Kenik KG-900X10 Manuale utente
Intelligent Mini PTZ Camera
Manual
1
1
※Read the manual before you use the PTZ Camera
2
Index
Chapter 1 Product Profile....................................................................................1
1.1 Specification（Standard Configuration）.................................................................1
1.2 Description................................................................................................................2
1.2.2 Target Tracking..............................................................................................2
1.2.3 focal length / speed automatic matching technology.......................................2
1.2.4 Automatic flip ( slightly different in different model).....................................2
1.2.5 Set and call preset...........................................................................................2
1.2.6 Lens Control...................................................................................................3
1.2.7 Iris control......................................................................................................3
1.2.8 Auto BLC.......................................................................................................3
1.2.9 Auto WB (Automatic white balance)..............................................................4
1.2.10 Night vision function (B/W conversion).......................................................4
1.2.11 Automatic cruise...........................................................................................4
1.2.12 continuous scanning......................................................................................4
1.2.13 Zone scanning...............................................................................................5
1.2.14 Intermittent scanning....................................................................................5
Chapter 2 System OSD Menu Setting..................................................................................5
2.1 POST (power-on self-test).........................................................................................5
2.2 Preset point’s set and call..........................................................................................6
2.2.1 set preset point................................................................................................6
2.2 Preset point’s set and call..........................................................................................6
2.2.1 set preset point................................................................................................6
2.2.2 CALL PRESET..............................................................................................6
2.3 PRESET MENU........................................................................................................7
2.4 <OSD Main Menu>...................................................................................................7
2.5 <POWER UP> Electric action set.............................................................................8
2.6 <PARK ACTION> Setting Park Action....................................................................9
2.7 <SET LEFT LIMIT> Setting left limit position.........................................................9
2.8 <SET RIGHT LIMIT>Setting right limit position...................................................10
2.9 <CAMERA>Menu of camera..................................................................................10
Chapter 3 Troubleshooting and Maintenance.......................................................................10
3.1 Troubleshooting Table.............................................................................................10
3.2 After-sale service.....................................................................................................12
3
Chapter 1 Product Profile
1.1 Specification（Standard Configuration）
Model Mini High Speed Dome Camera
Power Supply DC 12V
IR Distance 30M
Optical Zoom 10X
Image Source CMOS / CCD
Signal System PAL / NTSC
Resolution 480TVL / 540TVL / 650TVL / 700TVL / 1000TVL
Focus Auto/Manual ，Adopt high performance DSP to realize all-digital
ultra high continuous focus
Preset Points 64 points
Cruise 64 preset points can take part in the cruise, residence time is settable
Other Scanning Support horizontal scanning, A-B scanning
Rotate Range Horizontal 360º unlimited，Vertical90°(or 180°Auto Rotate )
Rotate Speed Medium Speed: (Min) 0.01°/s～(Max) 50°/s，
High Speed：(Min)0.01°/s～(Max) 200°/s
Communication PELCO-D/PELCO-P，2400/4800/9600 Automatic Recognition
OSD Menu English
Temperature
Control System Optional
Diameter of
Shelter 4” Optical Glass Shelter
Material Metal
Working
Temperature/
Humidity
-20℃ ～ +50℃ （ Optional temperature control module ） ， ＜
95%RH
4
1.2 Description
1.2.1 Set the address code, baud rate, control protocol
Before using the machine, User should set the address code, 1 to 255 optional;
Modify the address encoded by the menu (Restart the machine then it will enter
into force); This machine automatically identify PELCO -D / P and other
control protocols, automatic identify 2400,4800,9600 baud rate.
1.2.2 Target Tracking
Users can control the camera to track moving targets or moving horizon by a
joystick control up and down ,right and left on the keyboard .And can change
the size of perspective and target image by adjusting the focal length . In the
auto-focus state, with the rotation of the lens, the camera will automatically
adjust according to the scene , make rapid changes instantly get a clear picture
1.2.3 focal length / speed automatic matching technology
For long focal length in manual adjustment, a reflection of the high-speed
camera might touch joystick slightly, makes the picture move quickly, resulting
in data loss. User-friendly design, intelligent ball focal distance horizontal and
vertical camera to automatically adjust the speed according to the manual
operation more simple and easy to track the target
1.2.4 Automatic flip ( slightly different in different model)
The operator pull the lens to the bottom, If you are still holding the joystick, t the camera
will rotate 180 ° automatically, then level up and flip 90 ° , so the back of the scene can be
seen directly, and achieve the full vertical 180 ° continuous monitoring.
1.2.5 Set and call preset
Preset function is the function that camera can store the horizontal angle ,tilt
angle and position of the camera focal length and other parameters in memory,
5
you can quickly call these PTZ and camera parameters and adjusted to the
position when needed. The operator can quickly and easily through the control
keypad, IR controller and other control equipment and call the preset point, the
camera supports 64 presets
1.2.6 Lens Control
A. Focal Control
Users can adjust the focal length and the distance by keyboard or host matrix to
obtain the desired panoramic picture, or subtle view
B. Focus Control
In default auto-focus, zooming, the camera will auto-focus to the center of the
scene and keep image clean. ; Users can manually focus in exceptional
circumstances, to achieve the desired image effect, when in manual focus, , just
shake the joystick to resume auto-focus , then it will restore to auto focus.
