KHD KG100 Manuale utente

www.khd.hk

KG100 GNSS TRACKER

www.khd.hk

Index

1. Product profile .............................................................................. 3

2. Product Overview ......................................................................... 4

2.1 Main device ........................................................................................... 4

2.2 4 Pin cable ............................................................................................ 5

3. Product Initialization .................................................................... 5

3.1 Prepare works........................................................................................ 5

3.2 Setting steps ......................................................................................... 6

4. Functions ...................................................................................... 7

4.1 Real-time positioning .............................................................................. 7

4.2 Report by timing interval ........................................................................ 7

4.3 Mileage statistics .................................................................................... 7

4.4 Stop Engine (oil) / Recover Engine (oil) .................................................... 7

4.5 Alarm functions ...................................................................................... 8

4.5.1 Over speed alarm ................................................................................. 8

4.5.2 Terminal main power cut alarm ............................................................. 8

4.5.3 Fatigue driving alarm ............................................................................ 8

4.5.4 Custom Sensor Alarm ........................................................................... 8

4.6 Remote Control Functions ....................................................................... 9

5.6.1 Terminal Status Inquiry......................................................................... 9

5.6.2 Restore to factory default ..................................................................... 9

5.6.3 Remote restart Device ......................................................................... 10

5. Accessories ................................................................................. 10

www.khd.hk

1. Product profile

Thank you for choosing the company's KG100 GPS/GLONASS

tracking products, please carefully read the instructions before

operating.

KG100 satellite positioning system combined with anti-theft, positioning,

monitor and observe, alarm for help, advertising, vehicle scheduling and

tracking functions, it’s easy to use, easy to operate, the characteristics of a

full-featured, the main applies to vehicles and other mobile object location and

tracking services.

KG100 fully supports the GSM network data transmission function, GPRS

platform can be combined with software to make it more widely used in

large-scale cluster monitoring, emergency scheduling, location-based services,

fleet management, traffic safety management and many other fields.

Product Features:

 Support GPS/GLONASS real-time tracking.

 Support GPRS network data transmission.

 Support for multi-directional terminal parameter settings.

 Support for peer-to-peer monitoring, point to group control, group

all-round monitoring of the group.

 Combined with positioning, monitoring control, alarm, such as first aid and

tracking multiple functions with a full range of integrated products.

Note:

 Herein after referred to as the 【default user】refers to has been set and

saved to the product of all numbers communications devices. .

 If an error or a write command to send messages of non-default number of

instructions, this product will ignore it.

 All input commands must be uppercase letters in English, and need to use

Standard English punctuation, must not use other input method instead of

the English punctuation. And all SMS commands are no space character

between the contents.

 This product is factory default password for 【1234】, convenience-oriented

brochures to explain the following command operation for some of those

involved in your password are the product's default password 【1234】

 This product is not waterproof, choose the dry location to install, and pay

attention to water moisture.

 Please installed and use this product properly.

www.khd.hk

2. Product Overview

2.1 Main device

Power LED

4pin Cable

GSM antenna

GSM LED

GPS LED

www.khd.hk

2.2 4 Pin cable

Red: Power Positive pole

Black: Power negative pole

White: ACC detect

Yellow: Cut fuel Control

3. Product Initialization

After you get KG100 product, please familiar with it and test it before you install

it in a Car. Please test it according to the following steps.

4.1 Prepare works

 KHD GPS/GLONASS product

 Serial setting cable

 Local GSM SIM card

 12V DC power supplier

 Computer with COM port (if do not have COM port, can use USB to serial

cable instead)

www.khd.hk

 GPS client software

 Teamviewer (Optional, it is used for remote assist, used when you need get

help from supplier)

4.2 Setting steps

Step1

. Insert SIM card into the KG100.

Step2

. Connect the antennas (GSM antenna and GPS antenna) to device

Step3

. Connect the power cable to 12V DC power supplier (according to the diagram

of device connection in 3.0)

Step4.

