Kinpo Electronics A100A K2 Manuale utente
Kinpo Electronics, Inc.
SAM ADSL Network Modem
Model:A100A (K2)
Installation Manual
Version : E1
Date : Oct. 22, 1999
Software: Itex
1
CONTENTS
ABOUT THIS GUIDE
1. INTRODUCTION.....................................................................................................................................2
2. INSTALLING THE ADSL NETWORK MODEM BOARD................................................................4
3. INSTALLING THE SAM DEVICE DRIVERS AND DIAGNOSTICS (ITEX ADSL SAM TEST
APPLICATION) .......................................................................................................................................5
4. VERIFYING THE DRIVER INSTALLATION..................................................................................10
5. CONFIGURING THE ADSL NETWORK (TCP/IP) FOR RFC1483...............................................11
6. CONFIGURING THE ADSL NETWORK (TCP/IP) FOR RFC1577...............................................15
7. CONFIGURING THE ADSL NETWORK MODEM FOR PPP OVER ATM.................................18
7.1 SETTING UP PPP OVER ATM........................................................................................................18
7.2 ESTABLISHING A PPP OVER ATM CONNECTION...................................................................18
8. ACTIVATING THE SAM ADSL NETWORK MODEM ..................................................................19
9. MONITORING THE SAM ADSL NETWORK MODEM.................................................................19
10.UNINSTALLING THE SAM ADSL NETWORK MODEM AND TEST APPLICATION...........19
11.SPECIFICATIONS................................................................................................................................20
Preliminary
2
1. INTRODUCTION
ADSL Network
This is a diagram showing how an ADSL network looks.
Teleco
Public switch
Telephone
Telephone
The Internet
PC
Laptop computer
Fax
Telephone
SOHO
SOHO
Simutanious Voice, Video, Data and Image
Simutanious Voice, Video, Data and Image
3
System Requirement
The following equipment and information is required (at a minimum) to
setup your ADSL network modem.
[PC system requirement]
1. IBM PC and compatibles running a Pentium II, Pentium III, AMD or
Cyrix 300MHz CPU or faster
2. 32Mbyte main memory and 10 Mbytes hard disk space
3. Microsoft Windows 98, 95, NT4.0 or 2000
[ADSL network]
1. Subscribe to an ADSL service from your local telephone company or
have access to an ADSL DSLAM.
2. An IP address, gateway and DNS numbers from your telephone
company (for ADSL network configuration) or network administrator.
3. A VCI and VPI values from your telephone company (for ADSL network
configuration) or network administrator.
4
2. INSTALLING THE ADSL NETWORK MODEM BOARD
Before installing the ITeX ADSL Network Modem board, please make sure that
the following minimum system requirements are met.
Minimum System Requirement
[PC System Requirement]
1. IBM PC and compatibles running a Pentium II, Pentium III, AMD or Cyrix
300MHz CPU or faster
2. 32Mbyte main memory and 10 Mbytes hard disk space
3. Microsoft Windows 98, 95, NT4.0 or 2000
[ADSL Network Subscription]
1. Subscribe to an ADSL service from your local telephone company or service
provider or have access to an ADSL DSLAM.
2. An IP address, gateway and DNS numbers from the telephone company (for
ADSL network configuration) or from your network administrator.
3. A VCI and VPI value from your telephone company (for ADSL network
configuration) or network administrator.
Before installing the ITeX ADSL Network Modem, please make sure that the
power to the computer is turned off. Remove the cover of the personal computer.
Insert the ITeX ADSL Network Modem into one of the free PCI slots available.
Consult your computer's manual for instructions on where to find the PCI slot.
Make sure that the network modem is securely fastened into the computer.
Connect the ADSL phone line directly to the RJ-11 connector marked "L". If
there is no marking, then connect the ADSL phone line to the top connector of
the modem. Also, since the ITeX ADSL Network Modem comes equipped with
an inline filter, you can attach a phone directly to the second RJ-11 jack.
5
3. INSTALLING THE SAM DEVICE DRIVERS AND DIAGNOSTICS (ITEX
ADSL SAM TEST APPLICATION)
Please have the following information available in order to complete the
installation and setup of the ITeX SAM ADSL Network Modem.
1. TCP/IP properties, this includes the PVC values (VPI and VCI), IP address,
the gateway, and the domain name server. You will need this information to
complete the configuration of the network modem card. Please contact your
MIS manager for more information regarding the TCP/IP settings.
2. Windows 98 CD.
3.1 Windows 98
This installation guide will walk the user through the installation of the ITeX SAM
ADSL Network Modem software drivers and help to configure the modem.
Windows will find the ITeX ADSL Network Modem and will search for a device
driver for the card. Click Next.
6
The Add New Hardware Wizard window will appear. When prompted, select
"search for the best driver for your device. (Recommended). Click Next.
Insert the SAM ADSL Software Drivers CD into your CD-ROM drive and select
the "Specify a location" option from the menu and type “Drive:\win95_98 or
win98sec_2000 (where is your CD_ROM drive). Click Next.
7
Windows should find the NETITEX.INF file in the floppy disk drive. If this is
correct, then click Next to continue. Otherwise, click Back to re-enter the location
of the driver. Windows may not be able to find some of the Windows 98 files. If
so, enter the location of the Windows 98 CD and proceed with the installation.
Windows will start to copy the drivers. Make sure that the Windows 98 CD is in
the CD-ROM or that it is easily accessible.
8
For RFC1483, the default PVC values are 8 and 35 for VPI and VCI respectively.
If necessary, these values can be changed at this time.
Windows has finished installing all the ITeX ADSL Network Modem drivers. Click
Finish to complete the installation.
9
Click Yes when prompted "Do you want to restart your computer now?" Proceed
to installing the SAM Diagnostic Software.
3.2 INSTALLING THE SAM DIAGNOSTIC SOFTWARE (ITeX ADSL K2 Test
Application)
After installing the drivers, Windows will ask if you want to install the SAM
diagnostic software (ITeX ADSL K2 Mapi). Click Yes to continue. To install the
software into the default folder, click Next. Otherwise, click Browse to select a
different folder. Click Next again to complete the installation. Select "No", when
asked if you want to restart your computer". Click OK.
Questo manuale è adatto per i seguenti modelli
1
Indice
