Knikmops KM 80 Manuale utente

User Manual

Intrepid Wheel Loaders

Introduction

This document or parts thereof may not be reproduced, copied, distributed or stored in a search

system, or sent in any form or method, electronic or otherwise, without written permission from

Miniloaders.com

Specifications and illustrations can be changed without prior notice. Miniloaders.com cannot be

held responsible for any change or typing error. Details and values are not binding.

Miniloaders.com cannot be held liable for damage suffered as a result of reliance on the

information provided in this document or the use of products, processes or equipment to which

this document refers.

Introduction

Preface

Make sure that the Intrepid wheel loader is always accompanied by this operator manual.

Miniloaders.com is not responsible for damage and indirect damage caused by operator error,

lack of (skilled) maintenance or any other use other than described in this manual.

Miniloaders.com cannot be held liable for any damages resulting from unauthorized

modifications or additions to the Intrepid wheel loader without the written consent of

Miniloaders.com

Miniloaders.com continually strives to improve her products and services. We therefore reserve

the right to change the specifications in this operator manual at any time without prior notice. The

content of this manual has been prepared with the utmost care. Nevertheless, some information

may be incomplete, incorrect or may become outdated in time.

TO THE FULLEST EXTENT PERMISSIBLE BY LAW, MINILOADERS.COM MAKES NO

REPRESENTATIONS OR WARRANTIES OF ANY KIND, WHETHER EXPRESS OR IMPLIED,

FOR THE CURRENCY, ACCURACY OR COMPLETNESS OF ANY INFORMATION, AS

DEFINED ABOVE.

FURTHERMORE, MINILOADERS.COM MAKES NO REPRESENTATIONS OR WARRANTIES

IN CONNECTION TO ITS PRODUCTS AND/OR SERVICES, INCLUDING WARRANTIES

ABOUT ITS SERVICES’ AND PRODUCTS’ MERCHANTABILITY OR FITNESS FOR A

PARTICULAR PURPOSE, UNLESS EXPLICITLY MADE AND PROVIDED BY GEBR. GEENS

N.V. IN WRITING TO THE PURCHASER OF THE SERVICES AND/OR PRODUCTS.

Introduction

Use of the operator manual

This operator manual provides detailed operating procedures for safe, effective and proper

machine use. The manual includes chapters about safe operation, machine specification,

maintenance and troubleshooting information.

Improper operation, inspection and maintenance of the machine can result in injury or death.

Read and understand the contents of this manual completely and become familiar with the

machine before operation. Contact your authorized dealer with any questions about information in

this manual or if you need extra manuals or manuals in other languages.

This manual is considered a permanent part of the machine and should be with the machine at all

times. Replace this manual promptly if it becomes damaged, lost, or stolen.

Change of ownership

If the machine is resold, include this operator manual as part of the sale.

Please provide your dealer or Miniloaders.com with the name of the current owner and any new

address, along with the machine model and serial numbers. This makes sure that the registered

owner receives any updated information and can be notified directly in case of an important

product issue, such as a safety update program.

Warning: Do not remove this operator manual from this machine.

Failure to obey safety, operating and maintenance instructions can result in serious injury to the

operator or bystanders, poor operation and costly breakdowns of the machine.

If you have any questions on proper operation, adjustment or maintenance of this machine,

contact your dealer before starting or continuing operation.

Introduction

Contents

1 Introduction .................................................................................................................................. 7

About this manual ...................................................................................................... 7

Revision history ......................................................................................................... 7

Related documents .................................................................................................... 7

Safety symbols in the document ................................................................................ 8

Contact details for North America .............................................................................. 8

2 Safety .......................................................................................................................................... 9

Intended use .............................................................................................................. 9

Safety instructions ..................................................................................................... 9

Using the machine ...................................................................................... 9

Personnel .................................................................................................. 10

Organizational measures .......................................................................... 10

Safety instructions during certain activities ............................................... 10

Instructions concerning certain risks ......................................................... 11

Instructions concerning hydraulic parts ..................................................... 11

Safety symbols on the machine ............................................................................... 12

3 Description ................................................................................................................................. 15

Overview .................................................................................................................. 15

Type plate ................................................................................................................ 16

Dashboard ............................................................................................................... 16

Hydraulic control ...................................................................................................... 17

Mounting plate ......................................................................................................... 18

Sticker for hydraulic control and boom level functions ............................................ 19

Driver’s seat ............................................................................................................. 20

Operating principle: driving the wheels .................................................................... 20

4 Daily use .................................................................................................................................... 21

Starting .................................................................................................................... 21

Stop ......................................................................................................................... 22

Driving ..................................................................................................................... 22

Driving: safety instructions ........................................................................ 22

Driving ....................................................................................................... 23

Operating the boom ................................................................................................. 23

Attaching an interchangeable accessory ................................................................. 24

Detaching an interchangeable accessory ................................................................ 25

Operating the interchangeable accessory ............................................................... 25

Refueling ................................................................................................................. 26

Engaging and disengaging the differential .............................................................. 26

Introduction

Installing counterweights ......................................................................................... 27

Mounting and removing the jib lock ......................................................................... 28

Preheating ............................................................................................................... 28

Transport and storage ............................................................................................. 29

Transport: safety instructions .................................................................... 29

Driving on the means of transport ............................................................. 29

Hoisting the machine ................................................................................ 29

Storage ..................................................................................................... 29

5 Maintenance .............................................................................................................................. 30

Daily maintenance ................................................................................................... 30

Maintenance table: maintenance with the machine switched off ............................ 30

Maintenance table: Maintenance with the machine switched on ............................ 31

Periodic maintenance (qualified service technician) ................................................ 32

Opening the engine compartment ........................................................................... 33

Clean the pre-filter ................................................................................................... 33

