KitchenAid KSBC2F1 Series Manuale utente
KSBC2F1XX
Cord cleat
(not shown)
PARTS AND FEATURES
PARTS AND ACCESSORIES
Ingredient
cap with
measuring
cup
Flex Edge
tamper
Lid
Talon™
blade
Base
On/off
switch
(not shown)
Start/Stop toggle switch
Pulse toggle switch
Control
dial
Open handle
for easy
stackability
Removable blender
jar pad
Blender jar
Status indicator light
Power cord
socket and
removable
power cord
(not shown)
Power cord
socket and
removable
Motor horsepower for the blender motor was measured using a dynamometer, a machine
that laboratories routinely use to measure the mechanical power of motors. Our 3.5 peak
horsepower (HP) motor reference reects the horsepower output of the motor itself and
not the Blender’s horsepower output in the blender jar. As with any blender, the power
output in the blender jar is not the same as the horsepower of the motor itself. This
motor delivers 2.45 peak HP in the blender jar, enabling your Blender to deliver robust
power for all your recipes.
ENGLISH
COMMERCIAL BLENDER SAFETY | 3
COMMERCIAL BLENDER SAFETY
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always
be followed, including the following:
1. Read all instructions.
2. To protect against risk of electrical shock, do not put Blender in water
or other liquid.
3. Close supervision is necessary when any appliance is used by or
near children.
4. Unplug from outlet when not in use, before putting on or taking off parts,
and before cleaning.
5. Avoid contact with moving parts.
6. Do not operate the Blender with a damaged cord or plug or after appliance
malfunctions, or is dropped or damaged in any manner. Return appliance
to the nearest Authorized Service Center for examination, repair, or electrical
or mechanical adjustment. If the supply cord or plug is damaged, it must be
replaced by a special cord or assembly available from the manufacturer or
service agent.
7. Do not use outdoors.
8. Do not let cord hang over edge of table or counter.
4 | COMMERCIAL BLENDER SAFETY
COMMERCIAL BLENDER SAFETY
9. Keep hands and utensils out of container while blending to reduce the risk
of severe injury to persons or damage to the Blender. A spatula or scraper
other than the provided Flex Edge tamper may be used, but must be used
only when the Blender is not running.
10. Blades are sharp. Handle carefully.
11. The use of attachments, including canning blender jars, not recommended
by KitchenAid may cause a risk of injury to persons.
12. Do not use appliance for other than intended use.
13. Always operate Blender with cover in place.
14. When blending hot liquids or ingredients, ingredient-measuring cup should
remain in place over the lid opening. Always start on lowest speed and
slowly ramp to desired speed when blending hot liquids or ingredients.
SAVE THESE INSTRUCTIONS
This product is designed for commercial use.
ELECTRICAL REQUIREMENTS
Voltage: 120 V
Frequency: 60 HZ
Amps: 15.0 A
NOTE: If the plug does not fit in the
outlet, contact a qualified electrician. Do
not modify the plug in any way. Do not
use an adapter.
Do not use an extension cord. If the power
supply cord is too short, have a qualied
electrician or serviceman install an outlet
near the appliance.
ENGLISH
USING THE COMMERCIAL BLENDER | 5
USING THE COMMERCIAL BLENDER
The Blender has a preset recipe program: Coulis Cycle. It also features Variable Speeds
and Pulse functions that allow you to customize your blending for any recipe you make.
To clean the Blender: Quick pulses of power and high speeds work to clean the blender
jar with just 2 cups of water and a drop of dish soap.
BLENDER FUNCTION GUIDE
SETTING DESCRIPTION BLENDING TIME
(IN MIN:SEC)
COULIS
Blends fluid gels into a smooth mixture. A series of pulses
and speeds run before the unit gradually ramps up to full
power before it finishes with a slow speed to allow air to
escape from the fluid. For best results, cut or crumble gel
into 1/2'' cubes before blending. Limit gel to 500-1000
grams. Do not exceed 1000 grams in the jar. You may need
to use the tamper for thicker fluid gels.
< 3 minutes
VARIABLE
SPEEDS
When the Start/Stop switch is pressed, the Blender will run
continuously until the Start/Stop switch is pressed again,
or after 6 minutes have elapse.
N/A
:30 When the :30 time is selected, the Blender will gradually
ramp up to full power and run for 30 seconds total. :30
:45 When the :45 time is selected, the Blender will gradually
ramp up to full power and run for 45 seconds total. :45
:60 When the :60 time is selected, the Blender will gradually
ramp up to full power and run for 60 seconds total. :60
6 | USING THE COMMERCIAL BLENDER
USING THE COMMERCIAL BLENDER
Before first use
Before using your Blender for the rst
time, wipe the blender base with a warm
damp cloth, then wipe clean with a damp
cloth. Dry with a soft cloth. Wash the
blender jar, lid, and ingredient cup in warm,
sudsy water (see the “Care and cleaning”
section). Rinse parts and wipe dry.
1
Before using the Blender, be sure the
countertop beneath the Blender and
surrounding areas are dry and clean.
Be sure the power switch on the back
of the blender base is in the OFF
(O) position and the cord is also fully
plugged into the back of the Blender.
Then, plug the Blender into
a grounded 3 prong outlet.
2
The main power switch is on the
back of the blender base. Flip the
POWER switch to the ON (I) position.
The status indicator light above the
Start toggle button will begin to
flash, indicating that the Blender is in
Standby mode. The Blender is now
ready to operate.
PREPARING THE COMMERCIAL BLENDER FOR USE
NOTE: The cord cleat is not to be used
as a handle; the cord cleat is designed to
wrap the power cord around it for
storage only.
