1 . DUTY OF TAKIN CARE BY THE USER
The
circular knife sharpening machine RMS-CNC
has been constructed under
consideration of an endangering analysis and carefull selection of observed harmonized
norms, as well as further specifications.
The RMS-CNC meets the stat of the art and grants a maximum of safety. The safety can
only be achieved in daily work, when all neccessary steps are taken. It is the duty of
taking care by the user to plan and control these steps.
The user has to take care that:
• the machine is used as directed (see chapter "Directed use")
• the machine is used in flawless workable condition, especially the safety
installations are checked regularly for their function
• requested personal safety equipment for the operator is available and used
• the operation manual is always kept in a readable condition, complete and
available near the machine
• all safety and warning instructions are not removed from the machine and kept
readable
4
2. DEMANDS OF THE OPERATIN PERSONNEL
Only persons who are familiar with this manual and safety advises and take notice, are
allowed to work with the RMS-CNC.
3. TRANSPORT
The circular knife sharpening machine RMS-CNC is delivered in a wooden box on pallet.
The gross weight of the machineis around 300 Kg. The transport is done with a pallet by
lifting cart or fork-lift truck directly to the installation site.
Before the first start, check the machine for transport damages!
In case of a transport damage, immendiately contact the forwarding agency to protocol
the damage.
Please pay attention: The deadlines for claims are quite short!
4. DIMENSIONS AND WEI HT
Dimensions L x W x H: 900 x 700 x 1 540 mm
Weight net without control unit: 225 Kg
Weight net of the control unit: 37 Kg
