The tuner uses a rechargeable lithium-ion
batttery (included). To charge the battery, use
the included micro-USB cable to connect with
your smartphone adapter, your computer or
portable power bank to recharge.
The tuning indicator lights will all flash while
tuner is being charged. Once the tuner is
complete an "F" will appear inside the tuner
ring to indicate the battery is full. If the
battery is low an "L" will appear.
CHARGING THE BATTERY
DISPLAY & BUTTON FUNCTIONS
A - A4 Calibration Indicator
B - Tuning Mode Indicator
C - Transposition Setting Indicator
D - Note Name Indicator
MODE Button
POWER/KEY Button
A4 Button/Octave mode
OPERATING INSTRUCTIONS
1. Press and hold the POWER/KEY button
for 1second. The power will turn on/off
each time you press and hold this button.
2. Play a single note on your instrument.
The Note Name Indicator Dwill display
the name of the note that’s closest to the
pitch detected. The yellow indicators to
the left of the note will light up if the
pitch is too low or flat. The red indicators
to the right of the note will light up if the
pitch is too high or sharp. Adjust the
tuning so that the green circle around the
note lights up (along with the yellow
indicators to the left), which means the
note you’re playing is perfectly in tune.
A4 REFERENCE PITCH CALIBRATION
To set the A4 calibration, press and hold
the MODE button for 2 seconds. Display
indicators A, B, and Cwill begin to flash.
Each time you press the A4 button , the
calibration value (reference pitch) will
increase in 1 Hz steps, with the current
value shown by the A4 Calibration
Indicator A. This setting range is between
430 and 450 Hz.
Dear Musician,
Thank you for purchasing the Rechargeable
Ubertuner-MAX, and welcome to the KLIQ!
To register your product warranty, please visit
www.kliqmusicgear.com/warranty. To get the
most out of your new tuner, please carefully read
this manual prior to first use, and keep it for later
reference. Should you ever need anything, please
call us at 800.316.9651. We are always glad to
help!
TRANSPOSITION SETTINGS
This function is for tuning a transposing
instrument. To select the appropriate
transposition setting for your instrument,
press and hold the MODE button for 2
seconds. Display indicators A, B, and C
will begin to flash. Each time you press
the KEY button the setting will cycle
between C, B♭, E♭, and F under
Chromatic Mode C , and between C and D
under Ukulele Mode U, with the current
value shown by the Transposition Setting
Indicator C.
PAGE 1
TUNING MODES
To change the tuning mode, press and
hold the MODE Button for 2 seconds.
Display indicators A, B, and Cwill begin
to flash. Each time you press the MODE
button , the tuning mode will change,
with the current mode shown by the
Tuning Mode Indicator B. The various
tuning modes are Chromatic Mode C ,
Guitar Mode G , Bass Mode B , Violin
Mode Vand Ukulele Mode U .
OCATAVE MODE
To change to the octave mode, (make
sure the tuner is in the Chromatic Mode
C), then press and hold the A4 button
until the Octave/String Indicator number
to the left of the note indicator begins to
blink. Press the button again to change
from 0-Standard mode to 1-Octave mode.
UBERTUNER-MAX EDITION
