KitchenAid KFP1317 Manuale utente
Food Processor
KFP1317
KFP1318
KFP1319
W11462548A.indb 1W11462548A.indb 1 10/14/2020 12:23:13 PM10/14/2020 12:23:13 PM
2
PARTS AND FEATURES
1Heavy-Duty Base
2Power Cord and Cord Storage
(not shown)
3Drive Pin
413-Cup (3.1 L) Work Bowl
5Handle Hinge
6Lid Hinge
7Slicing Knob
8Work Bowl Cover with 3-in-1 Feed
Tube
9Lid Latch
10 3-in-1 Food Pusher
11 Refrigerator Lid
12 Externally Adjustable Slicing Disc
(thin to thick)
13 Reversible Fine/Medium Shredding
Disc
14 Multipurpose Stainless Steel Blade
15 Dough Blade
16 Drive Adapter (Upper)
17 Drive Adapter (Lower)
1
4
7
3
10
9
6
5
8
2
11
12
13
14
15
16
17
W11462548A.indb 2W11462548A.indb 2 10/14/2020 12:23:14 PM10/14/2020 12:23:14 PM
ENGLISH
3
PARTS AND FEATURES
18 Dicing Kit Cover
19 Dicing Blade
20 Dicing Kit Base
21 Dicing Kit Clean Out Tool
22 Storage Caddy
18
20
19
12
22
17
16
21
15
13
14
ACCESSORY GUIDE
Accessory Included with Model
KFP1319 KFP1318 KFP1317
External Adjustable Slice
• • •
Storage Caddy
• • •
Wide Mouth Opening • • •
3-in-1 Feed Tube • • •
Multipurpose Blade • • •
Dough Blade • •
Thin and Medium Shred • •
Thin Shred •
Storage Lid •
Dicing Kit •
W11462548A.indb 3W11462548A.indb 3 10/14/2020 12:23:14 PM10/14/2020 12:23:14 PM
4
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always
be followed, including the following:
1. Read all instructions.
2. To protect against risk of electrical shock, do not put Food Processor in water
or other liquid.
3. This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they are closely supervised and instructed concerning use
of the appliance by a person responsible for their safety. Close supervision is
necessary when any appliance is used by or near children. Children should be
supervised to ensure that they do not play with appliance.
4. Turn the appliance OFF, then unplug from the outlet when not in use, before
assembling, disassembling parts and before cleaning. To unplug, grasp the
plug and pull from the outlet. Never pull from the Power Cord.
5. Avoid contacting moving parts.
6. Do not operate any appliance with a damaged cord or plug or after the
appliance malfunctions, or is dropped or damaged in any manner. Contact the
manufacturer at their customer service telephone number for information on
examination, repair, or adjustment.
7. The use of attachments not recommended or sold by KitchenAid may cause
re, electric shock, or injury.
8. Do not use outdoors.
9. Do not let cord hang over edge of table or counter.
10. Keep hands and utensils away from moving Blades or discs while processing
food to reduce the risk of severe injury to persons or damage to the Food
Processor. A scraper may be used but must be used only when the Food
Processor is not running.
PRODUCT SAFETY
W11462548A.indb 4W11462548A.indb 4 10/14/2020 12:23:15 PM10/14/2020 12:23:15 PM
ENGLISH
5
11. Blades are sharp. Handle carefully.
12. To reduce the risk of injury, never place cutting Blade or discs on Base without
rst putting bowl properly in place.
13. Be certain Cover is securely locked in place before operating appliance.
14. Never feed food by hand. Always use the Food Pusher.
15. Do not attempt to defeat the Cover interlock mechanism.
16. Do not ll the bowl above the marked maximum ll line (or rated capacity) to
avoid risk of injury due to damage to the Cover or bowl.
SAVE THESE INSTRUCTIONS
PRODUCT SAFETY
ELECTRICAL REQUIREMENTS
This product is designed for household use only.
Voltage: 120 VAC
Frequency: 60 Hz
NOTE: This Food Processor is equipped with a polarized plug (one Blade is wider than
the other). To reduce the risk of electrical shock, this plug will fit in a polarized outlet only
one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician. Do not modify the plug in any way.
W11462548A.indb 5W11462548A.indb 5 10/14/2020 12:23:15 PM10/14/2020 12:23:15 PM
6
ACCESSORIES SELECTION GUIDE
Action Setting Food Accessory
Chop Low or Pulse
Cheese
Chocolate
Fruits
Fresh herbs
Nuts
Tofu
Vegetables Multipurpose Stainless
Steel Blade
Mince or Purée High or Pulse
Mix Low
Pasta Sauce
Pesto
Salsa
Sauces
Batters
Slice
(thin to thick)
Low
Fruit (soft)
Potatoes
Tomatoes
Vegetables (soft) Externally Adjustable
Slicing Disc
High
Cheese
Chocolate
Fruit (hard)
Vegetables (hard)
Shred
(fine to medium)
Low Potatoes
Vegetables (soft)
Reversible Fine/Medium
Shredding Disc
High
Cabbage
Cheese
Chocolate
Fruits (hard)
Vegetables (hard)
Dice Low
Potatoes
Vegetables
Fruit
Cheese
Dicing Kit
Knead Low Yeast
Dough Dough Blade
FOR DETAILED INFORMATION ON USING THE FOOD PROCESSOR
Visit www.kitchenaid.com/quickstart for additional instructions with videos, inspiring
recipes, and tips on how to use your Food Processor.
W11462548A.indb 6W11462548A.indb 6 10/14/2020 12:23:15 PM10/14/2020 12:23:15 PM
ENGLISH
7
Before first use
Before using your Food Processor for the first time, wash all parts and accessories either
by hand or in the dishwasher (see “Care and Cleaning” section).