Send command to set parameters. Devices need parameters to connect to

server via GPRS, such as Server IP/Port and APN. The following table shows

commands for setting these parameters.

No.

Name Command Reply Instruct

1 Set server

IP/Port

AS1234IPPO:192.168.1.1;77

77#

IPPO:192.168.1.1;7777

OK#

Reply content is “IP” “Port”.

The last part of IP must have 3

bit, if not, add 0 in front it. Last

bit before #,

2 Set Device ID AS1234IDDO:00012345# IDDO:00012345;OK Current“ID”

3 Set APN

AS1234APN:etaslat# APN: etaslat;OK APN setting

AS1234USER:GPRS# USER:GPRS;OK

AS1234GPRSPASS:GPRS#

GPRSPASS:GPRS;OK

4 Restart Device

AS1234RSGS# GSM/restart; OK Device restart

5 Factory set ASAX*%UPAS# PASSWORD:1234;OK All parameters recover to

factory, beside IP/Port/ID/APN

6 State query AS1234STATE#

Note:

1) All the command Character must write correctly, include punctuation/super-case or

lower-case, any incorrect input will cause command error.

2) The SIM card inserted in device must open SMS function, if not open will cause all

the command do not receive and execute

3) Device default password is: 1234.

Step5.

Access the URL: http://www.khdtrack.com

Step6.

Enter the account number and password

Step8.

Add the information of the device into database (include S/N (TEID),

car no, device type … and so on)

If you have any questions, please install Teamviewer, then contact

will our technique support.

www.khd.hk

4. Functions

5.1 Real-time positioning

Monitoring center can directly locate the specified vehicle terminal call view,

in-car terminal will immediately return to the central monitoring platform details

such as vehicle location data. Location information mainly include: time,

longitude, latitude, speed, location, location signs, vehicles and terminal status.

5.2 Report by timing interval

Monitoring center can specify the car back to the terminal for data transmission

interval timing settings, factory default upload interval of 30 seconds,

adjustable range is 5-65535 seconds; if interval is set to less than “5 seconds ",

the terminal device will automatically return to the "5 seconds."

5.3 Mileage statistics

The beginning of this equipment from loading automatically calculate mileage,

and mileage statistics from time to time to report to center platform, the center

can take advice on car mileage table stored data; also the centers can clear the

vehicle mileage data stored by platform, or be derived in accordance with set

time-related mileage statistics. Mileage statistics < "16000km".

5.4 Stop Engine (oil) / Recover Engine (oil)

Monitoring center can be personalized to the designated vehicle and a remote

disconnect the circuit or to restore the circuit, when the vehicle terminal

receives instruction on the oil line or restore the circuit to take down oil

movements.

(Note: Equipment in the implementation of action off the oil when it is the first

implementation of the three sub-batch 1 seconds off the oil 【off 15 seconds】

---- restored to the 4th when completely cut off oil line)

www.khd.hk

5.5 Alarm functions

5.5.1 Over speed alarm

Traffic speed alarm refers to the device in accordance with the speed to allow

the user to set the value of constantly monitoring the vehicle speed, when the

vehicle speed exceeds preset allowable value, the device will send over speed

alarm data reported to the Center, when the speed dropped to the default

values that the abolition of alarm. Center received alarm data may confirm or

cancel the alarm. Driving speed alarm set value in the 0-255 (km) range.

5.5.2 Terminal main power cut alarm

When the vehicle power supply was cut off the terminal will issued a power off

warning in 3 seconds, at the same time start the backup battery power supply

(can last around 4 hours), again automatically detect whether the alarm is

canceled after 30 seconds, Center received alarm information could confirm

and cancel alarm.

Note: The brown-out detection voltage threshold value <7V (DC).

5.5.3 Fatigue driving alarm

Overtime drive; also known as fatigue, driving is mainly a continuous

monitoring of driver fatigue, driving out to bring the traffic safety problems.

