KJM JC20 Manuale utente

JC20

Universal Jump Starter Charger

Operation Guide

KJM’s line of 12V lithium-polymer multi-function jump

starter/chargers work with all vehicles powered by a

12V lead-acid battery. KJM jump starters/chargers in-

clude connectors to charge cellphones, computers and

tablets. Also included is a high intensity LED ﬂashlight

with SOS Strobe and hazard modes.

Contents

THANK YOU FOR PURCHASING

A KJM PRODUCT

KJM is dedicated to providing the ﬁnest in

Marine and Outdoor equipment. Our products

are built to withstand the harshest environ-

ments, and designed by people with over three

decades of industry experience.

Warning 12VDC vehicles ONLY! DO NOT use on

6V, 24V or 32V systems.

1Features 02

2 Supplied with 02

3Connections 03

4 LED Charge Indicator 04

5Charging 04

6 Jump Starting 05

7 Charging a cell phone 08

8 Multi-mode Flashlight 08

9Speciﬁcations 09

10 Warranty & Contact 10

1. Features › 2. Supplied with

110VAC Charger 12VDC Car Charger

Jumper Cables

JC20

Multi-adapter

Cable

19V Power

Cable

19V Power

Adapters

› Two (1A and 2A) USB Outputs for cell phones,

tablets and other 5V devices

› One 19VDC 3.5A Output for Laptops

with eight adapters

› One 12VDC 10A Output

› LED Flashlight with SOS Alert, Hazard Strobe,

High and Low modes

› LED battery capacity/charging Indicator

1. FEATURES

2. SUPPLIED WITH

3. Connections

3. CONNECTIONS

aLED Charge Indicator

bJumper Cable Port

c5V 1A USB Output

d5V 2A USB Output

eLED Flashlight

f110VAC/12VDC Charger Input

g12V 10A Output

h19V 3.5A Output

iFunction Switch

4. LED Charge Indicator › 5. Charging

Press Switch to check the JC20 battery condition

45% 2 LEDs 85% 3 LEDs 100% 4 LEDs

0% 0 LEDs 1% 4 Blinking 25% 1 LED

4. LED CHARGE INDICATOR

When charging the Jump Starter, the LED Charge

Indicators located on the top of the device will ash.

Charging is complete when all 4 LEDs are illuminat-

ed. Charge only at ambient temperatures between

-20° and 60°.

1.Plug the home adapter into an AC outlet or plug the

car adapter into the car’s cigarette lighter socket

2. Connect the plug on the other end of the adapter

to the Input 15V 1A port

3.Typical charge time for a discharged battery is 8hrs

5. CHARGING

6. Jump Starting

6. JUMP STARTING

Warnings

› Never connect the Red and Black jumper

cable clamps together

› Do not allow the device to become wet

or immersed in liquids

› Do not operate in explosive atmospheres,

such as near flammable liquids or gases

› Make sure the jumper cable is tightly connected to the

jump start socket before jump starting the vehicle

› Do not disassemble JC20 as there are no

serviceable components inside

› Shock hazard, keep away from children

› Jump starting an engine should never be tried for more

than 15 sec. at a time or the jumper cables will over-

heat. If the engine does not start within 15 sec. there

may be another problem preventing it from starting

› Do not use the JC20 where there are flammable

fumes or gases, such as an inadequately vented

bilge of a boat

› Prop. 65 Warning: This product contains a chemical

known to the State of California to cause cancer and

birth defects or other reproductive harm

6. Jump Starting Continued

Before you begin

› Turn off all systems in your vehicle (lights, air

conditioner, heater, stereo, etc.) to ensure the KJM

Jump Starter will provide maximum current to

start the vehicle

› Properly clean the battery terminals if necessary

› Press the Function Switch and confirm the battery

charge shows at least 3 LEDs

Jumper cable status LEDs

The Jumper cable has two status LEDs, Red and Green:

› Green and Red blinking: Ready to connect

to the vehicle battery

› Green on: Connection correct

› Red on: Connection reversed or short-circuit

› No LEDs indicate the Jump Starter's battery is low,

or the jumper cables are not properly connected

6. Jump Starting Continued

Jump start vehicle

instructions

1.Connect the JC20

red jumper cable to

the Positive (+) and

black jumper cable to

the Negative (-) poles

of the 12V battery

2. Connect the jumper

cable plug to the JC20

3.Conrm the Green

LED on the jumper

cable is illuminated

4.Turn the key to start

the vehicle

5.Once the vehicle

starts, remove the

jumper cable plug

from the JC20

one

four

two

five

three

7. Charging a cell phone or tablet › 8. Multi-mode Flashlight

7. CHARGING A CELL PHONE OR TABLET

Charging or suppling 12/16 or 19V to electronics

1.Plug the black 19V power cable (see connection

section) to the JC20 Output

2. Select appropriate adapter and connect

to the black double ended cable, then

connect to Laptop

3.Press the Function Switch to start

powering the device

8. MULTI-MODE FLASHLIGHT

How to use the multi-mode ashlight

1.Press and hold the Function Switch button until

the LED light turns on

2. To selec t modes, momentarily press the Func-

tion Switch button

3.Short presses will select; Bright, Dim, Hazard

Strobe, SOS signal and OFF

9. Speciﬁcations

Performance specications are nominal and

unless otherwise indicated, are subject to change

without notice. At the end of their useful life,

please discard the appliance with due care for

our environment.*

BATTERY CAPACITY 20,000MAH (66.6WH)

SIZE 8.1” X 3.1” X 1.3” (206 X 79 X 33MM)

WEIGHT 14.6 OZ

CHARGE INPUT DC15V 1A

OUTPUTS USB 5V: 1A AND 2A - TABLET PC

AND CELL PHONE

12V: JUMP START (ENGINE START),

12V: 10A / 19V/3.5A - LAPTOP

STARTING CURRENT 300A

PEAK CURRENT 600A

OPERATION TEMP -20°~60° / -4°~140°

FULL CHARGING TIME 8 HOURS

CYCLE TIME >3000 TIMES

9. SPECIFICATIONS

* Seriously, we mean it!

Indice

Manuali Avviamento remoto popolari di altre marche

AstroStart

AstroStart 803U Manuale utente

Durite

Durite 0-649-20 Manuale

EINHELL

EINHELL BT-PS 1000 Manuale

Linear

Linear ACCESS AK-21 Specifiche tecniche

Soundstream

Soundstream TARANTULA RS.2 Manuale utente

Jaycar Electronics

Jaycar Electronics MB3752 Manuale utente

Ultra Start

Ultra Start 72 Series Manuale utente

ADS

ADS FLASHLOGIC FLRSVW1 Manuale utente

Selecta

Selecta JS012 Manuale utente

Black Widow Security

Black Widow Security BW RAS 400 Manuale utente

Vector

Vector Power City DK080706 Supplemento

Code Alarm

Code Alarm CA-535 Manuale utente

Ozito

Ozito OJS-800 Manuale utente

Profi-Partner

Profi-Partner 46387 Manuale utente

EZ STARTER

EZ STARTER EZ-45 Manuale utente

Viper

Viper 4204 Manuale utente

Essex Electronics

Essex Electronics KE-1701 Manuale utente

EINHELL

EINHELL EGS 3600 Manuale