Kanardia BLU Manuale utente
BLU & Kanja — Manual
Kanardia d.o.o.
January 2020
©
Kanardia d.o.o.
Revision 1.3
BLU & Kanja — Manual
Contact Information
Publisher and producer:
Kanardia d.o.o.
Lopata 24a
SI-3000
Slovenia
Tel: +386 40 360 512
Email: info@kanardia.eu
A lot of useful and recent information can be also found on the In-
ternet. See http://www.kanardia.eu for more details.
Copyright
This document is published under the Creative Commons, Attribution-
ShareAlike 3.0 Unported licence. Full license is available on
http://creativecommons.org/licenses/by-sa/3.0/legalcode web
page and a bit more human readable summary is given on
http://creativecommons.org/licenses/by-sa/3.0/. In short, the
license gives you right to copy, reproduce and modify this document
if:
you cite Kanardia d.o.o. as the author of the original work,
you distribute the resulting work only under the same or similar
license to this one.
Credits
This document was written using TeTeX (L
A
T
EX) based document
creation system using Kile running on Linux operating system. Most
2
©
Kanardia 2020
BLU & Kanja — Manual
of the figures were drawn using Open Office Draw and Inkscape appli-
cations. Photos and scanned material was processed using Gimp.All
document sources are freely available on request under the licence
mentioned above and can be obtained by email. Please send requests
to info@kanardia.eu.
Revision History
The following table shows the revision history of this document.
Rev. Date Description
1.3 February 2020 Revised with LaTeX
3
©
Kanardia 2020
BLU & Kanja — Manual CONTENTS
Contents
1 Introduction 6
1.1 General Description . . . . . . . . . . . . . . . . . . . 6
2 Software Installation 6
2.1 System Requirements . . . . . . . . . . . . . . . . . . 6
2.2 Application Installation . . . . . . . . . . . . . . . . 6
2.3 Kanja Application Updates . . . . . . . . . . . . . . 8
3 Hardware Installation 9
4 Kanja App User Interface 10
4.1 Connection and Device Scanning . . . . . . . . . . . 10
4.2 Info ........................... 11
4.3 Update Devices . . . . . . . . . . . . . . . . . . . . . 12
4.3.1 Downloading Firmware . . . . . . . . . . . . . 12
4.3.2 Updating Units with New Firmware . . . . . . 13
4.4 Console ......................... 14
4.5 ICan........................... 14
4.6 Engine Time Settings . . . . . . . . . . . . . . . . . . 15
4.7 DaquOptions...................... 15
4.7.1 Reset Channels . . . . . . . . . . . . . . . . . 16
4.7.2 Offset ...................... 16
4.7.3 Tank....................... 17
4.8 Digi Screen Layout Change . . . . . . . . . . . . . . 20
4.9 Engine Time Change . . . . . . . . . . . . . . . . . . 21
4
©
Kanardia 2020
BLU & Kanja — Manual 1. Introduction
1 Introduction
First of all, we would like to thank you for choosing Kanardia.
1.1 General Description
Kanardia BLU is a CAN-to-Bluetooth interface which in combina-
tion with Kanja Android application provides ability to upgrade and
configure any CAN based Kanardia product.
2 Software Installation
2.1 System Requirements
To run Kanja application and control Kanardia devices with BLU
interface you will need:
Android version 4.4 (api19) or higher mobile phone or tablet,
WiFi/3G data connection,
Bluetooth v2.1 or later.
2.2 Application Installation
1. Download the “Kanja.apk” file from http://horis.kanardia.
eu/Database/Kanja.apk to your Android device. Scan QR
code bellow to access above link in your preferred browser.
6
©
Kanardia 2020
BLU & Kanja — Manual 2.2 Application Installation
2. Open/run “Kanja.apk” file. If the system shows the “Install
blocked” message click on “Settings” button and temporary
enable installation of applications from sources other than the
Play Store.
3. Click on “Install” button to start installation. Click on “Done”
button once the installation complete dialog is shown.
7
©
Kanardia 2020
BLU & Kanja — Manual 2.3 Kanja Application Updates
2.3 Kanja Application Updates
Kanja app is frequently updated. The latest version can be installed
from Kanja itself by following next steps:
Make sure your Android device is connected to the Internet and
start Kanja.
Select “tools” icon from top left corner of the screen to open
up a list of options.
Select the “Update Kanja” option. This will download new
app.
After downloading, the system will ask for confirmation.
Once installation of new update has been completed, close all
Kanja apps.
Finally, start Kanja again.
8
©
Kanardia 2020
BLU & Kanja — Manual 3. Hardware Installation
3 Hardware Installation
BLU dongle has to be connected to Kanardia CAN network. Nor-
mally the easiest way to do it is to connect it in a place where RJ45
CAN bus terminator plug is connected. Shortly after the power is
applied to Kanardia devices (CAN network) the BLU will indicate
initialization routine by blinking red and blue LEDs. Once the ini-
tialization is complete the blue LED will blink in a rate of one blink
per second.
9
©
Kanardia 2020
BLU & Kanja — Manual 4. Kanja App User Interface
4 Kanja App User Interface
Kanja is an Android application used for configuring and monitoring
Kanardia CAN instruments via BLU interface.
4.1 Connection and Device Scanning
1. Connect the BLU device into desired Kanardia CAN network/de-
vice.
2. Power on the Kanardia CAN network/device.
3. Make sure that the BLU initializes properly (blue LED blinking
in a rate one blink per second).
4. Run the “Kanja” application on host Android system.
5. Click the “Scan” button to start scanning for Bluetooth devices
and wait few seconds until the Kanardia BLU device appears
on the device list. Note: Make sure that the Bluetooth module
is enabled on host Android device.
6. Select the “Kanardia BLU” device.
7. Click on “Connect” button.
10
©
Kanardia 2020
Altri manuali per BLU
1
Questo manuale è adatto per i seguenti modelli
1
Indice
