing Attention Iten
第 2 頁，共 16 頁
◎
◎
◎
◎
◎
◎
◎
◎Website: http://www.jwe.com.tw
◎E-MAIL: [email protected]
Quantity
1
1
1
1
1
Weight： 115g
Dimension：76mm(L)X93mm(W)X23.3mm(H)
AOE SEEDIQ-External V1.1
Goods Name
2.PRODUCT SPECIFICATION
Product Name：SEEDIQ-External
Work system：Windows Vista/XP
Transmission Interface：10/100/1000Mbps LAN Port.
e-SATA Port (SATA 1.5 Gbps & SATA II Support)
Suitable in 2.5", 3.5", SATA HDD
Operating temperature：0°~40°C (32°~104°F)
3.PACKAGE CONTENTS
CD(The with Driver and User Menu)
DC Adapter (5V/1.2A)
e-SATA cable 100CM
RJ45 CAT 5e UTP cable 100CM
第 3 頁，共 16 頁
1.
2.
3.
4.
A
DAPTOR DC-JACK
e-SATA Port (LINK e-SATA H.D.D)
10/100/1000Mbps RJ45 LAN Port
POWER / STATUS LED
4.PRODUCT INTRODUCTION
4.1 SEEDIQ-External Product Introduction
1
4
3
2
第 4 頁，共 16 頁
★ Quickly Install
400 MHz Pentium® III or higher
4.2.3 Lan Active LED(RJ45 Right Side LED)
" Power ON " Light "Red color";If e-SATA H.D.D Link Ready ,the LED tureed into Light Blue.
Windows® XP / Vista .
5.1 Minimum System Request
4.2.1 Power / SATA Status LED：Red
/
Blue
The e-SATA H.D.D read or write，LED is blink.
1000Mbps Link OK，the LED Light "Green"color;if Link is 100Mbps or 10Mbps，the LED Off.
If Lan Active(Read or Write) ，the LED is Green Blink.
128 MB RAM (256 MB recommended)
10/100/1000Base-T Full Duplex Ethernet Card or Switch Hub.
4.2 SEEDIQ-External LED Introduction
5.SEEDIQ-External INSTALL BASIC STEP
4.2.2 1000Mbps Link LED(RJ45 Left Side LED)
第 5 頁，共 16 頁
5.2 SEEDIQ-External Basic Install Flow Chart
※If you must use "mini SAN" disk management further function,Please see…
5.6 mini SAN Disk Management Further Function。
5.7 mini SAN Disk Tools Software Selection Setting。
NO
YES
NO
YES
YES
YES
NO
NO
YES
NO
Install "mini SAN" in Windows and Vista
Link Gigabit LAN Port
LED have light Blue
from Red color?
Use"mini SAN"
discover Disk?
START
"mini SAN" install
ok?
Link e-SATA
p
ort
&
H.D.D
DC-JACK Connection Power Adapter
Open "mini SAN" program
Disk Mount ok?
1.Selection "My Computer" on windows。
2.Push Right Key on mouse, selection
"
Manage
"
。
1.Selection "Disk Manage"。
2.AOE Disk add "Disk division"。
3.AOE Disk Format。
Create New
"Disk Name" ok?
Create "AOE Disk" ok.
The Device is Ready。
END
Check & reconnect
Gigabit Lan Port & e-
SATA Port & e-SATA
H
.
DD
&
Power
。
第 6 頁，共 16 頁
- Find miniSAN Install driver in the driver CD, double click .
- "Power ON" ,the Power/SATA Status LED is light Red color;if SATA Disk Ready,the LED turn to
- Install Shield Wizard will appear. Click the Next button to continue to next step 。(Don't Double install)
-Click the Finish button to complete .
-Click on the Yes button to restart your computer now, or No to restart later .（Propose reboot）
-SEEDIQ-External plug in CAT 5e or CAT6 cable to Gigabit LAN Port and link up PC or 10/100/1000Mbps
- SEEDIQ-External DC-JACK connection to Power Adapter.
Blue color at 11 seconds later .
