Kenwood DV-605 Manuale utente

70%

MULTIPLE DVD/VCD/CD PLAYER

DV-605/DVF-R5060-S

SERVICE MANUAL

B51-5802-00 (K/K) 1402

In compliance with Federal Regulations, following are repro-

duction of labels on, or inside the product relating to laser

product safety.

KENWOOD Corp. certifies this equipment conforms to DHHS

Regulations No.21 CFR 1040. 10, Chapter 1, subchapter J.

DANGER : Laser radiation when open and interlock defeated.

AVOID DIRECT EXPOSURE TO BEAM.

Caution : No connection of ground line if disassemble

the unit. Please connect the ground line on

rear panel, PCBs, Chassis and some others.

POWER

ON OFF

4¢

DISC SKIP

SEQUENCE

MODE

DISC 1 DISC 2 DISC 3 DISC 4 DISC 5

AUDIO

OUTPUT

VIDEO

OUTPUT

S-VIDEO

OPTICALCOAXIAL

COMPONENT

VIDEO OUTPUT

Cabinet panel *

(A60-)

Crystal Window *

(B10-)

DIN socket

(E68-0018-08)

Top cover *

(A01-)

Button *

(K29-)

Button *

(K27-)

Knob(POWER) *

(K27-)

Phono socket

(E63-1244-08)

AC power cord bushing

(J42-0350-08)

AC power cord

(E30-7250-08)

Phono socket

(E63-1227-08)

Oscillating module

(GP1F32T)

Phono socket

(E63-1192-08)

*Refer to parts list on page 19.

Batteries(R6/AA) ...(2)

Please confirm that the following accessories are present.

Audio video cord (Red, White, Yellow) ...(1)

(E30-2990-08)

Remote control unit ...(1)

(A70-1570-08)

Coaxial cable ...(1)

(E30-7235-08)

DV-605/DVF-R5060-S

CONTENTS / ACCESSORIES / CAUTIONS

CONTENTS / ACCESSORIES / CAUTIONS............. 2

DISASSEMBLY FOR REPAIR....................................3

BLOCK DIAGRAM ......................................................4

ADJUSTMENT ............................................................4

PC BOARD ................................................................ 5

SCHEMATIC DIAGRAM .......................................... 11

EXPLODED VIEW ....................................................17

PARTS LIST..............................................................19

SPECIFICATIONS ......................................Back cover

Contents

Accessories

Cautions

The marking of products using lasers

(For countries other than U.S.A., U.S.-Military and Canada)

The marking this product has been classified as Class 1. It

means that there is no danger of hazardous radiation outside

the product.

Location: Back panel

CLASS 1

LASER PRODUCT

Operation to reset

÷Please note that resetting the microprocessor clears the

contents stored in, it returns the microprocessor to the con-

dition when it left the factory.

1In Power ON condition, keep the DISC 3 key and the 4

(Skip) key pressed at the same time.

2When both keys are pressed, the region code of the unit,

the software version, etc. will be displayed on the dis-

play. (When nothing is done, the display of this informa-

tion continues.) Example: 72. 14.02:05

3Press the DISC 4 key and the 44

4key at the same time.

"BYE" will be shown on the display.

4Press the POWER ON/OFF switch to go to Power OFF.

5When Power ON is performed with the POWER ON/OFF

switch, the settings become the default factory settings.

The microprocessor may fall into malfunction (impos-

sibility to operate erroneous display, etc.) when the

power cord is unplugged while power is ON or due to

an external factor. In this case, execute the following

procedure to reset the microprocessor and return it to

normal condition.

DV-605/DVF-R5060-S

DISASSEMBLY FOR REPAIR

1. How to open the tray if it does not come out.

(Fig.1)

1. Remove the plastic plate.

2. Turn the gear fully CCW using a flat driver and so on in the

drawing through the hole on the loading chassis bottom.

3. Pull out the tray frontward by hand when it comes just out.

2. How to remove the DVD mechanism. (Fig.2)

1. Remove connectors (1~3and power switch lever.

2. To separate the DVD mechanism, remove screws (4x4

and pull it out backward.

