Key Digital KD-HDDA1x2Pro Phantom Manuale utente

HDMI®Distribution Ampliﬁers with Audio De-Embedder,

Coaxial Audio, Optical Digital Audio & Analog L/R

The Experts in Digital Video Technology and Solutions™

Phantom Series™

Operating Instructions

KD-HDDA1x2Pro KD-HDDA1x3Pro

KD-HDDA1x4Pro

Always follow the instructions provided in this Operating Manual.

Table of Contents

Introduction ................................................................ 1

Quick Setup Guide .......................................................... 2

Installation and Operation ..................................................... 3

DVI Applications for KD-HDDA Pro Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

EDID Control Settings ........................................................ 4

External Audio Outputs ....................................................... 5

RS-232 Commands and Protocol ............................................... 5

Mechanical / Technical Specications ............................................ 6

Important Product Warnings:................................................... 7

Safety Instructions: .......................................................... 7

How to Contact Key Digital

................................................... 8

Warranty Information ......................................................... 8

Introduction

Key Digital®Phantom Series™ HDMI/DVI Distribution Ampliers are designed and engineered

to offer the best in quality, performance, and reliability while providing a cost effective HDMI/

DVI distribution solution. The KD-HDDA1x2Pro; KD-HDDA1x3Pro; KD-HDDA1x4Pro HDMI

Distribution Ampliers provide single input to multiple output distribution and maintain

crystal-clear, pristine picture and sound quality. Phantom Series™ Distribution Ampliers are

a transparent solution for all digital video/audio distribution applications and support all HD

and SD video standards, including 1080p/60. KD-HDDA Pro Distribution Ampliers feature

status-monitoring LEDs and are capable of separating HDMI Audio.

About the KD-HDDA1x2Pro; KD-HDDA1x3Pro; KD-HDDA1x4Pro

›Distribution of one HDMI input to multiple (2, 3, or 4) HDMI outputs

›Supports all SD, HD, and VESA (VGA, SVGA, XGA, WXGA, SXGA, UXGA) resolutions up to

1080p (60Hz & 50Hz)

»SD & HD: 480i, 480p, 720p, 1080i, 1080p

»VESA: From 640x480p up to 1920x1200p

›EDID and HDCP Transparency between source and displays

›Can be used to strip audio from the HDMI input and send it to external digital or analog audio

outputs

›Supports signal rates up to 10.2 Gb per second

›Supports HDMI and DVI-D

›Compliant with all HDMI

versions and HDCP copyright protection

›Input and Output status indicated by LED lights

›Firmware upgradable

›Rack mountable

Advanced HDMI®Features

›3D – Capability to pass 3D stereoscopic signal formats

Accessories

›External power supply: 5V 2A

›HDMI Lacing Clips

›Rack Ears

›Operating Instructions

›Warranty Card

Quick Setup Guide

›Step 1: Find a safe and convenient location to mount or place your KD-HDDA Pro unit

›Step 2: Begin with the KD-HDDA Pro unit and all input/output devices turned off with

power cables removed

›Step 3: Connect your HDMI or DVI-D source device to the input port of your KD-HDDA Pro unit

›Step 4: Connect your HDMI or DVI-D displays to the output port of your KD-HDDA Pro unit

›Step 5: Be sure the Operation Mode Switch is set to the “Normal” position

›Step 6: Connect power to the KD-HDDA Pro unit

›Step 7: Power on input/output devices

Audio

HDMI

Audio

CAT6/STP

Audio

HDMI/DVI*

Audio

CAT6/STP

Audio

CAT6/STP

DVI Video*

HDMI

CAT6/STP

Up to 400’

with Key Digital

KD-CAT6STP1X

KD-CATHD500Pro

CAT6/STP

Up to 600’

with Key Digital

KD-CAT6STP1X

KD-CATHD500FW

CAT6/STP

Up to 600’

with Key Digital

KD-CAT6STP1X

KD-CATHD500FW

KD-HDDA1x4Pro

EDID Control

RS-232

KD-HDDA1x4Pro

EDID Control

RS-232

KD-HDDA1x4Pro

EDID Control

RS-232

Speakers

Sub-Woofer

Cable Box

Display 4

Display 3

Display 2

Display 1

Audio Rcvr.

Speakers

Sub-Woofer

Cable Box

Display 4

Display 3

Display 2

Display 1

Audio Rcvr.

