Kaba Generation E-760 AUTO DEADBOLT ASM Office Manuale utente

Generation E-760 Installation Instructions

for Auto Deadbolt, Ofﬁce and Storeroom

STEPS FOR AUTO DEADBOLT ASM • MODELS 76016 & 76017

If not already installed at the factory, put the

thumbturn in the vertical position and install all four

(4)parts (M) as shown, on the inside trim assembly.

Turn the thumbturn all the way to the right for a RH

installation (arrow onM2points UP), or all the way

to the left for a LH installation (arrow onM2points

DOWN). The thumbturn should stop in the vertical

position, and the stopper cam (M2) will be in the posi-

tion illustrated.

Place 3 spacers (S) on the door (for recent models

only). Place the inside trim assembly on the door so

that the upper and lower spindles (F) and (G) engage

the thumbturn and the inside lever. Fasten to the

outside housing using the three 1/8” hex head

mounting screws (I).

Apply the privacy thumbturn sticker as shown. If

in doubt as to the direction of the arrow, press the

auxiliary latch (X) to extend the deadbolt, and verify in

which direction to rotate the thumbturn to reach the

horizontal (privacy) position.

M4

M1

M2

M3

Install clip

M1diagonally

on hub

(TOP)

RH

LH

RH/LHR LH/RHR

X

F

I

G

I

S

S

STEPS FOR ASM OFFICE • MODELS 76112 & 76113

DO THE FOLLOWING BEFORE PLACING THE INSIDE

TRIM ASSEMBLY ON THE DOOR:

Install only parts (M3and M4) as shown, on the

inside trim assembly.

STEPS FOR ASM/ESM STOREROOM • MODELS 76112, 76113, 76131

DO THE FOLLOWING BEFORE PLACING THE INSIDE

TRIM ASSEMBLY ON THE DOOR:

M4

M3

Install M3onto M4, then slide both parts

onto the thumbturn.

Install M2onto M4, then slide both parts

onto the thumbturn.

The thumbturn should be locked in the

vertical position.

M4

M1M2

PK2990/08/12 - GENERATION E-760 INSTALLATION INSTRUCTIONS

Call 1-877-468-3555

or 1-514-340-9025

Put the thumbturn in the vertical position and install

only parts (M2 and M4) as shown, on the inside trim

assembly. The notch on the stopper cam (M2) must

engage the tab on the plate (M4), so that the thumbturn

is locked in the vertical position.

Technical Support

Questo manuale è adatto per i seguenti modelli

6

Indice

Altri manuali Kaba Serratura

Kaba

Kaba 52 Manuale utente

Kaba

Kaba E-Flash EF680 Manuale utente

Kaba

Kaba E-PLEX 2000 Manuale utente

Kaba

Kaba 5402 Series Manuale utente

Kaba

Kaba 1435MID Manuale utente

Kaba

Kaba X-09 Manuale utente

Kaba

Kaba LA GARD COMBOGARDPRO Manuale utente

Kaba

Kaba Simplex 3000 Series Manuale utente

Kaba

Kaba C-lever compact Manuale utente

Kaba

Kaba Confidant RFID Kit 1 Manuale utente

Kaba

Kaba 7102 series Manuale utente

Kaba

Kaba E-Plex 5x63 Manuale utente

Kaba

Kaba Simplex 8100 Series Manuale utente

Kaba

Kaba Simplex Mechanical Pushbutton Locks Manuale utente

Kaba

Kaba Quantum Series Manuale utente

Kaba

Kaba Simplex 1000 Series Guida all'installazione

Kaba

Kaba Simplex 8100 Series Manuale utente

Kaba

Kaba LA GARD 1947 Manuale utente

Kaba

Kaba 7004 Series Manuale utente

Kaba

Kaba 4000 Manuale utente

Kaba

Kaba 7006 Series Manuale utente

Kaba

Kaba Simplex 6200 Series Manuale utente

Kaba

Kaba Simplex 506 Series Manuale utente

Kaba

Kaba Simplex 1000 Series Manuale utente

Manuali Serratura popolari di altre marche

Magic

Magic 105 Manuale utente

Gantner

Gantner GAT NET.Lock 7020 System Guida rapida

Wittkopp

Wittkopp Insys 7202 Manuale utente

Dorma

Dorma Studio Classic Manuale utente

Securam

Securam ECSL-601 Manuale utente

Sudhaus

Sudhaus 3003 Manuale utente

Safety 1st

Safety 1st 48517 Manuale utente

Pado

Pado FDS-10 Manuale utente

Esco

Esco systeQ Series Manuale utente

COMPX

COMPX National D8951 Manuale utente

secureo

secureo Key Box Manuale utente

Stock Loks

Stock Loks C8713 Manuale utente

COMPX

COMPX 1T-058 Manuale del proprietario

Auslock

Auslock T11 Manuale utente

ELCOM

ELCOM 7205 Manuale utente

Stealth SAFES

Stealth SAFES ShadowVault Manuale utente

Knox

Knox KeySecure 5 Manuale utente

Kwikset

Kwikset 48334/01 Manuale utente