Please be noted that the lock will not accept any user
code but programming code only in vacation mode.
{programming code}, disable vocation mode.
7. How to enable button beeps (on & off)
Function Code: 6
{programming code}+{6}, toggle beep on/off.
8. How to enable/disable passage mode
Function Code: 8
1.{programming code}+{8}, turn passage mode on/off.
2. Unlock the lock with any user code, press #until there
is a long beeps, that means passage mode set
successfully.
Please be noted that the lock would not re-lock automatic while
passage mode disable, user can re-lock it by press star key ‘*’on the
keypad manually.
9. How to enroll/unenroll lock to Z-wave network
Enroll
Put the Z-wave controller into enroll mode
Input {programming code} + {0} --- lock is into enroll mode
a. If the lock has not been enrolled with any other gateway or
have been enrolled with the same gateway, the lock sounds
long beep indicating unenroll successfully.
b. If the lock has been enrolled with other gateway, lock sounds
a short beep after 5 sec indicating enroll unsuccessfully.
Unenroll operation is needed at first.
Unenroll
Put the Z-wave controller into unenroll mode
Input {programming code } + {0 } --- lock is into unenroll mode
a. If lock has been enrolled with any other gateway, lock sounds
a long beep after 5 sec indicating unenroll successfully.