5.4 Install "miniSAN" in Windows XP & Vista
- Check 10/100/1000Mbps,if 1000Mbps Link ok, the RJ45 Left Side LED light Green LED.
5.3 Hardware Configuration
- SEEDIQ-External e-SATA Port Link up e-SATA Cable & e-SATA Disk.
Switch Hub.
- Accept License Agreement and the click Next to continue installation.
- Click the Install button to install drivers .
-Click Continue Anyway to continue installation .
第 7 頁，共 16 頁
2. The miniSAN Application tool will pop on the desktop and auto discover all miniSAN Disk Mac Address
network.
3. Press discover button can research the miniSAN Disk on the network.
-Mouse Right Click on the miniSAN controller Icon located on the system tray , and select the
5.5 miniSAN Easy Application Guide
-When software installation is completed, Reboot the PC,you will find a miniSAN Disk Administrator
Tool icon on the system tray.
miniSAN item .(The miniSAN Device Management can be running)
1. Mouse Left Click on the miniSAN Device Management Icon located on the system tray.
5.5.2 Mount miniSAN Disk
1. Mouse Left Click on the miniSAN Device Management Icon located on the system tray .
2. The miniSAN Application tool will pop on the desktop and list all miniSAN Disk Mac Address in the
-miniSAN Application Tool performs the following functions：(See 5.5.1 ~ 5.5.8)
5.5.1 Discover miniSAN Disk
in the network.
第 8 頁，共 16 頁
3. Select your target disk to access:
- Select the target disk and click mouse right to show the target disk function window.
key registration .
- If user entered the right access key and didn’t have the R/W key, the target disk just can mount
at one time)
- Select Mount Disk for disk access .
- If user mount the target disk to Read/Write mode, the miniSAN Disk is registered as Read / Write
- If others user mount the target disk to Read/Write mode, the miniSAN Disk is registered as Read Only
Mode and show the blue icon.
Note: miniSAN Authentication Access Kay and Write Key is set on "miniSAN Disk Administration
Mode and show the green icon.(mini SAN will create one management as use Read /write Function
- If the miniSAN Disk manager set the Authentication Key, the tool will pop a register window for
- If user didn’t have access key, the target disk will not be mounted .
to Read Only mode .
- If user entered the right access key and R/W key, the target disk could mount Read/Write mode .
Function " step 5.6.2 .
第 9 頁，共 16 頁
Gray
Green
Blue
Red
: Access mode
5.5.3 Display miniSAN Disk used capacity status
- User can access the miniSAN Disk using Read/Write mode .
: Read Only mode
- User can access the miniSAN Disk using Read Only mode.
: Unrecognized Mode
- miniSAN Disk lost connecting .
- miniSAN Disk have some error and can’t access.
- HDD broken or HDD interface have some problems .
5.5.4 Reload Disk function
- Read Only mode disk can reload the disk to Read/Write mode by reload function.
- Mounted R/W mode user didn’t have reload function.
- Select the target disk to press reload button.
5.5.5 Unmount miniSAN Disk
- miniSAN Disk would be removed from the PC.
- User can’t reload to R/W mode when the R/W mode user is accessing the target disk.
- User can’t reload to R/W mode when user don’t have R/W key registration.
- Read Only mode disk will refresh disk data for data synchronize.
- Select the target remove disk to press unmount button.
- miniSAN Disk can be enable to access mode if disk mount .
- miniSAN Disk is disabled from your computer .
miniSAN Disk manager will show the disk used capacity and used percentage icon when disk mounted.
Below is describing each of the miniSAN Disk Device Modes and the icons that correspond with each mode:
: Disable mode
第 10 頁，共 16 頁
Indice
Manuali Hardware di rete popolari di altre marche
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Manuale utente
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Manuale utente
Yudor
Yudor YDS-16 Manuale utente
D-Link
D-Link ShareCenter DNS-320L Manuale utente
Samsung
Samsung ES1642dc Istruzioni per l’uso
Honeywell Home
Honeywell Home LTEM-PV Istruzioni per il montaggio