NOTE: Your Food Processor is designed so that all accessories may be stored inside the
Work Bowl.
Lift up the Lid Latch to unlock the Cover.
Tilt the Work Bowl Cover back and lift it
straight up so that the Lid Hinge pulls out
of the Handle Hinge.
Remove all parts and accessories from
the Work Bowl, and lift the Food Pusher
out of the Feed Tube.
Place the Work Bowl on the Base, aligning
the Handle with the raised button on the
right side of the Base. The bowl will click
into place and should be flush against the
Base when properly aligned.
Place the Drive Adapter in the Work
Bowl, lowering it onto the Drive Pin.
PRODUCT ASSEMBLY
1
3
2
4
IMPORTANT: Place the Food Processor on a dry, level countertop with the controls
facing forward. Do not plug in the Food Processor until it is completely assembled.
W11462548A.indb 7W11462548A.indb 7 10/14/2020 12:23:16 PM10/14/2020 12:23:16 PM
8
PRODUCT ASSEMBLY
NOTE: For ease of assembly, install the desired Blade or Disc before attaching the Work
Bowl Cover.
NOTE: Your Food Processor will not operate unless the Work Bowl Cover is fully closed,
the large Food Pusher is in place, and the Work Bowl is properly seated on the Base.
To attach the Work Bowl Cover, hook the
Lid Hinge into the Handle Hinge on the
Work Bowl and close the Cover.
Once the Work Bowl Cover is closed, the
Lid Latch will lock in position.
5 6
INSTALLING THE MULTIPURPOSE BLADE OR DOUGH BLADE
Install the Lower Drive Adapter onto the
Upper Drive Adapter. Place the Blade on
the Drive Adapter. Rotate the Blade so it
falls down to the Base of the Adapter.
Install the Work Bowl Cover, and be sure
the Lid Latch is pushed down to the
locked position.
12
W11462548A.indb 8W11462548A.indb 8 10/14/2020 12:23:16 PM10/14/2020 12:23:16 PM
ENGLISH
9
PRODUCT ASSEMBLY
TIP: You may need to adjust the Drive Adapter with a slight turn on the power shaft until
it drops into place. For easiest installation, make sure the Adjustment Knob is in the “0”
position.
INSTALLING THE EXTERNALLY ADJUSTABLE SLICING DISC
ADJUSTING THE SLICING THICKNESS
Hold the Slicing Disc by the finger grips
and lower it onto the Drive Adapter.
To attach the Work Bowl Cover, hook the
Lid Hinge into the Handle Hinge on the
Work Bowl and close the Cover.
Once the Work Bowl Cover is closed, the
Lid Latch will lock in position.
NOTE: The Knob only works with
the Externally Adjustable Slicing Disc.
Changing thickness settings with other
discs or Blades installed will have no effect
on operation.
NOTE: Your Food Processor will not
operate unless the Work Bowl Cover is
fully closed and the Work Bowl is properly
seated on the Base.
Set the desired thickness by moving the
Knob to the left for thinner slices and to
the right for thicker slices.
Thinner Thicker
1 2
3
1
W11462548A.indb 9W11462548A.indb 9 10/14/2020 12:23:17 PM10/14/2020 12:23:17 PM
10
INSTALLING THE DICING KIT
With the Work Bowl removed from the
Base, place Dicing Kit Base, Blade, and
Cover in the Work Bowl.
Align Dicing Kit Cover with wide mouth
feed shoot.
1
2
Place the Work Bowl Cover on the Work
Bowl. Take small and/or medium Feed
Tube. Insert food to dice.
After dicing, remove the Work Bowl
Cover, Dicing Kit Cover and Dicing Blade,
then insert the Dicing Kit Clean Out Tool
into the Dicing Kit Base and push any
extra food through the grid.
1 2
3 4
PRODUCT ASSEMBLY
PRODUCT USAGE
Before operating the Food Processor, be
sure the Work Bowl, Blades/Disc, and Work
Bowl Cover are properly assembled on the
Base (see the “Product Assembly” section).
W11462548A.indb 10W11462548A.indb 10 10/14/2020 12:23:19 PM10/14/2020 12:23:19 PM
Altri manuali per KFP1317
1
Questo manuale è adatto per i seguenti modelli
2
Indice
Lingue:
Altri manuali KitchenAid Robot da cucina
KitchenAid
KitchenAid KFP710 Guida rapida
KitchenAid
KitchenAid Chef's Chopper KFC3100 Manuale utente
KitchenAid
KitchenAid KSM1FPA Manuale utente
KitchenAid
KitchenAid 5KFP0933AAC Manuale utente
KitchenAid
KitchenAid KFC3511 Manuale utente
KitchenAid
KitchenAid KFCR500 Manuale utente
KitchenAid
KitchenAid 5KFP0925 Manuale utente
KitchenAid
KitchenAid KFPM770NK0 Manuale utente
KitchenAid
KitchenAid KFP0922WH0 Manuale utente
KitchenAid
KitchenAid KFP0919Q Manuale utente
KitchenAid
KitchenAid KFP0921 Manuale utente
KitchenAid
KitchenAid KFP1330 Manuale utente
KitchenAid
KitchenAid 9 Cup Manuale utente
KitchenAid
KitchenAid 5KFP1644 Manuale utente
KitchenAid
KitchenAid 5KFC0516 Manuale utente
KitchenAid
KitchenAid KFCB519 Manuale utente
KitchenAid
KitchenAid 5KFP1318 Series Manuale utente
KitchenAid
KitchenAid 4KFP720BU1 Manuale utente
KitchenAid
KitchenAid 9KFC0516 Manuale utente
KitchenAid
KitchenAid 5KFC3515 Manuale utente
