Kikusui PMC 18-1A Manuale utente

Jun. 2009

Part No. Z1-004-632, IA004571

PMC 18-1A

PMC 18-2A

PMC 18-3A

PMC 35-0.5A

PMC 35-1A

PMC 35-2A

PMC 18-5A

PMC 35-3A

PMC 70-1A

PMC 110-0.6A

PMC 160-0.4A

PMC 250-0.25A

PMC 350-0.2A

PMC 500-0.1A

OPERATION MANUAL

REGULATED DC POWER SUPPLY

PMC-A SERIES

TYPE I

TYPE II

2PMC-A

Use of Operation Manual

Please read through and understand this Operation Manual before operating

the product. After reading, always keep the manual nearby so that you may

refer to it as needed.

If you find any misplaced or missing pages in this manual, they will be

replaced. If the manual gets lost or soiled, a new copy can be provided for a

fee. In either case, please contact Kikusui distributor/agent, and provide the

“Kikusui Part No.” given on the cover.

This manual has been prepared with the utmost care; however, if you have

any questions, or note any errors or omissions, please contact Kikusui dis-

tributor/agent.

Reproduction and reprinting of this operation manual, in whole or in part,

without written permission is prohibited.

Both unit specifications and manual contents are subject to change without

notice.

PMC-A 3

Power Requirements of this Product

Power requirements of this product have been changed and relevant sections

of the Operation Manual should be revised accordingly. (Revision should be

applied to items indicated by a check mark .)

Input voltage

The input voltage of this product is Vac,

and the voltage range is to Vac. Use the product

within this range only.

Input fuse

The rating of this product’s input fuse is A, Va c ,

and .

•To avoid electrical shock, always disconnect the

power cord or turn off the switchboard before

attempting to check or replace the fuse.

•Use a fuse element having a shape, rating, and

characteristics suitable for this product. The use of a

fuse with a different rating or one that short circuits

the fuse holder may result in fire, electric shock, or

irreparable damage.

✓

WARNING

4PMC-A

PMC-A 5

Safety Symbols

For the safe use and safe maintenance of this product, the following

symbols are used throughout this manual and on the product. Note the

meaning of each of the symbols to ensure safe use of the product. (Not

all symbols may be used.)

or

Indicates that a high voltage (over 1000 V) is used here.

Touching the part causes a possibly fatal electric shock. If physi-

cal contact is required by your work, start work only after you

make sure that no voltage is output here.

DANGER Indicates an imminently hazardous situation which, if ignored,

will result in death or serious injury.

WARNING

Indicates a potentially hazardous situation which, if ignored,

could result in death or serious injury.

CAUTION

Indicates a potentially hazardous situation which, if ignored, may

result in damage to the product and other property.

Shows that the act indicated is prohibited.

Indicates a general danger, warning, or caution.

When this symbol is marked on the product, see the relevant

sections in this manual.

Indicates a caution for hot surface of the product.

When this symbol is marked on the product, see the relevant

sections in this manual.

Protective conductor terminal.

Chassis (frame) terminal.

On (supply)

Off (supply)

In position of a bi-stable push control

Out position of a bi-stable push control

6PMC-A

Safety Precautions

The following safety precautions must be observed to avoid fire hazards,

electric shock, accidents, and other failures. Keep them in mind and make

sure to observe them.

Using the product in a manner that is not specified in this manual may

impair the protection functions provided by the product.

Users • This product must be used only by qualified personnel who

understand the contents of this operation manual.

•Ifunqualified personnel is to use the product, be sure the

product is handled under the supervision of qualified

personnel (those who have electrical knowledge). This is to

prevent the possibility of personal injury.

Purpose of use

•Never use the product for purposes other than the product's

intended use.

• This product is not designed or manufactured for general

home or consumer use.

Input power • Use the product within the rated input power voltage range.

• For applying power, use the power cord provided. For

details, see the respective page in the operation manual.

• This product is designed as an equipment of IEC

Overvoltage Category II (energy-consuming equipment

supplied from the fixed installation).

