Kirale Technologies KTBRN1 Manuale utente
KTBRN1 Border Router
Quick Start Guide
Introduction
Installation and setup of the KTBRN1 Thread Backbone
Border Router.
KTBRN1 Quick Start Guide
April 2020, v2.1
© Kirale Technologies
2
Disclaimer
INFORMATION IN THIS DOCUMENT IS SUBJECT TO CHANGE
WITHOUT NOTICE AND DOES NOT REPRESENT A
COMMITMENT ON THE PART OF KIRALE TECHNOLOGIES.
KIRALE TECHNOLOGIES PROVIDES THIS DOCUMENT “AS IS,”
WITHOUT WARRANTY OF ANY KIND, EXPRESSED OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
OF FITNESS OR MERCHANTABILITY FOR A PARTICULAR
PURPOSE. KIRALE MAY MAKE IMPROVEMENTS AND/OR
CHANGES IN THIS MANUAL OR IN THE PRODUCT(S) AND/OR
THE PROGRAM(S) DESCRIBED IN THIS MANUAL AT ANY TIME.
Trademarks and Copyright
© 2020 Copyright - Kirale Technologies S.L.
All Rights Reserved. No part of this document may be
photocopied, reproduced, stored in a retrieval system, or
transmitted, in any form or by any means whether, electronic,
mechanical, or otherwise without the prior written permission of
KiraleTechnologies.
Kirale® and Kirale Technologies logos are registered trademarks
of Kirale Technologies S.L. Other trademarks are the property of
their respective owners.
Contact Information
Kirale Technologies S.L.
General Vara de Rey 9, 5B
26001 –Logroño (SPAIN)
+34 941 578 578
https://www.kirale.com
KTBRN1 Quick Start Guide
April 2020, v2.1
© Kirale Technologies
3
Contents
Introduction................................................................................................................................................................1
Disclaimer ..................................................................................................................................................................2
Trademarks and Copyright .....................................................................................................................................2
Contact Information .................................................................................................................................................2
Contents..............................................................................................................................................................................3
Revision History.................................................................................................................................................................4
1. Required Components................................................................................................................................................5
2. Installation Guide ........................................................................................................................................................6
2.1. Download required software..........................................................................................................................6
2.2. Flash image to SD card...................................................................................................................................6
2.3. First time installation ......................................................................................................................................7
3. Web Administration Panel .......................................................................................................................................11
3.1. Change network configuration ....................................................................................................................12
3.2. Update KiBRA .................................................................................................................................................13
3.3. Configure Border Router...............................................................................................................................14
3.4. Start-up Border Router .................................................................................................................................17
3.5. Services............................................................................................................................................................21
3.6. Visual Network................................................................................................................................................25
3.7. Logs...................................................................................................................................................................26
4. A brief insight .............................................................................................................................................................27
4.1. Advanced filesystem......................................................................................................................................27
4.2. Critical services ..............................................................................................................................................27
4.3. Inter-process communication......................................................................................................................28
KTBRN1 Quick Start Guide
April 2020, v2.1
© Kirale Technologies
4
Revision History
Date
Revision
Changes
08/2019
1.0
Initial release.
10/2019
1.1
Updated content with more explanations and screenshots.
02/2020
2.0
New version 2.0
04/2020
2.1
New features and contents added
KTBRN1 Quick Start Guide
April 2020, v2.1
© Kirale Technologies
5
1. Required Components
Before beginning with KTBRN1 installation, it is recommended to have the following list
of components in place:
A KTBRN1 device.
A micro SD card, recommended class 10 A1-rated and at least 2 GB of capacity.
A USB Type-A male to micro USB Type-B cable.
An Ethernet cable.
A personal computer.
KTBRN1 Quick Start Guide
April 2020, v2.1
© Kirale Technologies
6
2. Installation Guide
2.1. Download required software
Make sure you get the latest release of our Debian-based image for KTBRN1 that includes
KiBRA software, which you will can find on our website, in the following URL.
KTBRN1 + KiBRA image file
Likewise, download the file KiBRA-v2.x.x.zip for later use.
The following software is needed in order to update the image stored in your SD card or
to flash a new one.
Balena Etcher
A Serial terminal or/and SSH client will be required for connecting to KTBRN1 device.
MobaXterm free (Any other software can be used)
Zadig (in case of needing to install USB Serial drivers)
2.2. Flash image to SD card
In case it is needed to update or flash an image to SD card, please follow the instructions
bellow:
1) Install and launch Balena Etcher.
2) Select the file with extension
.gz
in Etcher.
3) Put the micro SD card in a card reader in the computer and select it in Etcher. It is
recommended to use micro SD card class 10 A1-rated and at least 2 GB of
capacity.
KTBRN1 Quick Start Guide
April 2020, v2.1
© Kirale Technologies
7
4) Press Flash and wait to finish.
5) Eject the SD card from the computer and place it in the KTBRN1 card holder.
2.3. First time installation
Connect a USB cable to the KTBRN1 and to PC or USB hub. The first time you turn on
the KTBRN1 device, it will take about a couple of minutes to be ready to accept
connections. Please do not turn off the system until the first-time installation process
has completely finished.
After that, you can access KTBRN1 through USB Serial port by following the instructions
bellow.
KTBRN1 Quick Start Guide
April 2020, v2.1
© Kirale Technologies
8
2.3.1. Connecting via USB Serial port
A new serial device should be listed (
Pi USB to Serial
) depending on your OS. It may be
required to install the driver for the USB Serial port, so check if the device has been
recognized by your PC.
If such is the case, install the driver by means of Zadig tool.
KTBRN1 Quick Start Guide
April 2020, v2.1
© Kirale Technologies
9
Once you have got access to KTBRN1 via USB serial, launch MobaXterm and open a new
Serial session with the new listed port and speed 115200, then a login console should
appear after clicking enter. Login with user root, password kirale123.
KTBRN1 Quick Start Guide
April 2020, v2.1
© Kirale Technologies
10
The welcome screen will show you information about IP addresses configured in
KTBRN1 and what KiBRA version is running.
By default, the provided image comes configured with a static IPv4 address for Ethernet
interface:
IPv4 address: 192.168.75.84/24
Furthermore, it comes with IPv6 protocol enabled for Ethernet interface so that it is
possible to access Web Administration as well as SSH port by means of IPv4 and IPv6
(link-local) addressing.
Indice
Manuali Router di rete popolari di altre marche
NETGEAR
NETGEAR FS526T - Switch Manuale utente
Korenix
Korenix JetNet 5710G Series Manuale utente
Automated Logic
Automated Logic ZN551 Manuale del proprietario
Cisco
Cisco ASR 1000 Series Manuale dell'operatore
EnGenius
EnGenius ESR-9710 Manuale utente
Cisco
Cisco 805 Series Istruzioni operative e di sicurezza