PLASTIC

PLATE

POWER

SWITCH

LEVER

Fig. 1

Fig. 2

+5VS

FL AC

-27V

ADDR+

F-WE

F-DE

F-RESET

ADDR+

D-RAS0-

RDNOTWR

DATA+

D-CAS0-

D-CAS1-

F-CE

F-OE(DRAM OE)

+5V6S

TXD

RXD

RESET MAIN

IRQ2

+3V3-RESET

EXIT-DATA

EXIT-BCLK

EXIT-DATAVA LID

EXT-PSTART/ERROR

F/E SDATA

+9V MOTOR VCC

+3.3V DIGITAL VCC

+5V DIGITAL VCC

F/E SCL

PCM-DATA

DAC LATI25

DAC SCKDSD

DAC SDIDEM

DAC MUTEB

CSBWL

PCM MCLK

PCM LRC

PCMCLK

AUDIO MUTE

CVBS-OUT

Y-OUT

C-OUT

I (Y)-OUT

P (Cr)-OUT

P (Cb)-OUT

P (Y)-OUTP SCAN CLK

P SCAN DATA

P SCAN STB

VIA2-VIA8

GND

SPDIF

VIDEO MUTE

PIXCLK-27MHZ

SDA SCL

L AUDIO

R AUDIO

F-OE(DRAM OE)

DAC ZERO

DATA+

AC CORD

+9V ANALOG VCC

-9V ANALOG VCC

+5V DIGITAL VCC

+3.3V DIGITAL VCC

+9V MOTOR VCC

5V FRONT

IC91 FL

M29F400T-90N1

8MBIT

FLASH MEMORY

IC41

HY57V651610BLTC-8

SDRAM-64MBIT

IC31

125MHz

IC21

MPEG

STI5519

IC61

DAC

WM8728

L.P.F

BA4560

MUTE

JK82

Lch

Rch

MIXED

IC11

PM0026

PROGRASSIVE

I/P

TR DRIVER FOR

75 ohm x2

IC12

PROGRASSIVE

6CH/6dB/FOR

MM1568

DVD

SWITCHING

CVBS-VIDEO

JK83A

JK83B

S-VIDEO

JK84

RCA 3V

JK87

ON/OFF

P SCAN

BUFFER COAXIAL

JK81

OPTICAL

IC85

IC51

74HCU04

HEX INVERTER

IC22

EEPROM

M24C02

Q61R

Q61L

SMPS

TVM MECHA

F/E & MECHA

DV-605

DV-605/DVF-R5060-S

BLOCK DIAGRAM

ADJUSTMENT

No. ITEM INPUT SETTING OUTPUT SETTING ALIGNMENT

POINT

ALIGNMENT

FOR FIG.

Progressive

Y LEVEL

100% COLOR

BAR DISC

Connect the oscilloscope to

Y output(JK84) with 75-ohms resistor.

Output Mode: Progressive

VR11 Y-signal=

1000mV±100mV FIG.1

1000mV

±100mV

4.7µs

-286

714

(100IRE)

[mV] white

yellow

cyan

green

magenta

red

blue

black

714

641

516

443

324

252

127

Fig. 1

Adjustment Method & Precautions

1. Play Back 100% White Pattern

2. Channel 2 : OSC Probe, Composite(JK83-A)

3. Channel 1 : OSC Probe, Y(JK84) output

Channel 2 : Trigger

4. OSC Time / Div Control

5. VR11Variable : See the Scope Wave

DV-605/DVF-R5060-S

CIRCUIT DESCRIPTION

Pin No. Pin Name I/O Pin Description

PIOs and communication

1 PIO2(5) DAC SDIDEM IN/OUT I/O DAC data input and output.

2 PIO2(6) DAC MUTEB IN/OUT I/O DAC mute control.

3 PIO2(7) DAC CSBIWL OUT O DAC chip select.

6 PIO3(0) PRO SCAN ON/OFF I P. Scan switch input.

7 PIO3(1) I/O Unused.

8 PIO3(2) O PROG-H

9 PIO3(3) O PM0026A (IC11) Clock

10 PIO3(4) IR REMOCON I/O IR Remote controller signal output (Unused).

11 PIO3(5) O PM0026A (IC11) data

12 PIO3(6) O PM0026A (IC11) STB

13 PIO3(7) DVD RESET I/O Power- on reset of front-end module.

Front-end

16 B DATA I I2S Data

17 B BCLK I I2S Bit clock

18 B FLAG I I2S Error flag

19 B SYNC I/O I2S Sector / ABS time

Reserved

20 B WCLK I/O Unused.

21 B V4 I/O Unused.

22 NRSS OUT I/O Unused.

23 VDD RGB - Supply voltage for RGB (+2.5VA).

24 VSS RGB - GND

Video DAC

25,26,27 B/G/R (OUT) O B/G/R signal outputs.