When the alarm function to open overtime driving, driving conditions to

determine the state of ACC in the ON state duration beyond the default values,

is central issue, when the ACC began to open the device time, when the preset

value is exceeded, the device will be immediately sent to the Center of fatigue

driving alert data, the user can confirm or cancel the alarm on demand.

5.5.4 Custom Sensor Alarm

The device with 2-way accustom test line (the test line of the definition and

installation please refer to the section described in the previous installation of

the 【Connection Diagram】) in order to meet specific customer needs. When

the user needs to customize sensor alarm function can be defined according to

their own needs the name of the line alarm. As defined by the test line before it

is triggered, the device will immediately send a custom alarm to the central

data center can be confirmed after the receipt of alarm information and cancel

alarm.

www.khd.hk

5.6 Remote Control Functions

5.6.1 Terminal Status Inquiry

There have a status inquiry command in software platform, when sending this

command to device, device will reply a status code like this:

"wXtX, spX, stpX, drX, idlX, stfX, csX, alrX, ocX, msX"

It means：

wt: “w” means the position behind the monitor settings (1 timer, 2 interval, other

means of closure), “ t “interval after that value,

stp : over speed

dr: fatigue set

idl: idling set

stf: the same as protocol “stf” status

cs :the same as “ st1-st4”， 4 bytes means car staus definition

alr : The same as “82” alarm status 3 bytes

oc :cut of fuel, 1: cut off fuel;”0” means normal status

ms: program state machine status bits (0- module initialization, 2- check signals,

4- check registration, 8- gprs connecting, 10- udp connecting, 20- connecting

center or to connect to normal center on standby, 40-gprs disconnect, 80-call

state)

sp: over speed

stp : said the parking timeout threshold,

dr said driver set threshold,

idl said the idle threshold,

stf with the protocol definition stf status bits,

cs with the protocol definition st1-st4, 4 bytes of vehicle conditions and definitions,

alr with the protocol definition 82 alarm state 3 bytes,

oc-off state gasoline and electricity, 1 for off petrol and electricity, 0 is normal,

5.6.2 Restore to factory default

To restore factory settings is to clear the main terminal settings, so that

www.khd.hk

terminal back to the original state. This feature will not clear the set of the IP,

ID, APN, time zone, standby mode.

Note: double check the communication parameters are correct before restore

the factory setting

5.6.3 Remote restart Device

Abnormal when an individual terminals on-line or for other reasons need to

restart the device, the user can correspond to the terminal through the

platform to restart the instruction issued.

5. Accessories

 KG100-type vehicle terminal 1 sets (built-in battery)

 4 PIN control cable 1

 Installation tool: A bag

 Breaking the fuel Relay 1 (DC12V 40A) (If you need to 24V relay please

advise in advance) (Optional)

Altri manuali per KG100

Indice

Altri manuali KHD GPS

KHD

KHD KG100 Manuale utente

Manuali GPS popolari di altre marche

Raven

Raven Cruizer II Manuale

Hama

Hama 53118 Manuale utente

Garmin

Garmin SOUNDER 125 Manuale utente

Garmin

Garmin DEZL 580 Manuale utente

Jigabot

Jigabot EX Manuale utente

Pointer

Pointer Cellocator CelloTrack XT LTE Guida all'installazione

Queclink

Queclink GV55LITE Manuale utente

Voxson

Voxson Voxtrack GPS500 Manuale di istruzioni

Garmin

Garmin ECHOMAP PLUS Manuale utente

Starcom Systems

Starcom Systems Kylos Compact Manuale utente

Garmin

Garmin 15 H Series Manuale utente

Cobra

Cobra Marine MC 600Ci Manuale utente

Cellocator

Cellocator CelloTrack T Manuale utente

Enfora

Enfora Mini-MT GSM2228UG001 Manuale utente

Magellan

Magellan eXplorist 100 Manuale utente

LTE

LTE G50B Manuale utente

Garmin

Garmin DEZL OTR500 Manuale utente

SkyGolf

SkyGolf SkyCaddie SG1 Manuale utente