3. Connecting PlayIt:
What You Need to Get PlayIt Installed and Connected:
The PlayIt,
TV / LCD Monitor with HDMI interface,
HDMI cable,
An Internet connection:
An Ethernet Hub, Switch or IP sharing device or
A WIFI/WLAN Connection
A segment of Cat.5 UTP cable for connecting to hub or switch (needed only when you
choose wired connection)
A Power Adapter.
A Google Gmail account for logging into the Android system.
(Please register for a free Gmail account: www.gmail.com, if you do not have one.)
Connecting Kloud Camera, HDMI connectors to the PlayIt:
Applying Power to the PlayIt:
Connect DC Jack of the power adapter into the PlayIt and plug the Adapter end into an AC
power outlet.
Connecting PlayIt to your Local Area Network:
If you use Wired LAN connection:
Connect one end of the Cat.5 UTP cable to your Ethernet Hub or Switch.
Connect the other end of the UTP cable to the Ethernet port on the rear panel of the
PlayIt.
If you use Wireless LAN connection, make sure a WiFi Access Point or an IP Sharing device
with WiFi support is in place and ready for the PlayIt to get connected.
