5
!!! Warning: To reduce the risk of fire or electric shock, install in temperature and
humidity controlled indoor area of conductive contaminants.
-Read the user manual and familiarize yourself with the functions before you
attempt to use this equipment.
-To prevent fire or shock hazard, do not expose this appliance to rain or moisture.
-Do not dispose of in fire to prevent injury or burns. Also do not place the units near
the heat sources such as radiator, heat registers, stoves, or other devices (including
amplifiers) that produce heat.
-Do not disassemble the machine with power on. If you do, you may receive an
electric shock.
-Do not set these units near the water near following area: bathtub, washbowl,
kitchen sink, laundry tub, wet basement, or swimming pool.
-Do not place heavy objects on the power cord. If the cord is damaged, fire, or
electrical shock may result. In particular, it is possible that one might accidentally
place a heavy object on a carpet that covers the cord; definitely avoid these
situations!
-Do not install the UC384 DDC in a place where it might be exposed to oil, smoke or
steam (for example, near a cooking table or humidifier). Otherwise, fire or electrical
shock may result.
-Do not place the power cord near a heating device. Otherwise, the cord sheath may
melt, resulting in fire or electrical shock.
-Obstruct the necessary all- around ventilation: especially DO NOT place the set
close to curtains or on soft furnishing such as carpets. Overheating can cause
unnecessary damage and shorten the lifespan of the equipment.
-No user serviceable parts inside. Refer servicing to qualified technician. Never
remove the cover unless qualified to do so. This unit contains dangerous voltage.
-When you remove the power plug, be sure to hold the plug. Never pull on the cord.
Otherwise, the power cord may become damaged, resulting in fire or electrical
shock.
