Fig. 2: Detaching the controller to reach the Emergency unlock button
Accessing Device Settings
To modify your device’s settings you will need to connect to it from another Wi-Fi enabled device
such as a smartphone, tablet or computer. Complete the following steps:
1. Press and hold the ‘Settings‘ ( ) button (see Fig. 1) on the back of the Klevio device for at
least one second.
2. At this point, the indicator lights on the front of the device will flash orange and blue -
once they go pink this means Klevio has set up a Wi-Fi hotspot called ‘KlevioHotspot’
which you can connect to from your phone/tablet/computer with the password
‘lifeunlocked’.
3. Once connected to the Klevio network, open a browser and navigate to the web page
www.klevio.zone where you can edit your device settings.
Setting up Wi-Fi
Klevio Opener needs to be connected to Wi-Fi or 4G in order to work. Additionally, if any changes
occur on the Wi-Fi network or the router gets replaced, you will need to manually adjust the Wi-Fi
settings on the device.
To set up Wi-Fi on your device, access Device Settings as described in the 'Accessing device
Settings' section.
Opener-IM:1.0-202205-CS:v2.8-CT:v2.4a
Klevio.com
8/38
