KAESER SIGMA CONTROL BUB 82 Series Manuale utente
Service manual
Controller
SIGMA CONTROL BUB 82.XX
7_7000_0 11USE
/KKW/SSC 1.01 en 01 BA-SIGMA CONTROL
Quick user guide
Controller
SIGMA CONTROL BUB 82.XX
7_7000_0 11 USE
1. Important settings ............................................................................................................. 1
2. Changing the display language ........................................................................................ 2
3. Entering and displaying passwords .................................................................................. 3
4. Adjusting the system setpoint pressure ........................................................................... 4
5. Activating the «clock» key ................................................................................................ 5
6. Activating the «remote control» key ................................................................................. 6
7. Changing the control mode .............................................................................................. 7
8. Outputting important operational states of the machine ................................................... 8
9. Resetting maintenance interval counters ......................................................................... 9
10. Displaying messages ....................................................................................................... 10
11. Pressure relief valve checking ......................................................................................... 11
12. Checking the temperature sensor and overheating shutdown function ........................... 13
Contents
7_7000_0 11 USE
Quick user guide Controller
SIGMA CONTROL BUB 82.XX i
Contents
ii Quick user guide Controller
SIGMA CONTROL BUB 82.XX 7_7000_0 11 USE
1 Important settings
In this chapter, important or often used settings are explained in brief. Detailed information on function,
configuration, fault removal and important instructions concerning safe operation are found in sub‐
sequent chapters.
Setting and other work on the machine may only be carried out by the following persons:
■ persons trained on the machine/controller and persons instructed by and under the super‐
vision of a specialist,
■ trained technicians,
■ authorized service personnel.
1 Important settings
7_7000_0 11 USE
Quick user guide Controller
SIGMA CONTROL BUB 82.XX 1
2 Changing the display language
1. In the main menu, press the «UP» key until the current language appears.
8 8 p s i g 1 7 6 ° F
→ D e u t s c h ↲ Current language
– – – – – – – – – –
2. Press «Enter».
3. Keep on pressing the «DOWN» or «UP» key until the required language appears.
4. Press «Enter» to accept the language.
The language is now set.
5. Press the «Escape» key as often as necessary to return to the main menu.
2 Changing the display language
2Quick user guide Controller
SIGMA CONTROL BUB 82.XX 7_7000_0 11 USE
3 Entering and displaying passwords
The following passwords have been entered in the controller at the factory:
Level 0 Level 4
password 00000 12EXP
Tab. 1 Passwords
1. In the main menu, keep pressing the «UP» key until
password
appears in the third line of the
display.
2. Press «Enter».
8 8 p s i g 1 7 6 ° F
p a s s w o r d
X X X X X L 0 ↲
X X X X X L 0 Current level
3. Press «Enter».
An inverse cursor appears.
4. Keep on pressing the «DOWN»or «UP» key until the required character appears.
5. Press «Enter».
The cursor jumps to the next password character.
6. Set the remaining characters of the password until it is complete.
After entering the last character the activated password level is displayed.
7. Press the «Escape» key as often as necessary to return to the main menu.
3 Entering and displaying passwords
7_7000_0 11 USE
Quick user guide Controller
SIGMA CONTROL BUB 82.XX 3
4 Adjusting the system setpoint pressure
The information relates to settings for a compressor. Vacuum pumps or other devices should be
treated accordingly.
Precondition Password level 4 is activated.
Select menu configuration > press. settings.
1. In the main menu, keep pressing the «UP» key until
configuration
appears in the third line of
the display.
2. Press «Enter».
press. settings
appears in the display.
3. Press «Enter».
compressor
appears in the display.
4. Press «Enter».
8 8 p s i g 1 7 6 ° F
s e t p o i n t p r e s s .
p 1 S P : 8 0 p s i g Current system setpoint pressure p1 (example)
S D : – 7 . 3 p s i g Current switching differential p1 (example)
Setting system setpoint pressure and switching differential for p1
1. Press «Enter» to adjust the value for setpoint p1.
An inverse cursor appears.
2. Adjust the value with the «UP» or «DOWN» key.
3. Press the «Enter» key to accept the value.
4. Press the «DOWN» key once.
8 8 p s i g 1 7 6 ° F
p 1 S P : 8 8 p s i g Changed system pressure setpoint
S D : – 7 . 3 p s i g Current switching differential p1
p 2 S P : 1 0 4 p s i g Current system setpoint pressure p2
5. Press «Enter» to adjust the value for switching differential p1.
An inverse cursor appears.
6. Adjust the value with the «UP» or «DOWN» key.
7. Press the «Enter» key to accept the value.
8. If necessary, adjust the value for p2 in the same way.
Further information See chapter 7.3 for all machine pressure parameters and their adjustment.
4 Adjusting the system setpoint pressure
4Quick user guide Controller
SIGMA CONTROL BUB 82.XX 7_7000_0 11 USE
Indice
Altri manuali KAESER Controllori
