KING K 123 MeatMaster Manuale utente

Model No:
K 123 MeatMaster
Kıyma Makinası /
Meat Grinder Kullanma Kılavuzu / Instruction Manual
K 123
MeatMaster
Kıyma Makinası / Meat Grinder

(a)Switch(es) (b) Locking knob (c) Motor housing
(d)Opening (e) Food pusher (f) Hopper plate
(g) Head (h) Feed screw (i) Cutting blade
(j)~(n) Attachments (j) Cutting plate (fine) (k)Cutting plate (medium)
(l) Cutting plate (coarse) (m) Kubbe attachment A (n)Kubbe attachment B
(o) Cap

CAUTION
1. Unplug when assembling or disassembling the unit.
2. Close supervision is necessary when any appliance is used near children.
3. When carrying the unit, be sure to hold the motor housing with both hands;
do not hold only the hopper plate.
4. Do not fix the cutting blade and the cutting plate when using the
Kubbe attachments.
5. Never feed food with hands. Use the food pusher.
6. Do not grind hard foods such as bones and nuts.
(They will not be ground.)
7. Do not grind ginger and other materials with hard fiber.
(They will not be ground.)
8. To avoid jamming, do not force to operate the unit with excessive pressure.
If the unit jams due to hard materials lodged onto the feed screw or the cutting
blade,switch off immediately and clean the unit.
When the circuit breaker activates, do not switch on (See"Caution on
Jamming"on page 4.)
9. Never try to disassemble or repair the unit by yourself.
10. This product is intended for household use only.
11. If the supply cord is damaged, it must be replaced by a special cord or a cord
assembly available from our dealer/agent.
12. Never remove or attach the hopper plate, the head or cap when
the motor is operating.
13. Do not disassemble the grinder or place anything (especially finger,
spoon, fork, etc.) in the grinder during operation.
BEFORE USE
Make sure that the voltage and frequency indicated on the bottom are
the same as your local supply.
Wash all the parts (except those that do not touch foods
(a), (b),(C),(d), (p) and (q)) in warm soapy water.
Before plugging in, ensure the switch is off.

TO GRIND MEAT
ASSEMBLING
1. Place the head onto the opening of the motor
housing. Holding the head with one hand, place the locking knob into the hole
on the side of the motor housing and tighten it clockwise.
2. Place the feed screw into the head, long end first, by turning the feed screw
slightly until it is set into the motor housing.
3. Place the cutting blade onto the feed screw shaft with
the blade facing the front as illustrated.
If it is not fitted properly, meat will not be ground.
4. Place the desired cutting plate next to the cutting blade, fitting protrusions
in the slots.
5. Screw the cap into place until tight.
• Do not over tighten. Place the hopper plate on the head and fix into position.
Set the unit on a firm surface.
• The air passage at the bottom and the side of the motor housing
should be kept free and not blocked.
Grinding Meat
Cut all foods into pieces so that they fit easily into the hopper opening.
Plug in,then switch on.
6. Feed foods into the hopper plate.
Use the food pusher.
After use, switch off and unplug.
Note:
• The grinder head may rotate slightly during use, but it is normal.
Do not over tighten the knob to stop this movement.
It may cause damage.
After the machine operates for four hours continuely,
Please stop for half hour and then you can operate it.

MAKE KUBBE
Recipe
STUFFING
100g mutton
1 1/2 tablespoons olive oil
1 1/2 tablespoons onion( cut finely)
1/3 teaspoon all spice
1/2 teaspoon salt
1 1/2 tablespoons flour
Grind mutton once or twice.
Fry onion until brown and add minced mutton, all spice, salt and flour.
OUTER COVER
450 g lean meat
150-200g flour
1 teaspoon all spice
1 nutmeg
a pinch powdered red pepper
dash pepper
Grind meat three times and mix all ingredients together in a bowl.
• More meat and less flour for outer cover creates better consistency and teste.
Grind the mixture three times.
Disassemble by reversing the steps from [5]-[3] to remove the cutting plate
and the cutting blade.
7. Place the Kubbe attachments A and B onto the feed screw shaft together,
fitting protrusions in the slots.
8. Screw the cap into place until tight.
•Do not over tighten.
9. Following the same steps asin[5]-[6j make the cylindrical outer cover.
Form kubbe as illustrated below and deep fry.

SATIŞ SONRASI SERVİS
Cihazda bir arıza olması halinde King Yetkili Servisi’ne başvurmadan önce
aşağıdaki kontrolleri yapınız.
1- Fiş prize doğru olarak takılmış mı?
2- Evin elektrik tesisatında bir problem var mı?
3- Kullanım talimatları doğru olarak uygulanmış mı?
Eğer arıza halen giderilmediyse size en yakın King Yetkili Servisi’ne müracaat ediniz.
Bu cihazla ilgili tüm yedek parçalar kılavuz kitapçığında sunulan King Yetkili
Servisi’nden temin edilebilir. Bir sorun ile karşılaştığınızda lütfen bizi arayınız.
DİKKAT: Cihazı yere düşürmemeye dikkat ediniz. Kullanım esnasında cihazı
düşürürseniz ilk olarak fişini prizden çekiniz. Düşme esnasında cihazın parçaları
kırılabilir ve cihaz hasar görebilir. Bu durumda cihazı kullanmadan önce King
Yetkili Servisi’ne tetkik ettiriniz.
TAŞIMA VE NAKLİYE
Cihazın naklini kendi orjinal kutusu ve bölmeleri ile veya cihazın etrafını koruyacak
yumuşak bir bezle sararak yapmak gerekir. Yanlış ambalajlama esnasında plastik
parçalar kırılabilir, elektrik aksamı zarar görebilir.
NOT: ÜRÜNÜN MÜŞTERİYE İNTİKALİNDEN SONRA YÜKLEME, BOŞALTMA VE TAŞIMA
SIRASINDA OLUŞAN ARIZALAR VE HASARLAR GARANTİ KAPSAMINA GİRMEZ.
UYARI: Bu cihazla ilgili her türlü tamir ve onarım yalnız King Yetkili Servisleri tarafından yapılır.
Yetkili Servislerimiz dışındaki kişilerce yapılan herhangi bir tamir ve onarımı girişimi tüketici
haklarının tamamen ortadan kalkmasına neden olacaktır. Bu cihazla ilgili tüm yedek parçalar
yalnız bu kılavuz kitapçığında sunulan King Yetkili Servisleri’nden temin edilmek zorundadır.
King Servislerinden temin edilmemiş King harici yedek parçalar ile yapılan tamiratlardan
şirketimiz sorumlu değildir. Bir sorun ile karşılaştığınızda lütfen bizi arayınız.
Çevre: Cihazınızı kullanmak istemediğiniz
zaman veya ömrü tükendiğinde diğer çöplerle
birlikte atmayınız. Tekrar dönüşüm için
cihazları toplayanlara veriniz. Böylece çevreye
saygı göstermiş olursunuz.




Indice
Lingue:
Altri manuali KING Tritacarne


















