Kelvix FX3D Manuale utente
090822JH
1/2 | 800.789.3810 | [email protected]
FX3D
Angled Mounting Clip Installs
SAFETY PRECAUTIONS
Remove from power
source immediately if any
damage is found in the
LED strip or cabling.
Product is NOT to be
modied in the eld.
Modications will void ETL
listing and warranty.
The rst 2.36" (60mm) of
the cable should maintain
its natural state before any
bending occurs.
Ensure all electrical
connections are insulated
and secure before
applying power.
Do not bend product
smaller than bending
diameter: 9.40" (300mm).
9.40"
Connect power feed to
appropriate power source
or controls.
Do not power up while
coiled for over 30
minutes. This may lead to
overheating and damage.
The use of third-party
accessories must be
pre-approved by Kelvix.
Failure to do so will void
manufacturer warranty.
2.36"
090822JH
2/2 | 800.789.3810 | [email protected]
FX3D
Angled Mounting Clip Installs
1 2
3 4
Altri manuali Kelvix Attrezzatura di illuminazione
