Kellfri 13-WC08E Manuale utente

13-WC08E

WOOD CHIPPER

READ THIS MANUAL CAREFULLY BEFORE USING THE PRODUCT!

TRANSLATED FROM THE ORIGINAL



TABLE OF CONTENTS

Product information ......................................................................................... 

Safety Information (General) ...................................................................... 

Product Safety information ...................................................................... 

Warning labels ............................................................................................... 

Incase of emmergencies ...................................................................... 

Personal protective equipment ..................................................................... 

Surroundings ............................................................................................................. 

Before use ............................................................................................................. 

Use ............................................................................................................. 

Chipping ................................................................................................................................ 

Maintenance / Service ............................................................................................... 

Troubleshooting ............................................................................................................. 

Maintenance engine ........................................................................................... 

Check, clean and replace spark plugs ................................................... 

Knife: Replacing Oil/Grinding ........................................................................... 

Transport and storage .......................................................................................... 

Tightening torque metric bolts ....................................................................... 

Installation instructions ..........................................................................................  - 

Exploded diagram .............................................................................................................  - 

Complaint form .......................................................................................... 

Warranty terms and EC declaration of conformity ................................ 



INTRODUCTION

Thank you for choosing a product from Kellfri AB. By following general safety information,

operating instructions and common sense, you will have many years of enjoyable use of the

product. Kellfris equipment and products are aimed to be use by active farmers with high

demands on functionality.

PRODUCT INFORMATION

Kellfris petrol driven wood chipper 13-WC08 for wood dimensions up to 8.5 cm. The rotor has

2 knives that are 30 cm long.

The wood chipper has automatic input and output with centrifugal force. The angle and posi-

tion of the blades make the branch automatically pulled into the rotor and ejected from the

machine with centrifugal force.

INTENDED USE

Only for chipping branches and rice up to 8.5 cm. Split wood waste, small wood, twigs and

branches and use as fuel for burning, covering garden land, foundation for exercise trails,

compost, etc.

TECHNICAL DATA 13WC08E

Length 231 cm

Width 80 cm

Height 150 cm

Net Weight 180 kg

Gross Weight 221 kg

Pack Size 113x59x109 cm

Wheel 15”

Engine 15 hk 4-stroke petrol

Input for thicker branches Max 85 mm



Warning!

For safety, this product should only be used in the manner described in this manual.

The user is responsible for the instruction to be read through and followed.

SAFETY INFORMATION

Before using the equipment, for your and others safety, read the instruction manual and

understand its contents. Always keep the instruction manual handy for the user of the tool.

Remember that it can be good for your own and others safety to read the safety information

occasionally. It is important that the user understands that common sense and universal pre-

cautions are not built into the product, but must be supplied by the user. If the instruction

manual is damaged or otherwise becomes unusable, new order can be ordered from:

Kellfri AB, Munkatorpsgatan 6, 532 37 SKARA. Tel: 0511-242 50

The general safety instructions can be downloaded from Kellfris website: www.kellfri.co.uk

Do not use the equipment or product if you feel sick, tired or under the inuence of alcohol.

Nor if you are under the inuence of strong medications or drugs, suering from great de-

pression or severe mental illness. Always follow the general trac regulations and rules in the

Animal Welfare Act. Persons under the age of 15 are not allowed to use the equipment.

DANGER!

CAUTION!

NOTE!

Warning symbols identify important safety aspects in this manual to help you and others to avoid hazards and

accidents. When using the machine: Be extremely careful!

Warning!

This symbol indicates that a serious accident will occur if the instructions in the manual are not followed.

The accident resulting in serious injury, possibly death or serious property damage.

This symbol indicates that an accident will occur if instructions in the manual are not followed.

The accident resulting in serious injury or property damage.

This symbol indicates that an accident will occur if instructions in the manual are not followed. The

accident resulting in serious injury or property damage.

NOTE! indicates the potential for failure of the regulations are not followed.



PRODUCT SAFETY INFORMATION

• Exhaust fumes contain poisonous substances, so use the machine in bad ventilated

areas. Not for indoor use. Always ll up the machine with gasoline outdoors.

• Risk of burns when exposed to hot surfaces such as the exhaust system.

• Run the new machine at low speed the rst 20 hours, not high speed or full work load.

• Avoid getting petrol / oil on the skin. If this happens, rinse thoroughly with water.

• Avoid inhaling gasoline fumes while refueling.

• Do not have fuel or other explosive substances near when using the machine.

• Refueling is not permitted when the engine is running.

• NEVER have any body part in the machine while it is running. Switch o the machine

and check that the rotor has stopped spinning before taking any action on the machine.

