Mounting
instructions
On LV1 Mounting bracke
Secure the ackplate and the Aluminium mounting frame to
the LV1 mounting bracket by using the 2 wall mounted
screws
Connect the Reader Pro to the cabling in place (Cat 6 or low
voltage wires)
Insert the Reader Pro inside the aluminum mounting frame
and then slide up the Reader Pro
Secure the Reader Pro by installing the security screw (hex
key provided).
Page 2/4
On metalic prol
Drill a hole of at least 7/8 inch (22.2mm) of diameter in the
metallic prole
Secure the Aluminium mounting frame to the metallic prole
using the 2 self tapping screws
Connect the Reader Pro to the cabling in place (Cat 6 or low
voltage wires)
Insert the Reader Pro inside the aluminum mounting frame
and then slide the Reader Pro in the upper direction
Secure the Reader Pro by installing the security screw (hex
key provided).
Reader Pro Mounting frame ackplate LV1 Mounting bracket
Reader Pro Mounting frame Aluminium frame
Kisi Reader Pro