28 V REF RGB I Reference voltage input for DAC RGB.

29 I REF RGB I Reference current input for DAC RGB.

30 VDD YCC - Supply voltage for YCC (+2.5VA).

31 VSS YCC - GND

32~34 Y/C/CV (OUT) O Y/C/CV signal outputs.

35 V REF YCC I Reference voltage input for DAC YCC.

36 I REF YCC I Reference current input for DAC YCC.

PIOs and communication

39~46 PI04(0~7) I/O YC(0~7)

Audio DAC

48 VDD PCM - Supply voltage for PCM (+2V5).

49 VSS PCM - Ground for PCM.

51 DAC SCLK (BCK) O DAC over sampling clock.

52 DAC PCMOUT0 DATA O DAC PCM data out 0.

53 DAC PCMOUT1 O DAC PCM out 1 (unused).

54 DAC PCMOUT2 O DAC PCM out 2 (unused).

55 DAC PCMCLK O DAC PCM clock.

56 DAC LRCLK O DAC PCM Left/Right clock.

57 SPDIF OUT O Audio digital data output.

Shared memory interface

66~69 SMI ADR(3~0) O SDRAM address bus.

58~63 SMI ADR(4~9) O SDRAM address bus.

70~73 SMI ADR(10~13) O SDAM address bus.

74 SMI CS(0) O Chip select bank 0.

75 SMI CS(1) - Unused.

76 SMI RAS O SDRAM RAS

77 SMI CAS O SDRAM CAS

78 SMI WE O SDRAM write enable.

79 SMI DQML O DQ MASK enable low.

1. Pin Description of MPEG Processor (Main, IC21)

DV-605/DVF-R5060-S

CIRCUIT DESCRIPTION

Pin No. Pin Name I/O Pin Description

80 SMI DQMU O DQ MASK enable up.

82 SMI CLKIN I SDRAM clock input.

84~93 SMI DATA(0~9) I/O SDRAM data bus.

95 SMI CLKOUT O SDRAM clock out.

97~102 SDI DATA(10~15) I/O SDRAM data bus.

Reserved

103 ADC SCLK I/O Digital audio port clock (Unused).

104 ADC LRCLK I/O ADC sample rate clock (Unused).

105 ADC DATA I ADC digital audio data input (Unused).

106 ADC PCMCLK O Crystal input or master clock input (Unused).

JTAG

109 TRST I Test reset from emulator module.

110 TMS I Test mode select.

111 TDO O Test data out to emulator module.

112 TDI I Test data input from emulator module.

113 TCK I Test clock input from emulator module.

Timers

114 PWM2 I/O Unused.

115 PWM1 I/O ROM boot option port (voltage low = emulator booting).

116 PWM0 I/O Unused.

EMI Interface

117 CPU OE I/O Flash ROM output enable.

118 CPU PRO CLK O SDRAM clock (unused).

Clock & Reset

120 PIX CLK I 27MHz main clock input.

122 VDD PLL - Supply voltage for PLL (+2V5).

123 VSS PLL - Ground for PLL.

124 RESET I Chip reset input.

Interrupt

125 IRQ(2) I Interrupt request 2 from front-end module.

126 IRQ(1) I Unused.

127 IRQ(0) I Unused.

EMI Interface

128 CPU BE(0) O BYTE0 Enable

129 CPU BE(1) O BYTE1 Enable

130 CPU RW O Unused.

131 CPU WAIT I Wait state (connected to ground)

132 CPU CE(3) O Chip select bank 3

133 CPU CE(2) O Chip select bank 2

134 CPU CE(1) O Unused.

135 CPU CE(0) O Unused.

138 CPU RAS1 I/O Unused.

139 CPU CAS0 O Unused.

140 CPU CAS1 O Unused.

141~148 CPU DATA(0~7) I/O Flash ROM data input/output (0~7).

151~158 CPU DATA(8~15) I/O Flash ROM data input/output (8~15).

161~170 CPU ADR(1~10) O Flash ROM address (1~10).

173~183 CPU ADR(11~21) O Flash ROM address (11~21).