• Never leave the machine with the engine running. Switch o the engine when leaving

the machine - even for a short while.

• Only you are that are using the machine may be in the surrounding area during work.

Respect the machines danger zone m.

• Do not use the wood chipper without all guards are correctly tted.

• Do not use the engine in a closed space, the exhaust gases contain carbon monoxide

which is fatal and dangerous if inhaled.

• Clean work area from harmful objects such as large stones, branches, etc. before work

begins.

• Do not run the machine if excessive vibration occurs, stop the machine immediately and

check what is wrong. Read maintenance and service section.

• Do not change the engine settings unless it is told by the engine manufacturer.

• Never allow anyone to ride on the machine!

• NEVER try to remove things that stuck in the wood chipper while it is running!

Make sure that the machines rotor has stopped spinning before any action is taken.

• The machine may only lift on intended lifting points. Use only suitable lifting equipment

with sucient lifting capacity to lift the machine.

• The machine must always be placed on a at surface during use.

DANGER!

The machine’s original design must not under any circumstances be changed without the per-

mission of the manufacturer. Unauthorized modications and / or accessories can result in life-

threatening or fatal injury to the operator or others.

READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE MACHINE!

LEARN AND REMEMBER THE CORRECT USE AND SHUTDOWN OF THE MACHINE

WARNING! The machine may be hazardous when used the wrong way. Therefore,

the user of the machine needs sucient knowledge of how the machine is operat-

ing and functioning! The machine must not be used by persons under  years of

age.



WARNING LABELS

Make sure that the warning labels are always visible, clean the warning labels if necessary. Do

not wash with high pressure washer directly on the warning label. If any part of the decal is

worn or label becomes frayed or otherwise unreadable, order new decals.

Use protective equipment!

Warning Rotating parts!

Warning for risk of pinching!

Read the instruction manual before use!

Warning for risk of

pinching!

Warning for ejection!

Risk zone m

Warning Rotating parts!

Noise level

Use hearing protection!



INCASE OF EMERGENCIES

In case of an emergency please dial 999.

Keep cell phone or emergency phone available specially when working alone. First aid kit and

re extinguishers must be kept easily accesable during all work, maintenance and service.

In case of emergency, press the emergency stop: the red button next to the engine.

PERSONAL PROTECTIVE EQUIPMENT

Wear suitable clothing and footwear. Do not wear loose clothing or jewelry when working

with the equipment. Remember to put up long hair when working with equipment that ro-

tates. Wear protective gloves, risk of burns when exposed to hot surfaces such as exhaust sys-

tem, as well as to avoid oil and gasoline on the skin. Hearing protection should be used when

the engine is running.The use of the chipper may result in foreign objects thrown into the eyes

that can lead to serious damage. Always wear safety goggles while using a machine.

SURROUNDINGS

Check and make sure that the area is clear of people, children and objects before switching

on or using the equipment. Risk of serious personal injury. Be especially careful if children are

in the area where the equipment is being use or stored. Check that there are no low-hanging

power lines within the work area. Be careful when working on slopes and near ditches. Always

work alone with equipment designed for work by just yourself. Never have junk/debris lying

in your work area. Have workspaces clean. Always respect the danger zone.

DANGER! Children in the area should be supervised!

Risk of child accident.



BEFORE USE

Read the safety information and operating instructions carefully. Be sure that you understand

the safety information, operating instructions and warning labels. Use common sense when

using the machine and use appropriate personal protective equipment.

Always check the performance and the machine combination that are use. It’s highly impor-

tant these matches in a satisfactory manner. This is to ensure the product or the function and

most important yours and others safety.

Visually inspect the equipment or product before using it. Fix or replace damaged or worn

parts immediately to reduce the risk of injury. Lubricate moving parts and check that all nuts

and bolts are tightened.

Learn and remember correct working method. Beginners should keep a low speed until the

person has learned how the machine works. The user / customer is responsible to handle the

situation correctly. Do not use the machine if it is experienced to be dangerous for the user.

CAUTION! Before using the machine for the rst time, check the engine speed by

moving the throttle in / out to min / max mode.

• Fill with engine oil and check the oil level.

• Fill the gasoline. NOTE! Use clean gasoline, not mixed 2-stroke fuel.

• Never use the machine without the safety devices are properly installed.

• Make sure that spectators are outside the danger zone. Do not aim the machine towards

people in the surroundings.

• Check all the bolts are tightened before use!

• Make sure the machine is on solid and at surfaces and can not tip.

• CAUTION! Check that the emergency stop works before driving. Switch on the engine

and press the emergency stop - the machine must be turned o. Do not use the machine

if the emergency stop does not work. Correct the problem before using the machine.

