KingShield A4N Guida all'installazione
1. Dis onne t from the mains supply before
pro eeding with the installation.
2. These produ ts should be onne ted to a lighting
ir uit or fused at a maximum of 5A.
3. The transformer in orporated in these produ ts has
an isolating 20VA loading and an output of 230V
and 115V on the dual voltage version and 230V on
the single.
4. Please he k with the manufa turers instru tions
for suitability with re hargeable shavers.
These units must be mounte horizontally on a
vertical surface. Please rea the instructions fully
before attempting installation an retain for future
reference.
1. Remove the diffuser by gently pressing the sides at
the point indi ated, in Fig.1, and lift out.
2. Remove the 60 watt 284mm tube by gently pushing
it sideways into the right hand or left hand so ket
and removing it from the so kets See Fig. 2
3. Remove the ba k plate of the shaver light and using
a template mark fixings in the required position on
the wall, and drill fixing holes a ordingly.
4. Conne t the able by passing through the hole in
the ba k plate and follow the odes as listed:
Live (L) = Brown or Red, Neutral (N) = Blue or
Bla k, ondu tor size 0.5mm to 1.5mm solid or
stranded, ensure that no strands of able are visible
outside the onne tor.
5. Pla e shaver light into position with bla k plate
se ured and s rew into wall with appropriate
s rews through the holes in the base of the unit.
6. Repla e the lamp and diffuser.
7. Swit h ba k on the mains supply and shaver light is
now ready for use.
Before plugging in the shaver, sele t the orre t out
put voltage (230 or 115) with the swit h provided
(dual voltage version only).
SAFETY AND INSTALLATION
INSTRUCTIONS FOR
BATHROOM SINGLE & DUAL
VOLTAGE SHAVER LIGHT
- Mo el No. A4N
SAFETY INSTRUCTIONS
INSTALLATION INSTRUCTIONS
Fig. 2
Fig.1
IMPORTANT
This unit should be installed to cu ent IET wi ing
egulations, if in doubt consult a qualified elect ician.
A4N instr ctions A g14.qxp_Layo t 1 07/11/2014 11:42 Page 1
Power Rating: 230V 50Hz supply
115V/230V output
IP Rating: IP20
F Marke : Can be mounted on
flammable surfa es
Transformer: 20VA overload prote ted
Insulation: Double insulated lass
II transformer
Diffuser: Safety interlo ked
Lamp Type: 60W 284mm double
ap striplight
Lamp Output.
Average Life: 1000 hours
Lamphol er: S15
Lumen output: 500
Colour Temp: 2500 - 3000K
Lamp Size: 284 length + 1mm
26Dia + 1mm
Dimmable: Yes
Energy Consumption: 60 KWH/1000 hours
Energy rating: E
CRI: >80
TECHNICAL DATA
Issue No: 703968
WEST ROAD . HARLOW
ESSEX . CM20 2BG . UK
sales@greenbrook. o.uk
www.greenbrook.co.uk
PLEASE KEEP THESE INSTRUCTIONS SAFE
FOR FUTURE REFERENCE
GUARANTEE
Your KingShield Bathroom Shaver Light
is guaranteed for 12 months from
the date of pur hase.
This is in addition to your
statutory rights.
A4N instr ctions A g14.qxp_Layo t 1 07/11/2014 11:42 Page 2
Indice
Altri manuali KingShield Attrezzatura di illuminazione
