KaZAM blinki Manuale utente
Owner’s Manual
Please read and fully understand this manual
before operaon
This manual contains important safety, assembly
operaon and maintenance informaon.
Save this manual for future reference.
2
Owner’s Manual Index
Your Bike
Bicycle Idenficaon Record ................................................................. 3
Fing the Rider to the Bicycle............................................................... 3
Warning and Safety Informaon ........................................................... 4
Rules of the Road............................................................................... 4, 5
The Owner’s Responsibility.................................................................... 5
Bicycle Assembly
Parts Assembly View.............................................................................. 6
Parts Assembly List ................................................................................ 7
Introducon ........................................................................................... 8
Tools Needed ......................................................................................... 8
Assemble the Front Wheel to the Fork.................................................. 9
Handlebar and StemInstallaon ......................................................... 10
Tesng Stemand Handlebar Tightness ............................................... 11
Care & Cleaning Instrucons ............................................................... 11
Light Insert Installaon ................................................................... 12,13
Seat Installaon ................................................................................... 14
Front and Rear Reflector Installaon................................................... 14
Maintenance and Service
Repair and Service ............................................................................... 15
Inspecon of the Bearings ................................................................... 15
Tires ..................................................................................................... 16
Phantoms Frames Warranty
Limited Warranty.............................................................................17,18
3
Bicycle Identication Record
NOTE: This informaon can only be found on the bicycle itself, and is
not available from Kazam
Each bicycle has a Serial
Number placed on the frame.
The serial number can be found on
a scker on the boom of the
frame as shown (1).
Write this number below to keep it for future reference. If the bike is
stolen, give this number to the police to help them find the bicycle.
Model/Serial Number:
Purchase Date:
Model Name:
Fitting the Rider to the Bicycle
To determine the correct size of bicycle for the rider:
Straddle the assembled bicycle with feet shoulder width apart and
flat on the ground.
There must be at least 1 inch (2.5 cm) of clearance
(1) between the highest part of the top tube (2) and
the crotch of the rider with res properly inflated.
The minimum leg-length for the rider is the
highest part of the top tube plus one inch (3).
4
Warning and Safety Information
This symbol is important. See the word “CAUTION” or “WARNING”
which follows it.
The word “CAUTION”is used before mechanical instructions. If these
instructions are not obeyed, mechanical damage or failure of the bicycle
can occur.
The word “WARNING” is used before personal safety instructions. If these
instruction are not followed, injuries to the rider or others can occur.
Adult assembly is required.
Continuous adult supervision is required.
Do not add a motor to the product.
Do not tow or push the product.
Do not modify the product.
Replace worn or broken parts immediately.
If anything does not operate properly, discontinue use.
Rules of the Road
WARNING: Failure of the rider to follow the “Rules of the Road” listed
below can result in injury to the rider or to others.
Obey all traffic regulations, signs, and signals.
Ride on the correct side of the road, in a straight line, and in single file.
Avoid riding at night, dusk, dawn and any other time of poor visibility.
Always wear a bicycle helmet in compliance with CPSC safety
standards, as well as your local safety standards.
Always wear shoes.
5
Rules of the Road ‐ Continued
Use extra caution in wet weather conditions:
Ride slowly and use caution on damp surfaces because the tires will
slide more easily.
Avoid the hazards listed below to prevent loss of control or damage to
your wheels:
Be aware of drain grates, soft road edges, gravel or sand, pot holes
or ruts, wet leaves, or uneven paving.
To prevent loss of control, cross railroads at a right angle.
Avoid unsafe actions while riding.
Do not carry any passengers.
Do not attach anything to your bicycle or carry any items that could
impair your vision, hearing, or control.
Always ride with both hands on the handlebars.
The Owner’s Responsibility
WARNING: This bicycle is not made to withstand the abuse of
jumping and stunting. It is made to be ridden by one rider at a time for
general transportation and recreational use.
It is the owner’s responsibility to follow all assembly and adjustment
instructions exactly as written in this manual, and any “Special Instructions”
supplied and to make sure all fasteners and components are securely
tightened, if the bicycle was purchased unassembled.
NOTE: Periodically check that all fasteners and components are tightened
securely.
6
Fig 01
No.
Description
No.
Description
1
Frame
15
Rear Light Assembly
2
Fork
16
Rear Light Gasket
3
Handlebar
17
Rear Baeries (x3) not included
4
Grips (x2)
18
Rear Baery Clip
5
Stem
19
Seat Pin
7
Seat
20
Wheel Retainer (x4)
9
Seat Post
21
Wheel Nut (x4)
10
Headset
22
Wheel Assembly (x2)
11
Front Light Assembly
23
Tire (x2)
12
Front Light Gasket
24
Tube (x2)
13
14
Front Baery Tray
Front Baeries (x3) not included
8
Introduction
This Owner’s Manual is made for several different bicycles:
Use the index page to locate specific sections of this manual.
Some illustrations may vary slightly from the actual product.
Completely follow instructions.
If your bicycle includes any parts that are not described in this manual,
look for separate “Special Instructions” that are supplied with the
bicycle.
Not all models include all features, components and accessories.
Before beginning assembly or maintenance please read through this
entire manual
Refer to a local bike shop if you are not confident with assembling this
bicycle.
WARNING: Keep small parts away from children during assembly.
NOTE: All of the directions (right, left, front, rear, etc.) in this manual are as
seen by the rider while seated on the bicycle.
To prevent disposal or loss of parts of the bicycle, do not dispose of the
carton and packaging until you have completed the assembly of the bicycle.
Tools Needed
Adjustable Wrench
(Jaws must open at least 14 00)
2.5 mm Hex Wrench
5.0 mm Hex Wrench
6.0 mm Hex Wrench
Phillips Screwdriver
14 mm Socket Wrench
9
Assemble the Front Wheel to the Fork
1. If the Axel Nuts (21) are already attached to the front wheel axel, begin
by removing them with an open end wrench or adjustable wrench.
2. Place the wheel into the front fork (2) (fig 02)
3. Install wheel retainers (20) making sure the tabs are in the fork (D) tab
holes.
4. Tighten Axel Nuts to 13 ft‐lbs.
Fig 02
NOTE: Ensure wheel spins freely without making contact with the fork.
WARNING: Do not use Nuts (21) without serrations to attach the
front wheel
WARNING: Place the wheel in the center of the fork and tighten both
nuts to the recommended torque of 13 ft‐lbs.
WARNING: Failure to follow these steps can allow the wheel to
loosen while riding. This can cause injury to the rider or to others.
10
Handlebar and Stem Installation
WARNING: To prevent loss of control and steering system damage,
the “MIN-INSERT” (minimum inseron) mark (A) on the stem must be
below the top of the locknut (B).
NOTE: Remove plasc cap from the
end of the Stem (5).
1. Insert the Stem (5) into the fork
(g 03).
2. Point the stem towards the
front of the bike
3. Tighten the Stem Bolt (C)
enough to hold it in posion.
4. Align the stem with the front
re and ghten the stem bolt
(C) securely to 13 -lbs (g 03).
Fig 03
WARNING: Do not overghten the stem bolt. Overghtening the
stem bolt can cause loss of control and damage to the steering system.
NOTE: Do not overghten. Torque to 13 -lbs.
Indice
Altri manuali KaZAM Bicicletta