CAUTION! After one hour of use, check the attachment bolts to the blades and the

distance between the cutting knives and the static knife - the distance should be

between 1 - 1,5 mm, adjust the static knife when needed and tighten all bolts.



USE

Only people who understand the safety information and instructions in this manual may op-

erate the equipment. Be alert and careful when working with the machine and only use the

tool or product in the manner described in this manual. When working with equipment that

has moving parts, there is always the risk of injury. Be careful when working with equipment

equipped with hydraulic hoses, oil under pressure can penetrate the skin. Seek medical

attention immediately if this occurs. Always work alone with the tools that are dened as

single purpose tools. Respect the equipment’s danger zone.

• Make sure the work area is illuminated, the machine must not operate in poor visibility

conditions

• If large vibrations occur during operation, turn o the machine immediately and check

the machine! Make sure the moving parts of the machine have stopped before perform-

ing anything on the machine. Correct the error before reusing the machine.

• NEVER allow children or inexperienced person using the equipment!

• NEVER allow anyone to ride on the machine during transport!

• If any item gets stuck in the machine, stop the machine immediately, wait a minute to

ensure that the chipper has stopped spinning and make sure there is no cutting risk.

• Place the machine on a at surface.

• The machine’s noise level exceeds 90dB, therefore hearing protection should be used

when using the machine.

• After one hour of driving for the rst time, all bolts must be checked and retracted.

• The machine is designed for working alone, no one may be nearby using the machine.

Warning!

For safety, this product should only be used in the manner described in this manual. The user

is responsible for the instruction to be read through and followed.

STARTING THE MACHINE

1. Turn the key to“ON”

2. Open the choke and fuel valve.

CHOCK

ON/OFF

3. Pull the starter handle slowly until the gear enters, then make a quick pull on the handle.

Do not pull out the starter cord completely and do not let go of the handle when the cord is

pulled, this might tangle the cord. Repeat this step until the engine starts.

4. Heat the engine for about 3 mins before driving, then set the throttle to the max. position.



TURNING OFF THE MACHINE CORRECTLY:

1. Set the throttle at the lowest speed.

. Set the ignition switch to OFF.

. Turn the fuel valve to OFF.

CHIPPING

• Get familiar with the chipper without starting it.

• It is important that the chipper is stable during the work.

• It is important to always keep a safe distance from the place where the chips are thrown

out. Align the chute so that the chips that are thrown out and doesn’t constitutes a risk to

the operator or anyone else.

• Start the chipper carefully, wait until it has reached the right operating speed before in-

serting anything into the infeed chute.

• Never put any part of your body into the hopper or into any other part of the chipper

while the machine is running.

• Before putting the material to be chipped, make sure that the wood is free from metal,

soil, nails, stones, etc.

• When manually input the material, never work directly in front of the infeed hopper.

• Make sure no one has hands or arms near the chippers moving parts.

• Then start processing the branches towards the wood chipper then release the branch-

es from you as soon as you feel the machine chew in the branch.

If something gets stuck inside the hopper / machine: Turn o the machine immediately,

wait a few minutes before opening the protective cover to ensure that the chopping disc has

stopped spinning. Warning! Measures must only be taken when the machine is turned o!

Open the cover if necessary, use a ratchet to rotate the rotor and remove the jammed piece,

use a stick if necessary. Do not use your hand if you must push out things that are stuck in the

house or in the funnel, great risk of cutting injury!

MAINTENANCE AND SERVICE

Indice

Altri manuali Kellfri Cippatrice

Kellfri

Kellfri 13-WC17H2 Manuale utente

Manuali Cippatrice popolari di altre marche

Craftsman

Craftsman 79964 Manuale utente

Frontier

Frontier WC1208 Manuale utente

Viking

Viking GE 150 Manuale utente

Victory

Victory WC-8H Manuale utente

GTM Professional

GTM Professional GTS 1300 Manuale utente

Yardbeast

Yardbeast YB3514 Manuale utente

Patriot

Patriot Electric Motors Manuale utente

Echo

Echo CH5540 Manuale utente

DOSKO

DOSKO 13-21T-13H Manuale utente

Craftsman

Craftsman 486.24516 Manuale utente

Garland

Garland 1480 TQG Manuale utente

Vermeer

Vermeer BC160XL Guida rapida

Value Leader

Value Leader z9400 Guida

Timberwolf

Timberwolf TW 230HB Manuale utente

Salsco

Salsco 600PTO Manuale del prodotto

Cub Cadet

Cub Cadet 24A-424M710 Manuale utente

Champion

Champion 91050 Manuale

Timberwolf

Timberwolf TW 18/100G Manuale utente