Display 4

Display 3

Display 2

Display 1

DVI

DVI Video* DVI Video*

Desktop PC

Note: No signal conversion is done on the KD-HDDA1x2Pro; KD-HDDA1x3Pro; KD-HDDA1x4Pro.

If input signal is HDMI output signal will be HDMI. If input signal is DVI output signal will be DVI.

Installation and Operation

Before permanently securing the unit for nal installation of cabling behind walls or ceilings, test for

proper operation of the unit and the cables in your system.

It is recommended that you leave enough ventilation space to provide sufcient airow and

cooling, especially if you are going to leave the unit powered at all times.

An optional HDMI cable clip (included) enables a method for securing HDMI cables the HDMI

connectors on the back of the units and helps defeat intermittent or complete signal loss due to

poor connection.

Active Input / Output LED Indicators

›The front LEDs indicate that a valid HDMI / DVI-D connection is made between the KD-HDDA Pro

unit and each Input / Output.

DVI Applications for KD-HDDA Pro Series

KD-HDDA Pro Distribution Ampliers can also be used with DVI-D sources and displays. For

these applications, use DVI to HDMI (Key Digital model number KD-MFHDMI or KD-FMHDMI)

adapters. Note that while HDMI supports both video and audio over an HDMI cable, DVI-D

supports only video.

Audio

HDMI

Audio

CAT6/STP

Audio

HDMI/DVI*

Audio

CAT6/STP

Audio

CAT6/STP

DVI Video*

HDMI

CAT6/STP

Up to 400’

with Key Digital®

KD-CAT6STP1X

KD-CATHD500Pro

CAT6/STP

Up to 600’

with Key Digital®

KD-CAT6STP1X

KD-CATHD500FW

CAT6/STP

Up to 600’

with Key Digital®

KD-CAT6STP1X

KD-CATHD500FW

KD-HDDA1x4Pro

EDID Control

RS-232

KD-HDDA1x4Pro

EDID Control

RS-232

KD-HDDA1x4Pro

EDID Control

RS-232

Speakers

Sub-Woofer

Cable Box

Display 4

Display 3

Display 2

Display 1

Audio Rcvr.

Speakers

Sub-Woofer

Cable Box

Display 4

Display 3

Display 2

Display 1

Audio Rcvr.

Display 4

Display 3

Display 2

Display 1

DVI

DVI Video* DVI Video*

Desktop PC

EDID Control Settings

At times, your HDMI sources and display may not synchronize properly.

This is when EDID* control should be utilized. KD-HDDA Pro

Distribution Amps feature an internal library of EDID settings to ensure

your HDMI source’s output is compatible with the display devices.

Please reset the unit by either unplugging and plugging the HDMI

connections, or via a power cycle for the new settings to take effect.

Rotary EDID Settings:

KD-HDDA1x2Pro

EDID Settings

0Copy EDID from

HDMI Output 1

11080i, 2Ch Audio

21080i, Dolby/DTS 5.1

31080i, 2ch Audio

41080p, Dolby/DTS 5.1

51080p, HD Audio

61080p, 2ch Audio

73D, 2ch Audio

83D, Dolby/DTS 5.1

93D, HD Audio

A1280x1024 DVI

B1920x1080 DVI

C1920x1200 DVI

D1080p, 2Ch Audio

E1080p, 2Ch Audio

FCopy EDID from

HDMI Output 2

KD-HDDA1x3Pro

EDID Settings

0Copy EDID from

HDMI Output 1

11080i, 2Ch Audio

21080i, Dolby/DTS 5.1

31080i, 2ch Audio

41080p, Dolby/DTS 5.1

51080p, HD Audio

61080p, 2ch Audio

73D, 2ch Audio

83D, Dolby/DTS 5.1

93D, HD Audio

A1280x1024 DVI

B1920x1080 DVI

C1920x1200 DVI

D1080p, 2Ch Audio

ECopy EDID from

HDMI Output 3

FCopy EDID from

HDMI Output 2

KD-HDDA1x4Pro

EDID Settings

0Copy EDID from

HDMI Output 1

11080i, 2Ch Audio

21080i, Dolby/DTS 5.1

31080i, 2ch Audio

41080p, Dolby/DTS 5.1

51080p, HD Audio

61080p, 2ch Audio

73D, 2ch Audio

83D, Dolby/DTS 5.1

93D, HD Audio

A1280x1024 DVI

B1920x1080 DVI

C1920x1200 DVI

DCopy EDID from

HDMI Output 4

ECopy EDID from

HDMI Output 3

FCopy EDID from

HDMI Output 2

Example of EDID Auto Select:

If one of your system’s displays supports 1080p and the second display only supports up to

1080i (does not support 1080p), then the highest common EDID format supported is 1080i. By

choosing the Auto Select EDID Setting, your KD-HDDA Pro unit will inform your source device to

output 1080i in order to ensure all displays receive a supported signal.