Fuse •Thefuse can be replaced with a new one. When replacing a

fuse, use the one which has appropriate shape, ratings, and

specifications. For details, refer to the specification section in

this manual.

Cover • Some parts inside the product may cause physical hazards.

Do not remove the external cover.

•When the product is under the operation, the surface of top

cover may get high temperature. It may cause burn on the

skin.

Operation

Manual

Line

Voltage

PMC-A 7

Grounding • This product is an IEC Safety Class I equipment (equipment

with a protective conductor terminal). To prevent the

possibility of electric shock, be sure to connect the protective

conductor terminal of the product to electrical ground (safety

ground).

Installation • This product is designed for safe indoor use. Be sure to use

it indoors.

•When installing this product, be sure to observe the

description in 2.2 Precautions Concerning Installation

Location in this manual.

Relocation •Turn off the POWER switch, and disconnect all cables

before relocating the product.

•When relocating the product, be sure to include the manual.

Operation •Ifamalfunction or abnormality is detected on the product,

stop using it immediately, and remove the power plug from

the outlet. Make sure the product is not used until it is

completely repaired.

• Use cables or wires with sufficiently large current capacity

for output wires and load cables.

• Do not disassemble or modify the product. If youneed to

modify the product, contact your Kikusui distributor/agent.

Maintenance

and

inspection

• To prevent the possibility of electric shock, make sure to

unplug the power plug before carrying out maintenance or

inspection. Do not remove the external cover during

maintenance or inspection.

• Check that the insulation coating of the power cord is not

broken and that the plug is not cracked or falling apart.

• If the panel needs cleaning, gently wipe using a soft cloth

with water-diluted neutral detergent.

• To maintain the performance and safe operation of the

product, it is recommended that periodic maintenance,

inspection, cleaning, and calibration be performed.

Service •Kikusui service engineers will perform internal service on the

product. If the product needs adjustment or repairs, contact

your Kikusui distributor/agent.

GNL

Check?

8PMC-A

How to Read This Manual

Preface

Thank youfor purchasing the PMC-A Series regulated DC

power supply.

This manual is intended for first-time users of the PMC-A

Series (hereafter abbreviated as: the PMC-A). It gives an

overview of the PMC-A and describes various settings,

operation, maintenance, safety precautions, etc.

Read this manual thoroughly to use the functions of the PMC-A

effectively. Youcan also review this manual; when youare

confused about an operation or when a problem occurs.

How to read this manual

This manual is designed to be read from beginning to end. We

recommend that youread the manual thoroughly from the

beginning before using the PMC-A for the first time.

Intended readers of this manual

This manual is intended for those using the PMC-A of

regulated DC power supply and teaching other users on how to

operate the PMC-A.

It assumes that the reader has knowledge of a regulated DC

power.

PMC-A 9

Notations used in this manual

The following marks are used with the corresponding

explanations in this manual.

Indicates an imminently hazardous situation which, if

ignored, could result in death or serious injury.

Indicates a potentially hazardous situation which, if

ignored, may result in damage to the product and other

property.

Indicates information that youshould know.

Explanation of terminology or operation principle.

Indicates reference to detailed information.