Camera lens can not autofocus in the following cases:
a. target is not the center of the screen
b. goals while in the far and near places
c. targets are light objects, such as neon, spotlights and other luminous objects
d. target is in the vicinity of water droplets or behind the glass with dust
e. targets moving too fast
f. large area targets, such as walls
g. goal is too dark or fuzzy
1.2.7 Iris control
Users can control the keyboard, adjust the Iris size manually, get the screen
brightness
1.2.8 Auto BLC
6
When the backlight compensation function to be opened, the camera can be
brightness compensation to a dark target automatically under the strong light
background. Adjust the bright light background to avoid the entire scene a
cloud of light caused by brightness background and the dark target to make
invisible, so as to get a clear image
1.2.9 Auto WB (Automatic white balance)
According to the variation of environmental light, automatic adjust and
reappear the true color.
1.2.10 Night vision function (B/W conversion)
With night vision camera, according to the variation of environmental light will
convert CMOS illumination automatically in B/W conversion automatic mode.
Such as: during the day because the light is enough, use general illumination to
guarantee colorful picture. And can change to low illumination in the night
automatically. with black and white images showed clear image.
1.2.11 Automatic cruise
Through controlling the preset point with cruise. And put some preset point to
a sequence according to the requirement to automatic cruise queue, only an
external command can let the high speed dome camera move automatically
according to presetting point at in specific time..
1.2.12 continuous scanning
Only need an external command or by electrify action, idle action, action with alarm,
it can make the high speed dome camera horizontally in a clockwise direction to loop
scanning continuously at a certain speed
7
1.2.13 Zone scanning
Only need an external command or by electrify action, idle action, action with alarm,
it can make the high speed dome camera horizontally scan back and forth within a set range
at a certain speed, it can be set in the menu
1.2.14 Intermittent scanning
Only need an external command or by electrify action, idle action, action with alarm,
it can make the high speed dome camera horizontally intermittent scan back and forth at a
certain speed
Chapter 2 System OSD Menu Setting
2.1 POST (power-on self-test)
After the high speed dome camera power on and motion at horizontal and vertical
direction, Screen will appear system-related information, after this information disappear, the
high speed dome camera self-test finish. High speed dome camera information as the flowing
picture:
SERIAL: 14001234
PTOTOCOL: AUTO
BAUD RATE: AUTO
ADDRESS : 001
CAMERA: MT10C
SOFTWARE VER: 1.0
Display: protocol automatically, baud rate automatically, address code 1
Note: For different setting of high speed dome camera, the contents after power-on is
different
Chapter 2 System OSD Menu Setting
2.1 POST (power-on self-test)
After the high speed dome camera power on and motion at horizontal and vertical direction,
Screen will appear system-related information, after this information disappear, the high
speed dome camera self-test finish. High speed dome camera information as the flowing
picture:
8
SERIAL: 14001234
PTOTOCOL: AUTO
BAUD RATE: AUTO
ADDRESS : 001
CAMERA: MT10C
SOFTWARE VER: 1.0
Display: protocol automatically, baud rate automatically, address code 1
Note: For different setting of high speed dome camera, the contents after power-on is
different
2.2 Preset point’s set and call
2.2.1 set preset point
By controlling the keyboard, hard disk video recorders and other control equipment to make
the high speed dome camera rotate to the corresponding position, After using zoom key to
adjust the multiple of lens to the suitable angle, you can set the preset point, and input the
corresponding preset number
2.2 Preset point’s set and call
2.2.1 set preset point
By controlling the keyboard, hard disk video recorders and other control equipment to
make the high speed dome camera rotate to the corresponding position, After using zoom key
to adjust the multiple of lens to the suitable angle, you can set the preset point, and input the
corresponding preset number
E.g.: Using the Keyboard to set the Preset 1
a. Turn the PTZ to the desired position, and zoom lens to a desired angle
b. Enter “1” of the Keyboard
c. Enter “PRESET” of the Keyboard
2.2.2 CALL PRESET
9
Call the Preset by controlling the keyboard, DVR or other control equipment, according
to the needs of the number to call and view the set Preset Position.
E.g.: Using the Keyboard to call the Preset 1
A. Enter “1” of the Keyboard
B. Enter “Call” of the Keyboard
2.3 PRESET MENU
Call Preset 95 Start Menu
Set Preset 95 Enter/Exit the Mechanism Menu
Call Preset 82 Automatic cruise
Call Preset 83 Delete all Presets
Set Preset 70 Set left limit Area Scanning
Set Preset 71 Set right limit Area Scanning
Call Preset 94 Clear all Area Scanning
Call Preset 96 360°Batch Scanning
Call Preset 97 Area Scanning
Call Preset 98 Preset Cruising
Call Preset 99 360°Continuous Scanning
Table 2-1Menu
2.4 <OSD Main Menu>
PTZ powered on, after the completion of the self-test, call Preset 95 to enter the main menu,
screen display as Table 2-2.
(Noted: IR MODE,IR ON SENS,IR OFF SENS is the specific feature of IR PTZ, Non-
infrared invalid)
10
Indice