Rotary EDID Control Switch

* EDID (Extended display identication data) is a data structure provided

by a display to describe its capabilities to a source device.

External Audio Outputs

Analog audio output via 3.5mm stereo phone jack

›2 channel analog audio output from the selected HDMI

input source

›Converts only 2 ch. PCM audio from the HDMI input to

2 channel analog audio output

›Only supports 2 ch. PCM audio, not multi-channel PCM,

Dolby, DTS, HD audio

Digital audio output via Coax/RCA

›Digital audio output from the selected HDMI input source

›Uses SPDIF format

›Supports PCM, Dolby, DTS; does not support multi-channel PCM or HD audio

Digital audio output via Optical

›Digital optical audio output from the HDMI input

›Uses SPDIF format

›Supports PCM, Dolby, DTS; does not support multi-channel PCM or HD audio

RS-232 Commands and Protocol

›KD-HDDA Pro units are compatible with all Control Systems, such as Compass Control

, AMX

Control4

, Crestron

, RTI

, Universal

›Connect your Control System’s Master Controller to the KD-HDDA Pro unit using the RS-232

port. Follow all instructions provided with your control system.

›RS-232 Protocol:

»Baud Rate = 57600 bits per second

»Data Bits = 8 / Stop Bits = 1

»Parity = None

»Flow Control = None

RS-232 Command Description

H Help

PF Power Off

PN Power ON

Video Output Setup Commands: xx = [01-02/03/04] (A=All)

SPO xx ON/OFF Set Output xx ON/OFF

Audio Output Setup Commands: [E=Enable, D=Disable]

SPO AA E/D Enable/Disable External Analog Audio Output

SPO DA E/D Enable/Disable External Digital Audio Output

System Address Setup Command: xx = [00-99], 00 = Single

SPC Axx Set System Address to xx

SPC DF Reset to Factory Defaults

›All RS-232 commands must be in

lower case letters

›Command must be terminated with

a carriage return

Mechanical / Technical Speciﬁcations

Inputs 1 HDMI Connector

Outputs 4/3/2 HDMI Connectors

Analog L/R Audio Output (3.5mm Stereo Phone Jack)

Digital Audio Output (Coax; 1 RCA Jack + TOSLINK)

Digital Audio Output (Optical: 1RCA Jack + TOSLINK)

Bandwidth TMDS bandwidth 10.2 Gb/s

Compliance With

HDMI Standard

All HDMI versions and HDCP.

Link Single Link: 1080p/60, 12 bit color depth, 1920x1200 max

Deep Color Support Supports digital video formats in Deep Color Mode at up to 12 bits/

color

Lossless

Compressed Digital

Audio

Supports lossless compressed digital audio

(Dolby

TrueHD, Dolby

Digital Plus and DTS

™

-HD Master Audio)

DDC Signal (Data) Input DDC Signal: 5 Volts p-p (TTL)

HDMI Video/Audio

Signal

Input Video Signal: 1.2 Volts p-p

HDMI Connector HDMI Connector: Type A, 19 Pin Female

I2C Communication EDID and HDCP Bi-Directional Transparency from Display to Source

EDID Control 16 Available EDID Settings

Power Source 5 Volt DC @ 2 Amp, 100-240 VAC, 50-60 Hz

Dimensions W=8.5”, H=1.75”, D=4”

Weight 2 Lbs

Important Product Warnings:

1. Connect all cables before providing power to the unit.

2. Test for proper operation before securing unit behind walls or in hard to access spaces.

3. If installing the unit into wall or mounting bracket into sheet-rock, provide proper screw support

with bolts or sheet-rock anchors.

Safety Instructions:

Please be sure to follow these instructions for safe operation of your unit.

1. Read and follow all instructions.

2. Heed all warnings.

3. Do not use this device near water.

4. Clean only with dry cloth.

5. Install in accordance with the manufacturer’s instructions.

6. Do not install near any heat sources such as radiators, heat registers, stoves, or other

apparatus (including ampliers) that produce heat.