WARNING

CAUTION

DESCRIPTION

See

10 PMC-A

Contents

Safety Symbols - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -5

Safety Precautions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -6

How to Read This Manual - - - - - - - - - - - - - - - - - - - - - - - - - - - -8

Contents - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -10

Function index - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -13

Front panel - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -14

Rear Panel - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -16

Chapter 1 General Description

1.1 About This Manual - - - - - - - - - - - - - - - - - - - - - - - - - - - -17

1.2 Product Overview - - - - - - - - - - - - - - - - - - - - - - - - - - - - -17

1.3 Features - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -18

1.4 Options - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -19

Chapter 2 Installation and Preparation

2.1 Checking the Package Contents - - - - - - - - - - - - - - - - - -23

2.2 Precautions Concerning Installation Location - - - - - - - - -24

2.3 Precautions to Be Taken When Moving the Product - - - -26

2.4 Rack-mount Adaptor Installation - - - - - - - - - - - - - - - - - -26

2.5 Connecting the Power Cord - - - - - - - - - - - - - - - - - - - - -27

2.6 Ground (Earth) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -28

2.7 Turning On the Power - - - - - - - - - - - - - - - - - - - - - - - - -29

Inrush Current - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -30

Reverse Polarity - - - - - - - - - - - - - - - - - - - - - - - - - - - -30

Chapter 3 Connecting the Load

3.1 Load Considerations - - - - - - - - - - - - - - - - - - - - - - - - - -31

3.1.1 When the Load Current Has Peaks or is Pulse-shaped

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -31

3.1.2 When the Load Generates a Reverse Current to the

Power Supply - - - - - - - - - - - - - - - - - - - - - - - - - - - -32

3.1.3 When the Load Has Accumulated Energy Such As

Batteries - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -32

3.2 Connecting the Load - - - - - - - - - - - - - - - - - - - - - - - - - -33

3.2.1 Load Cable - - - - - - - - - - - - - - - - - - - - - - - - - - - - -34

Current capacity of the load cable - - - - - - - - - - - - - - - -34

Contents

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Kikusui Alimentazione elettrica

Kikusui

Kikusui PVS 7.5-300 Manuale utente

Kikusui

Kikusui MS512H Manuale utente

Kikusui

Kikusui PMX32-3TR Manuale utente

Kikusui

Kikusui PWX750MLF Manuale utente

Kikusui

Kikusui PAT-TM Series Manuale utente

Kikusui

Kikusui PWR401L Manuale utente

Kikusui

Kikusui PAT-T Series Manuale utente

Kikusui

Kikusui PAN 16-10A Manuale utente

Kikusui

Kikusui PLZ-5WH2 Series Manuale utente

Kikusui

Kikusui PAK10-300T Manuale utente

Kikusui

Kikusui PAD16-100L Manuale utente

Kikusui

Kikusui PAD-LA Series Manuale utente

Kikusui

Kikusui PCR6000LE2 Manuale utente

Kikusui

Kikusui PLZ2405WB Manuale utente

Kikusui

Kikusui PAD-L III Series Manuale utente

Kikusui

Kikusui PAT40-100T Manuale utente

Kikusui

Kikusui PCR-WE series Manuale utente

Kikusui

Kikusui PCR500MA Manuale utente

Kikusui

Kikusui PAD500-1.2A Manuale utente

Kikusui

Kikusui PLZ164W Manuale utente

Kikusui

Kikusui PBZ20-20 Manuale utente

Kikusui

Kikusui PCR-WE series Manuale utente

Kikusui

Kikusui PWR-01 Series Manuale utente

Kikusui

Kikusui PAV10-20 Manuale utente

Manuali Alimentazione elettrica popolari di altre marche

Monacor

Monacor PS-12CCD Manuale utente

VOLTIMA

VOLTIMA MagicBox 15 Manuale utente

Agilent Technologies

Agilent Technologies 6032A Manuale utente

Miller

Miller Auto Deltaweld 452 Manuale utente

BCP

BCP PUOUBK Foglio di istruzioni

HC 2210 Manuale utente

Puls

Puls CT5.241 Manuale utente

OCZ

OCZ ZX1250W Manuale utente

iseg

iseg ECH 238 Manuale utente

Power

Power XXL A Series Manuale utente

Agilent Technologies

Agilent Technologies 6631B Manuale utente

Renogy

Renogy PHOENIX 300 Manuale utente

HP 6200B Manuale di servizio

Epson

Epson Stylus Scan 2500 Manuale operativo

Pulsar

Pulsar GREEN POWER CCTV PoE POE044816 Manuale utente

Puls

Puls MiniLine ML50.100 Manuale utente

Puls

Puls AS-Interface SLA4.100 Manuale utente

Kenwood

Kenwood PS-60 Manuale utente