ENGLISH
USING THE COMMERCIAL BLENDER | 7
USING THE COMMERCIAL BLENDER
3
Flip the START/STOP toggle switch
up or down to begin operation of the
Blender. The status indicator light will
now be solid.
4
Turn the control dial to your desired
speed, time, or program. See the
“Blender function guide” for more
information.
ASSEMBLING AND RUNNING THE COMMERCIAL BLENDER
NOTE: To avoid spills, do not fill blender
jar past the top-most measurement mark,
especially when blending liquids.
1
Put the items to blend into the
blender jar. Add liquids first, then
soft foods, then leafy greens, and
ice or frozen items last.
2
Make sure that the lid is fully secured
on the blender jar; next, place the
blender jar on the base, making sure
that it is fully aligned on the jar pad.
NOTE: If you select a preprogrammed
cycle, you will need to ip the START/
STOP toggle to begin operation.
8 | USING THE COMMERCIAL BLENDER
5
Use the Flex Edge tamper accessory
as needed for optimal blending
performance. Remove the ingredient-
measuring cap only, and leave the
lid in place. Stir or press contents
down towards the blade. When you
are finished, replace the ingredient-
measuring cap in the blender jar lid
before resuming blending.
6
If desired, use the Pulse function for
a momentary boost of speed while
blending on the variable speed
settings.
Press and hold the PULSE toggle
switch up for a faster pulse, or down
for a slower pulse.
7
After blending, flip the START/STOP
toggle switch up or down. Allow the
Blender to come to a complete stop
before removing the lid and pouring
your blended ingredients.
8
If the Blender remains in standby
mode for 28 minutes with no
activity, the Blender will enter sleep
mode. To get out of sleep mode,
press the START/STOP switch once
to bring into standby mode. Then,
press START/STOP once more to
start the Blender.
USING THE COMMERCIAL BLENDER
NOTE: The Pulse function may also
be used on its own as a separate
blending function while the Blender
is in standby mode.
ENGLISH
CARE AND CLEANING | 9
1
To clean the blender base and cord:
Unplug the Blender before cleaning.
Wipe the base and the cord with a
warm, damp cloth; wipe clean with a
damp cloth, and dry with a soft cloth.
2
Make sure to clean the blender jar,
lid, and ingredient cap after each
use. Remove any remaining contents
from the blender jar. Fill the blender
jar with 2 cups of warm water and
1 drop of liquid detergent. Place the
lid on the blender jar, and make sure
the blender jar is fully in place on the
blender base.
CARE AND CLEANING
CLEANING THE BLENDER AND ACCESSORIES
Clean the Blender thoroughly after every use.
NOTE: To avoid damaging the Blender, do not immerse the blender base
or cord in water. To avoid scratching the Blender, do not use abrasive cleansers
or scouring pads.
10 | CARE AND CLEANING
CARE AND CLEANING
SANITIZING THE BLENDER
1. Remove any remaining contents from the blender jar.
2. Prepare a 200 ppm sodium hypochlorite solution* using 1.75 L of hot water in the
blender jar. Place the lid on the blender jar, and make sure the blender jar is fully in
place on the blender base.
3. Run the Blender on the High Speed setting for 35 seconds. Flip the START/STOP
toggle switch up or down to start the Blender.
4. Turn off the Blender and let the sanitizing mix sit in the blender jar for an
additional 2 minutes.
5. Pour out the sanitizing solution mix. Do not rinse the blender jar.
6. Place the lid on the blender jar. Make sure the empty blender jar is fully in place on
the blender base. Run the empty Blender for an additional 10 seconds. Do not rinse
the jar after sanitizing.
7. Allow the blender jar to air dry.
*To prepare a 200 ppm sodium hypochlorite solution: use 6.67 mL household bleach (with a 5.25% sodium
hypochlorite concentration) in 1.75 L of hot water.
3
Rotate the control dial to 30 seconds.
Flip the START/STOP toggle switch
up or down. When the timer finishes,
pour out the soapy water, and rinse
the blender jar with warm water.
4
Wash the blender jar, jar pad, lid, Flex
Edge tamper, and ingredient cap by
hand with a damp cloth and warm
soapy water; rinse with warm water
and dry with a soft cloth.
Indice
Lingue:
Altri manuali KitchenAid Miscelatore
KitchenAid
KitchenAid KSBC1B2 Manuale utente
KitchenAid
KitchenAid KSB1570SL0 Manuale utente
KitchenAid
KitchenAid KSB60 series Manuale utente
KitchenAid
KitchenAid 5KHB2570 Manuale utente
KitchenAid
KitchenAid KSB1575 Manuale utente
KitchenAid
KitchenAid 5KSB1320 Manuale utente
KitchenAid
KitchenAid 5KHB2571 Manuale utente
KitchenAid
KitchenAid KSB1575 Manuale utente
KitchenAid
KitchenAid Artisan Power Plus 5KSB8270 Manuale utente
KitchenAid
KitchenAid KSB5000 Manuale utente
KitchenAid
KitchenAid 5KHBL1321 Manuale utente
KitchenAid
KitchenAid KSB13 Series Manuale utente
KitchenAid
KitchenAid Pro Line KSB8270 Manuale utente
KitchenAid
KitchenAid 5KSB40 Series Manuale utente
KitchenAid
KitchenAid 5KSB13 A Series Manuale utente
KitchenAid
KitchenAid KSB7068 Manuale utente
KitchenAid
KitchenAid Pro Line KSB8270 Manuale utente
KitchenAid
KitchenAid 5KSB5553 Manuale utente
KitchenAid
KitchenAid PRO Line KPCB348 Manuale tecnico
KitchenAid
KitchenAid KSB560BW0 Manuale utente