7. Only use attachments/accessories specied by the manufacturer.

8. Refer all servicing to qualied service personnel. Servicing is required when the device has

been damaged in any way including:

»Damage to the power supply or power plug

»Exposure to rain or moisture

Power Supply Use:

You MUST use the Power Supply provided with your unit or you VOID the

Key Digital®Warranty and risk damage to your unit and associated equipment.

How to Contact Key Digital

System Design Group (SDG)

For system design questions please contact us at:

›Phone: 914-667-9700

›E-mail: [email protected]

Key Digital Trainings

For questions about Key Digital

Trainings please contact us at:

›Phone: 914-667-9700

›E-mail: [email protected]

Customer Support

For customer support questions please contact us at:

›Phone: 914-667-9700

›E-mail: [email protected]

Technical Support

For technical questions about using Key Digital

products, please contact us at:

›Phone: 914-667-9700

›E-mail: [email protected]

Marketing and Public Relations:

For marketing and public relations information, please contact us at:

›Phone: 914-667-9700

›E-mail: [email protected]

Repairs and Warranty Service

Should your product require warranty service or repair, please obtain a Key Digital

Return Material

Authorization (RMA) number by contacting us at:

›Phone: 914-667-9700

›E-mail: [email protected]

Feedback

Please email any comments/questions about the manual to:

›E-mail: [email protected]

Warranty Information

All Key Digital

products are built to high manufacturing standards and should

provide years of trouble-free operation. They are backed by a limited three-year

parts and labor warranty.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Key Digital Amplificatore

Key Digital

Key Digital HD View KD-ADA4 Manuale utente

Key Digital

Key Digital Chroma KD-HDMI2X4P Manuale utente

Key Digital

Key Digital Xplosion Series KD-CDA12P Manuale utente

Key Digital

Key Digital Champion KD-1X2 Manuale utente

Key Digital

Key Digital KD-DA1x4DC Manuale utente

Key Digital

Key Digital KD-HDRV1X2 Black Bull Manuale utente

Key Digital

Key Digital KD-CDA3 Manuale utente

Key Digital

Key Digital Xplosion Series KD-ADA4 Manuale utente

Key Digital

Key Digital KD-DA1x2KD-DA1x4KD-DA1x8 Manuale utente

Key Digital

Key Digital KD-DA1x2 Manuale utente

Key Digital

Key Digital KD-DA1x2DC Manuale utente

Key Digital

Key Digital KD-AMP220 Manuale utente

Key Digital

Key Digital Xplosion Series KD-SCDA8 Manuale utente

Key Digital

Key Digital KD-RGBDA8 Manuale utente

Key Digital

Key Digital Chroma KD-HDMI2X4P Manuale utente

Key Digital

Key Digital KD-DA2x8G Manuale utente

Key Digital

Key Digital KD-CDA12 Manuale utente

Key Digital

Key Digital Phantom KD-HDDA1X2 Manuale utente

Key Digital

Key Digital Chroma KD-HDMI2X4P Manuale utente

Key Digital

Key Digital Phantom KD-HD1x4ProK Manuale utente

Key Digital

Key Digital KD-RGBDA8 Manuale utente

Key Digital

Key Digital KD-DA1x2X Manuale utente

Key Digital

Key Digital Xplosion Series KD-SCDA8 Manuale utente

Key Digital

Key Digital Xplosion Series KD-DH12 Manuale utente

Manuali Amplificatore popolari di altre marche

ASTRO

ASTRO HVO V40 P Manuale utente

Marantz

Marantz SUPERSCOPE BLA-545 Istruzioni per il montaggio

NAD

NAD CI980 Manuale utente

Technics

Technics SE-CH770 Manuale utente

Harman Kardon

Harman Kardon HK6300 Manuale utente

NAD

NAD T975 Manuale utente

McIntosh

McIntosh MA6850 Manuale utente

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Manuale utente

Viatron

Viatron Autrix Manuale utente

GME

GME GA9800 Manuale utente

Atlas

Atlas CP700 Manuale utente

Roland

Roland KC-1000 Manuale utente

Pyle

Pyle PFMRA350BW Manuale utente

Advantage

Advantage S-250 Manuale utente

IRT Electronics

IRT Electronics DVA-3007 Manuale utente

Dimavery

Dimavery BA-100 Series Manuale utente

Sony

Sony XM-S400D Manuale utente

Schertler

Schertler ROY X Manuale utente