KitchenAid KEA25A Manuale utente
5KSM3311X
7KSM3311X
KEA25A
W10920194C.indb 1 5/10/2018 12:37:27 PM
2 | PARTS AND FEATURES
PARTS AND FEATURES
PARTS AND ACCESSORIES
Pouring shield*
Flex Edge
beater*
Wire whip
Dough hook
Speed control
*Accessory sold separately
Motor head
Attachment hub
Beater shaft
Flat
beater
Bowl
W10920194C.indb 2 5/10/2018 12:37:28 PM
ENGLISH
STAND MIXER SAFETY | 3
STAND MIXER SAFETY
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety
precautions should always be followed, including
the following:
1. Read all instructions. Misuse of appliance may result
in personal injury.
2. To protect against risk of electrical shock, do not put
Stand Mixer in water or other liquid.
3. This appliance is not intended for use by persons
(including children) with reduced physical, sensory, or
mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a
person responsible for their safety.
4. Unplug Stand Mixer from outlet when not in use,
before putting on or taking off parts and before
cleaning.
5. Avoid contacting moving parts. Keep hands, hair,
clothing, as well as spatulas and other utensils away
from beater during operation to reduce the risk of
injury to persons and/or damage to the Stand Mixer.
W10920194C.indb 3 5/10/2018 12:37:28 PM
4 | STAND MIXER SAFETY
STAND MIXER SAFETY
6. Do not operate Stand Mixer with a damaged cord
or plug or after the Stand Mixer malfunctions, or is
dropped, or damaged in any manner.
7. The use of attachments not recommended or sold by
KitchenAid may cause re, electrical shock or injury.
8. Do not use the Stand Mixer outdoors.
9. Do not let the cord hang over edge of table or counter.
10. Remove at beater, wire whip, or dough hook fro
Stand Mixer before washing.
11. Children should be supervised to ensure that they do
not play with the appliance.
12. If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent, or similarly
qualied persons in order to avoid a hazard.
13. Never leave the appliance unattended while it is in
operation.
14. To avoid product damage, do not use the Stand Mixer
bowls in areas of high heat such as an oven,
microwave, or on a stovetop.
15. Refer to the “Care and Cleaning” section for
instructions on cleaning the surfaces in contact with
food.
16. This appliance is intended to be used in household and
similar applications such as:
- staff kitchen areas in shops, ofces, or other working
environments;
- farmhouses;
- by clients in hotels, motels and other residential type
environments;
- bed and breakfast type environments.
SAVE THESE INSTRUCTIONS
W10920194C.indb 4 5/10/2018 12:37:28 PM
ENGLISH
STAND MIXER SAFETY | 5
STAND MIXER SAFETY
ELECTRICAL REQUIREMENTS
Electrical Shock Hazard
Plug into an earthed outlet.
Do not remove earth prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these
instructions can result in
death, fire, or electrical shock.
5KSM3311X
Voltage: 220-240 V~
Frequency: 50-60 Hz
Wattage: 250 W
7KSM3311X
Voltage: 127 V~
Frequency: 60 Hz
Wattage: 250 W
NOTE: The power rating for your
Stand Mixer is printed on the serial plate.
Do not use an extension cord. If the power
supply cord is too short, have a qualified
electrician or serviceman install an outlet
near the appliance.
The maximum rating is based on the
attachment that draws the greatest
load (power). Other recommended
attachments may draw significantly
less power.
*Accessory sold separately
W10920194C.indb 5 5/10/2018 12:37:28 PM
6 | USING THE STAND MIXER
USING THE STAND MIXER
SPEED CONTROL GUIDE
All speeds have the Soft Start feature, which automatically starts the Stand Mixer
at a lower speed to help avoid ingredient splash-out and “flour puff” at start-up,
then quickly increases to the selected speed for optimal performance.
SPEED ACCESSORY ACTION DESCRIPTION
½STIR For starting all mixing procedures, slow
stirring, combining, and mashing. Use to
add flour and dry ingredients to batter,
and to add liquids to dry ingredients.
Do not use Speed 1 to mix or knead
yeast doughs.
1
2SLOW MIXING For slow mixing, mashing, faster stirring.
Use to mix and knead yeast doughs,
heavy batters, and candies; start
mashing potatoes or other vegetables;
cut shortening into flour; mix thin or
splashy batters.
4MIXING,
BEATING For mixing semi-heavy batters, such
as cookies. Use to combine sugar and
shortening, and to add sugar to egg
whites for meringues. Medium speed
for cake mixes.
6BEATING,
CREAMING For medium-fast beating (creaming),
or whipping. Use to finish mixing cake,
doughnut, and other batters. High
speed for cake mixes.
8FAST BEATING,
WHIPPING For whipping cream, egg whites,
and boiled frostings.
10 FAST WHIPPING For whipping small amounts of cream,
or egg whites; for final whipping of
mashed potatoes.
NOTE: The speed control can be set between the speeds listed in the chart to obtain
speeds 1, 3, 5, 7, and 9 if a finer adjustment is required. Do not exceed Speed 2 when
preparing yeast doughs as this may cause damage to the Stand Mixer.