PIOs and communication

186 PIO0(0) T STROBE I/O UART0 Data

187 PIO0(1) MOD SW I/O ATAPI RD

188 PIO0(2) VFD STB O VFD strobe output.

189 PIO0(3) VFD CLK O VFD clock output.

190 PIO0(4) VFD DATA OUT O VFD data output.

191 PIO0(5) VFD DATA IN I Data input from VFD.

DV-605/DVF-R5060-S

CIRCUIT DESCRIPTION

Pin No. Pin Name I/O Pin Description

192 PIO0(6) SLIDER SENSOR I/O Detection port of slider sensor for DVD mechanism.

OPEN/CLOSE (DRAWER POSITION )

193 PIO0(7) SLIDER IN I/O Control port of slider (IN) for DVD mechanism.

(DRAWER CCW/CTRL)

194 PIO1(0) SDA I/O SSCO Data (MTSR out / MRST in)

195 PIO1(1) SCL I/O SSCO Clock

196 PIO1(2) SLIDER OUT I/O Control port of slider (OUT) for DVD mechanism.

(DRAWER CW CTRL)

197 PIO1(3) TXD(JIG) I/O UART2 TXD

200 PIO1(4) RXD(JIG) I/O UART2 RXD

201 PIO1(5) FRONT TXDI I/O UART1 TXD

202 TRIGGER IN I/O Trigger input from JIG.

203 TRIGGER OUT I/O Trigger output from JIG.

204 PIO2(0) VIDEO MUTE I/O Video mute control.

205 PIO2(1) FRONT RXD I/O UART1 RXD

206 PIO2(2) AUDIO MUTE O Audio mute control.

207 PIO2(3) DAC LAT12S OUT O DAC latch output.

208 PIO2(4) DAC SCKDSD OUT O DAC system clock output.

Power supply

4,47,81,107 VDD3 3 - 3.3V Power supply.

136,159,184

14,37,64,94

119,149,171 VDD2 5 - 2.5V Power supply.

198

5,15,38,50,65

83,96,108,121 VSS - GND

137,150,160

172,185,199

Pin No. Pin Name I/O Description

1 VDD3 - Positive supply voltage (+3.3V) for pad ring.

2~8 VIB9~VIB3 I Connected to digital ground.

9~11 GND - Digital ground for core.

12~14 VIB2~VIB0 I Connected to digital ground.

15,16 DOS1, DOS0 I Connected to digital ground.

17~19 TEST2~TEST1 I Connected to digital ground.

20 VDD3 - Positive supply voltage (+3.3V) for pad ring.

21 VDD2 - Digital positive supply voltage (+2.5V) for core.

22 AGND - Analog ground for D/A converter.

23 DAO Y O Y analog output.

24 AVDD2 - Positive supply voltage (+2.5V) for D/A converter.

25 DAO B O Cb analog output.

26 AGND - Analog ground for D/A converter.

27 DAO R O Cr analog output.

28 AVDD2 - Positive supply voltage (+2.5V) for D/A converter.

29 VREF I Reference voltage input for 3DACs.

30 FSADJ I/O Current source for full scale adjustment of 3DACs.

31 AVDD2 - Positive supply voltage (+2.5V) for D/A converter.

32 VG O Compensation pin for gate voltage of DAC current cells.

33 AGND - Analog ground for D/A converter.

34 CLMP O Unused.

35 SPR7/V09 O Unused.

2. Pin Description of IC's

2-1 Progressive Convert DAC : PM0026A (Main, IC11)

DV-605/DVF-R5060-S

CIRCUIT DESCRIPTION

Pin No. Pin Name I/O Description

36 GND - Digital ground for core.

37~39 SPR4/V06~ OMulti-purpose parallel output converted from serial data through

SPR6/V08 MPU interface / pixel data output.

40,41 VDD3 - Positive supply voltage (+3.3V) for pad ring.

42 GND - Digital ground for core.

43~45 SPR1/V03~ OMulti-purpose parallel output converted from serial data through

SPR3/V05 MPU interface / pixel data output.

46 SPR0/V02 O Multi-purpose parallel output converted from serial data through

MPU interface (LSB) / pixel data output.

47 VO1 O Pixel data output.

48 VO0 O Pixel data output (LSB).

49 VDD3 - Positive supply voltage (+3.3V) for pad ring.

50~52 GND - Digital ground for core.

53 RMA5 I Address input for monitoring internal register (MSB).

54~56 RMA4~RMA2 I Address input for monitoring internal register.

