K-Mate BTH109R Manuale utente

BTH109R

True Wireless Bluetooth Headset

User’s manual

Contents

◼Brief introduction…………...…………………………..…... 1

◼Before use……………………………………………………. 1

1. Overview…………………………………………………...……1

2. Charging for headset..……………………………………………2

◼Getting started……..…………………………………………3

1. Wearing headset............................................................ .........3

2. Use one piece earbuds...............................................................3

3. Use two earbuds..........................................................................4

4. Two earbuds connecting........................................................5

5. Operation....................................................................................6

6. Battery display....................................................................... ......10

7. Prompt tone.......…………………………………………….....10

8. Factory Reset………………………....……………………..…..11

◼Care and maintenance……………………………..……….12

◼FAQs……………………………………...…………………..12

◼Specification……………………………...………………..…13

Welcome to use this True Wireless Bluetooth headset, BTH109R. Please

read this user’s manual carefully before use.

◼Brief introduction

BTH109R is a True Wireless Bluetooth Headset without any wire,each piece

comes with one Mic that can be used individually or be used together for

stereo sound.The headset support music and calling function.

◼Before use

1. Overview

MFB touch-button

LED indicator

Microphone

Power on/off button

Ear tips

Four different size ear tips

Charging jack

2. Charging for headset

When the headset is battery low, the headset emits “Battery low” every 2

minutes and the red LED slowly flash four times every minutes. Please

recharge the battery of the headset.

The way of charging as following:

Using USB cable

1. Plug the USB charging cable to headset charging jack

2. Plug another side of cable to the USB port of PC

Red light on: Charging

Red light off: Finish charging

3. It will takes about 1.5 hours to finish charging

Remarks:

1) The battery is recyclable.

2) Batteries (battery pack or batteries installed) shall not be exposed to

excessive heat place, such as sunshine, fire or the like.

◼Getting started

1. Wearing headset

a. Choose the suitable size of ear tips

b. Wear the headset of L and R accordingly,adjust each earbuds for your ear

to get best experience

Left ear Right ear

2.Use one earbud

In this mode, only one earbud of the headset connecting with device.

1) Power on

Press power button about 3s and release it till blue LED on, and earbud

prompt “Power on”.

2) Pairing

Power off mode:Press power button about 5s, release it

till red and blue LED flash alternately, earbud will

prompt “Pairing”.

3) Connecting

a. Make sure the earbud in pairing mode.

b. Turn on the Bluetooth function of cellphone, search the Bluetooth name

of earbud and connect it.

Bluetooth name of earbud : BTH109R-L for left earbud, BTH109R-R for

right earbud.

4) Power off

Press power button about 5s and release it till red LED on,and earbud

prompt “Power off”.

Remark:

◆Right earbud will automatically connect with the latest Bluetooth device

when power on.

◆Left earbud need to make it enter pairing mode and connect with

cellphone again when power on.

◆If earbud disconnected with last connected devices after power on, the

earbud will enter pairing mode automatically, and then switch to standby

mode, the last will power off automatically after 5 minutes to save power.

◆The operation are same for each earbud.

3.Use two earbuds

Use two earbuds simultaneously to enjoy stereo sound.

Connecting

1) The Master headset is right earbud. Long press power button of right

earbud about 5s to make it into pairing mode.

2) Turn on the Bluetooth function of cellphone, search the Bluetooth name

of earbud “BTH109R-R”and connect it.

3) Then turn on the left earbud, the two earbuds will connect with each other

automatically.

Remarks:

◆The earbuds will power off if no devices can be connected in pairing

mode within 1 minute.

◆After connected successfully, the earbuds and cellphone will remember

each other. It will connect with the latest device automatically when

power on.

◆When the earbuds out of range and disconnected with device. It will

connect with devices automatically if return back to effective range

within 5 minutes.

4.Two earbuds connecting

Please follow this step if two earbuds can not be connected with

each other.

1) Power off two earbuds.

2) Reset two earbuds: long press power button of left/right earbuds about

16s, the red and blue LED will flash simultaneously in two time.

3) Power on two earbuds again, it will enter TWS pairing mode (red and

blue LED slowly flash alternatively) and connect with each other

automatically.

4) After TWS connected successfully, the master earbud (Right side) will

prompt “True wireless stereo is connected”/“Pairing”and the red and blue

LED will quickly flash alternatively (ready to pair with cellphone). The

slave earbud (left side) will prompt “True wireless stereo is connected”and

the blue LED flash twice every 10s.

Remarks:

◆The two earbuds is set to connect with each other in factory.

◆You can connect the two earbuds according above operation if they failed

connecting.

◆In true wireless stereo mode, only right earbud can be connected with left

earbud and cellphone simultaneously, the left earbud only can be

connected with right earbud.

5.Operation

1) One earbuds connecting with cellphone

a.Answer a call

Incoming calling (blue LED quickly flash),click touch button once will

answer a call.

Click once

b.End a call

During calling (blue LED flash twice every 10s), double click touch button

will end a call.

Double click

c.Reject calling

Incoming calling(blue LED quickly flash), long press touch button and

release it till hear prompt tone.

Long press about 1 second

d.Call transfer

During calling (blue LED flash twice every 10s), long press touch button of

Right earbud will transfer call between cellphone and earbud.

Long press about 2 second

e.Voice assistant

After connect with cellphone (blue LED flash twice every 10s),then press

touch button of left earbud three times can active voice assistant, you will

hear a prompt tone.

Click three times

f.Volume up

Playing music or during calling (blue LED flash twice every 10s),click

touch button of left earbud once to volume up, you will hear a prompt tone.

Click once

g.Volume down

Playing music or during calling (blue LED flash twice every 10s),long press

touch button of left earbud to volume down, you will hear a prompt tone.

Long press

h.Playing/Pause

Connecting with cellphone,double click touch button will play/pause music.

Double click

i.Last song

Playing music mode (blue LED flash twice every 10s),press touch button of

right earbud three times,you will hear a prompt tone.

Click three times

Indice

Manuali Cuffia popolari di altre marche

Sena

Sena SMH10 Manuale utente

IASUS

IASUS Stealth IA-NT4-BASIC-BT Manuale utente

Sennheiser

Sennheiser EPOS ADAPT 230 Manuale utente

Doro

Doro Flexus HS2005 Manuale utente

GE 98971 Manuale utente

Hama

Hama 00184070 Manuale utente

Plantronics

Plantronics Blackwire 3200 Series Manuale utente

Blue Tiger

Blue Tiger Advantage PLUS Manuale utente

Jawbone

Jawbone Icon Manuale utente

Jabra

Jabra FR 20 Manuale utente

Roxcore

Roxcore Flow A+ Manuale utente

Turtle Beach

Turtle Beach XP 510 Manuale utente

Philips

Philips SHB6101 Manuale utente

Jabra

Jabra PRO 9460 Duo Manuale utente

HyperX

HyperX HyperX Cloud Flight Manuale utente

Bose

Bose MIE2 Mobile Manuale utente

Jabra

Jabra Steel Manuale utente

HyperX

HyperX cloud ii Manuale utente