W10920194C.indb 6 5/10/2018 12:37:29 PM
ENGLISH
USING THE STAND MIXER | 7
USING THE STAND MIXER
ACCESSORY GUIDE
ACCESSORY USE TO MIX DESCRIPTION
FLAT BEATER
FLEX EDGE BEATER*
Normal
to heavy
mixtures
Cakes, creamed frostings, candies,
cookies, biscuits, pie pastry, meat loaf,
mashed potatoes
WIRE WHIP Mixtures
that need air
incorporated
Eggs, egg whites, heavy cream,
boiled frostings, sponge cakes,
mayonnaise
DOUGH HOOK Mixing and
kneading yeast
doughs
Breads, rolls, pizza dough, buns
ASSEMBLING THE STAND MIXER
1Check to be sure that the Stand
Mixer is unplugged, and the speed
control is turned to “0”. 2
Raise the motor head: Slide the
locking lever to the unlock position
and lift the motor head. Once lifted,
slide the locking lever to the lock
position to keep the motor head up.
NOTE: To move the speed control lever
with ease, lift slightly up as you move it
across the settings in either direction.
W10920194C.indb 7 5/10/2018 12:37:29 PM
8 | USING THE STAND MIXER
USING THE STAND MIXER
3
Attach the bowl: Place the bowl on
the bowl clamping plate and gently
turn it in a clockwise direction to
lock it into place.
4
Attach any accessory: Slip the
accessory onto the beater shaft and
press upward as far as possible. Turn
the accessory counterclockwise to
hook the accessory over the pin on
the shaft.
5
Lower the motor head: Slide the
locking lever to the unlock position
and guide the motor head down.
Make sure motor head is completely
down, then slide the locking lever
to the lock position. Before mixing,
test lock by attempting to raise the
motor head.
W10920194C.indb 8 5/10/2018 12:37:30 PM
ENGLISH
USING THE STAND MIXER | 9
USING THE STAND MIXER
IMPORTANT: Your Stand Mixer is adjusted at the factory so that the flat beater just
clears the bottom of the bowl. If, for any reason, the flat beater hits the bottom of
the bowl or is too far away from the bowl, you can easily adjust the clearance.
NOTE: When properly adjusted, the flat beater will not strike on the bottom or sides
of the bowl. If the flat beater or the wire whip is so close that it strikes the bottom of
the bowl, coating may wear off the beater or wires on the whip may wear.
(OPTIONAL) To adjust beater to
bowl clearance: Tilt the motor head
back; then turn the screw slightly
counterclockwise (left) to raise the
beater, or clockwise (right) to lower the
beater. Adjust the beater so that it just
clears the surface of the bowl. If you
overadjust the screw, the bowl lock
lever may not lock into place.
(OPTIONAL) Place the pouring shield*:
Slide the pouring shield* from the
front of the Stand Mixer over the
bowl until the pouring shield* is
centred. The bottom rim of the
pouring shield* fits inside of the bowl.
The pouring chute will be just to the
right of the attachment hub as you face
the Stand Mixer.
*Accessory sold separately
W10920194C.indb 9 5/10/2018 12:37:30 PM
10 | USING THE STAND MIXER
USING THE STAND MIXER
OPERATING THE STAND MIXER
NOTE: The Stand Mixer may warm up during use. Under heavy loads with extended
mixing time, the top of the unit may become hot. This is normal.
1
Plug the Stand Mixer into
a grounded outlet. Always set
the speed control lever on lowest
speed to start, then gradually
increase speed to avoid splashing
ingredients. See the “Speed control
guide” to select the best speed for
your recipe.
2
Do not scrape the bowl while the
Stand Mixer is operating. The bowl
and beaters are designed to provide
thorough mixing without frequent
scraping. Scraping the bowl once
or twice during mixing is usually
sufficient.
NOTE: To move the speed control lever
with ease, lift slightly up as you move it
across the settings in either direction.
Electrical Shock Hazard
Plug into an earthed outlet.
Do not remove earth prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these
instructions can result in
death, fire, or electrical shock.
W10920194C.indb 10 5/10/2018 12:37:30 PM
Questo manuale è adatto per i seguenti modelli
2
Indice
Lingue:
Altri manuali KitchenAid Miscelatore
KitchenAid
KitchenAid 5KHM9212 Manuale utente
KitchenAid
KitchenAid KG25H0XER5 Guida rapida
KitchenAid
KitchenAid 5KSM7990XEWH Manuale utente
KitchenAid
KitchenAid Mixer Guida rapida
KitchenAid
KitchenAid Professional 5 Plus Series Manuale utente
KitchenAid
KitchenAid KSM7591XESM Manuale utente
KitchenAid
KitchenAid 5KSM7580X Manuale utente
KitchenAid
KitchenAid KSM450BK0 Manuale utente
KitchenAid
KitchenAid 5KSM150PSP Series Manuale utente
KitchenAid
KitchenAid G Manuale operativo e di manutenzione
KitchenAid
KitchenAid KEC50AV Manuale utente
KitchenAid
KitchenAid KPM50 GR Manuale utente
KitchenAid
KitchenAid 5KSM7580X Manuale utente
KitchenAid
KitchenAid 9KSM95 Series Manuale utente
KitchenAid
KitchenAid KSM75WH1 Manuale utente
KitchenAid
KitchenAid 5KSM150PSABU0 Manuale utente
KitchenAid
KitchenAid 5KPM5EER4 Manuale utente
KitchenAid
KitchenAid KSM7586PCA Manuale utente
KitchenAid
KitchenAid KSM150PSAC1 Manuale utente
KitchenAid
KitchenAid Bowl-Lift Mixer Manuale utente