57 GND - Digital ground for core.

58 CLK I System clock input (27MHz).

59 SRP I System reset input (negative).

60 VDD3 - Positive supply voltage (+3.3V) for pad ring.

61 VDD2 - Digital positive supply voltage (+2.5V) for core.

62 CSB I Chip select input of MPU serial interface.

63 SDATA I Data input of MPU serial interface.

64 SCLK I Clock input of MPU serial interface.

65 RMA1 I Address input for monitoring internal register.

66 RMA0 I Address input for monitoring internal register (LSB).

67 CKPOL - Internal clock. polarity control input.

68 VIA9 I Pixel port A input (MSB).

69~76 VIA8~VIA1 I Pixel port A input

77 VIA0 I Pixel port A input (LSB).

78 NVS I/O Active low vertical sync.

79 NHS I/O Active low horizontal sync.

80 VDD3 - Positive supply voltage (+3.3V) for pad ring.

Pin No. Pin Name I/O Description

1,34 VCC1,2 - VCC

2 CIN I Croma input.

3,15 MUTE (1,2) O Mute select (Unused).

4,6 VIN, YIN I Video input (Composite or Y).

5 YC MIX - YC MIX select (GND).

7 BIAS - Bias

8,10,17,20,

23,26,29,32 GND - GND

9,11 NC - Unused.

12 CYIN I Luminance input

13 CLP - Input clamp select (Unused).

14,16 CbIN, CrIN I Component input.

18 CrOUT

21 CbOUT

24 CYOUT O Signal output.

27 YOUT

30 VOUT

19 CrSAG

22 CbSAG

25 CYSAG O SAG correction.

28 YSAG

31 VSAG

33 COUT O Croma output.

2-2 Video Driver : MM1568 (Main, IC12)

DV-605/DVF-R5060-S

CIRCUIT DESCRIPTION

Pin No. Pin Name I/O Description

38 CLK I The system clock input. all other inputs are registered to the SDRAM on

the rising edge of CLK.

37 CKE - Controls internal clock signal and when deactivated, the SDRAM will be

one of the states among power down, suspend or self refresh.

19 CS - Enables or disables all inputs except CLK, CKE, and DQM.

20,21 BA0,BA1 - Selects bank to be activated during RAS activity.

Selects bank to be read/written during CAS activity.

22~26 Row address : RA0~RA11, Column address : CA0~CA7

29~35 A0~A11 - Auto-precharge flag : A10

16,17,18 WE,CAS,RAS - WE, CAS and RAS define the operation.

15,39 LDQM,UDQM I/O Controls output buffers in read mode and masks input data in write mode.

2,4,5,7,8,10,11,

13,42,44,45,47, DQ0~DQ15 I/O Multiplexed data input/output pin.

48,50,51,53

1,3,9,14,27,

43,49 VCC/VCC Q - Power supply for internal circuits and input buffers.

6,12,28,41,

46,52,54 VSS/VSS Q - Ground terminal.

36,40 NC - Unused.

2-3 64 Bit SDRAM : HY57V651620B (Main, IC31)

Pin No. Pin Name I/O Description

1~8, 16~25,48 A0~A18 I Address Inputs

29,31,33,35,

38,40,42,44 DQ0~DQ7 I/O Data Input/Outputs, Command Inputs

30,32,34,36,

39,41,43 DQ8~DQ14 I/O Data Input/Outputs

45 DQ15 I/O Data Input/Outputs or Address input

26 CE - Chip Enable

28 QE - Output Enable

11 WE - Write Enable

12 RP - Reset/Block Temporary Unprotect

15 RY/BY O Ready/Busy/Output

47 BYTE - Byte/Word Organization

37 VCC - Supply Voltage

27,46 VSS - Ground

2-4 Flash Memory : M29W800AT(Main, IC41)

Pin No. Pin Name I/O Pin Description

1,3,5,9,11,13 A0 to A5 I Data Inputs

2,4,6,8,10,12 Q0 to Q5 O Data Outputs

7 GND - Ground

14 VCC - Positive Supply Voltage

2-5 HEX Inverter (Single Stage) : M74HCU04(IC51) Truth Table

DV-605/DVF-R5060-S

CIRCUIT DESCRIPTION

Pin No. Pin Name I/O Pin Description

1 LRCIN I DAC sample rate clock input : PCM input mode

Right channel DSD bitstream input : DSD input mode

2 DIN I Serial audio data input : PCM input mode

Left channel DSD bitstream input : DSD input mode

3 BCKIN I Audio data bit clock input.

4 MCLK I Master clock input.

5 ZERO O Infinite zero detect flag.

6 DGND - Digital ground supply.

7 DVDD - Digital positive supply.

8 VOUTR O Right channel DAC output.

9 AGND - Analog ground supply.

10 AVDD - Analog positive supply.

11 VOUTL O Left channel DAC output.

12 VMID O Mid rail decoupling point.

13 VREFN - DAC negative reference.

14 VREFP - DAC positive reference.

15 CSBIWL I Software mode : 3-wire serial control chip select

Hardware mode : Input word length

16 MODE I Control mode selection.

17 MUTEB - Mute control. "L" = Mute on, "H" = Mute off

18 SDIDEM - Software mode : 3 or 2-wire serial control data input

Hardware mode : De-Emphasis select

19 SCKDSD I Software mode : 3 or 2-wire serial control clock input

Hardware mode : DSD bitstream operation select

20 LAT12S I Software mode : 3-wire serial control load input

Hardware mode : Input data format selection

2-6 24-bit, 192kHz Stereo DAC : WM8728 (Main, IC61)

Pin No. Pin Name I/O Description

1 RXD I Communication from MPEG (IC21).

2 RMC IN I Input for remote control receiving circuit.

3~7 - - Unused.

8 RESET MAIN I/O System reset.

9,10 - - Unused.

11 MODE SELECT - Unused.

12,13 - - Unused.

14~18 DISC(5~1) LED I Key return input for segment signal with performs key scanning.

19~21 NC - Unused.

22 REGION - Setting of the destination.

23,24 - - Unused.

25~27 KEY1~KEY3 I Key input port.

28,29 - - Unused.

30 RST I Reset signal input.

31 EXTAL I Connection for system clock oscillation crystal.

32 XTAL O Connection for system clock oscillation crystal.

33 VSS - GND

34~56 SEG01~SEG23 O Segment signal output for FDP.

57,58 - - Unused.

59~70 G12~G1 O Grid signal output for FDP.

71 VFDP - Power supply (-25V) for FDP.

72,73 VDD - Positive power supply(+5.0V).

74 SCART H - Unused.

75,76 - - Unused.

77 TXD O Communication to MPEG (IC21).

78,79 - - Unused.

80 - - Connected to power supply(+5V).

2-7 VFD Controller :CXP82532(IC91)

Altri manuali per DV-605

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Kenwood Lettore CD

Kenwood

Kenwood DPC-X347-S Manuale utente

Kenwood

Kenwood KD-C519FM Manuale utente

Kenwood

Kenwood KDC-C665 Manuale utente

Kenwood

Kenwood KDC-C462FM Manuale utente

Kenwood

Kenwood DPC-361 Manuale utente

Kenwood

Kenwood KMD-C80 Manuale utente

Kenwood

Kenwood DP-M7750 Manuale utente

Kenwood

Kenwood KDC-CX82 Manuale utente

Kenwood

Kenwood DP-R6070 Manuale utente

Kenwood

Kenwood KDC-C510FM Manuale utente

Kenwood

Kenwood DVF-5500 Manuale utente

Kenwood

Kenwood DP-J1070 Manuale utente

Kenwood

Kenwood DPC-542 Manuale utente

Kenwood

Kenwood DP-940 Manuale utente

Kenwood

Kenwood KDC-C604 Manuale utente

Kenwood

Kenwood DP-7010 Manuale utente

Kenwood

Kenwood DVF-3070 Manuale utente

Kenwood

Kenwood KDC-MP202 Manuale utente

Kenwood

Kenwood DPX513WBT Manuale utente

Kenwood

Kenwood CD-2260M Manuale utente

Kenwood

Kenwood DP-M4010 Manuale utente

Kenwood

Kenwood DP-7020 Manuale utente

Kenwood

Kenwood CD-3260M Manuale utente

Kenwood

Kenwood DP-R895 Manuale utente

Manuali Lettore CD popolari di altre marche

RCA

RCA RP-7923 Manuale utente

Pioneer

Pioneer DEH-P3550MP XM Manuale utente

Philips

Philips AZ1207 Manuale utente

Philips

Philips CD582 Manuale utente

Philips

Philips AZ 6821 Manuale utente

Lasonic

Lasonic MSU-2020 Manuale utente

THOMSON

THOMSON RCD150 Manuale utente

Denon

Denon DCD-1420 Manuale utente

Panasonic

Panasonic SJ-MR100 Manuale utente

Onkyo

Onkyo DX-7210 Manuale utente

Sony

Sony MZ-R3 Manuale utente

Denon

Denon DVM-4800 Manuale utente

JBL

JBL MR-32 Manuale utente

RCA

RCA RCD152 Manuale utente

Technics

Technics SL-PS770A Manuale utente

Clarion

Clarion compact disc Manuale utente

Sony

Sony MZ-M10 Manuale utente

Philips

Philips Expanium AZ 1538 Manuale utente