Check the fan belt tension ....................................................................................... 34

Checking the parking brake ..................................................................................... 34

Lubricate the hinge points ....................................................................................... 34

Check/top up the engine oil level ............................................................................. 36

Check/top up the coolant fluid level ......................................................................... 36

Check and top up the hydraulic fluid level ............................................................... 37

Replace the air filter ................................................................................................. 38

Replacing the hydraulic fluid filters .......................................................................... 39

Other lubrication points ............................................................................................ 39

6 Troubleshooting ......................................................................................................................... 41

Daily maintenance ................................................................................................... 41

Troubleshooting table .............................................................................................. 41

7 Technical data ........................................................................................................................... 43

Consumables ........................................................................................................... 43

Reference figure: dimensions .................................................................................. 44

Reference figure: maximum load ............................................................................. 45

KM100TE ................................................................................................................. 45

Introduction

1 Introduction

About this manual

The Intrepid wheel loader is referred to in the rest of this manual by the term “machine”.

This machine is intended for the following target groups:

• Machine operator

• Personnel that carry out daily maintenance on the machine

The manual is applicable for these machine types:

• KM80

• KM85

• KM100

• KM100TE

• KM120

• KM120TE

This manual was originally written in Dutch. All other language versions are translations. If

there is any doubt about the correctness of a translation, the Dutch version takes

precedence.

It is not always possible to show a detailed image of each individual part of the machine.

Therefore, the images in this document can only show a standard layout. The images are

for instruction purposes only.

Revision history

Date

Revisio

Comments

November 2017

001

First version

August 2018

002

Adjustment of the hours for maintenance

Adjustment of contact details to Miniloaders.com

February 2019

002

Addition of Bosch Rexroth joystick

Small changes

Related documents

Document type

Document number

Target group

User Manual

34 – X – Y

• Operator

• Personnel that carry out daily

maintenance on the machine

Diesel engine user manual

16622-8916-8

Qualified maintenance technician

• X: version number of the document

• Y: release date of the document

Introduction

Safety symbols in the document

Safety symbol

Purpose

Description

Warning

“Warning” means that injury or death is possible if

you do not obey the instructions.

Caution

“Caution” means that damage to the equipment is

possible if you do not obey the instructions.

Note

“Note” is used to provide additional information.

Contact details for North America

Miniloaders.com

801 East Second Street

79045 Hereford, TX

Tel. 806-376-0166

E-mail: info@miniloaders.com

Safety

2 Safety

Intended use

The machine is made for carrying out excavation and transport work in road construction,

landscaping and related sectors. By connecting and disconnecting and disconnecting

interchangeable accessories, the machine can be used for different applications.

Use only interchangeable accessories intended for your machine and that have been

approved by the manufacturer.

Safety instructions

Using the machine

• Read the manual carefully before using the machine.

• Carry out the procedures in the order shown and complete the procedures.

• Keep this manual with the machine. If there is no manual, report it to your employer.

• Replace a damaged safety cabin immediately.

• If there is a fault or damage to the machine, stop the machine and report it to your

employer. Make sure that the fault is resolved immediately.

• Do not modify the machine unless approved in writing by the manufacturer in advance.

• If the machine is fitted with an interchangeable accessory for which a periodic

inspection is required, proof of this inspection must accompany the machine at all

times.

• Use only interchangeable accessories from the manufacturer.

When using other interchangeable accessories, the manufacturer accepts no

responsibility for the use of the entire combination.

• When using an interchangeable accessory, subtract the weight of the interchangeable

accessory from the load values.

• Use the machine and the interchangeable accessory only as intended. If you want to

use the machine for another application, please contact the manufacturer.

• The manufacturer is not responsible for damage caused by improper use of the

machine or the interchangeable accessory.

• When replacing parts: always contact the manufacturer and only use parts that have

been approved by the manufacturer.

• Use personal protective equipment: safety clothing, safety footwear.

• Use hearing protection. The noise level is more than 93 dB(A).

• Keep the driver’s seat, pedals and steps clean.

• Store materials and tools when you are not using them.

• Loads:

• Position loads only as indicated in this document.

• Do not exceed the maximum loading. For the specifications, see chapter 7.

• Avoid asymmetrical distributions of the load.

• Counterweights:

• Only counterweights and the counterweight frame from the manufacturer may be

placed on the rear of the machine.

• Persons on the back of the machine are not allowed as counterweight.

• Ensure that the interchangeable accessory parts are properly secured at all times.

• Driving on a slope:

• Driving parallel to the slope is only permitted if the following conditions are met:

• Maximum slope 10°

• Boom retracted and as close as possible to the ground

Safety

• Maximum speed 2 mph

• Driving on slopes greater than 10° is only permitted if you drive straight up or

straight down, i.e. at right angles of the slope.

• Driving with loads on a slope is only permitted if the following conditions are met:

• Maximum slope 10°

• Boom retracted and as low as possible close to the ground

• Maximum speed 2 mph

• Driving with loads on a slope is only permitted if the following conditions are met:

• Maximum slope 10°

• Load as close as possible to the ground

• Maximum speed 2 mph

• If the machine overturns:

• Keep your seat belt on.

• Stay on the machine.

• Turn off the machine completely.

• Always use the locking pin or locking pins to lock the interchangeable accessories and

also follow the instructions of the interchangeable accessory.

• Obey the local labor and safety laws and environmental regulations.

Personnel

• The machine may only be used, maintained and repaired by personnel trained by the

manufacturer or by the importer.

• The personnel must:

• be 18 or older;

• be physically and mentally healthy;

• have the relevant knowledge and skills.

• Personnel in training may only use the machine under the supervision of trained

personnel.

Organizational measures

• Do not wear loose clothing or jewelry. Tie up long hair.

• Ensure that all warning symbols on the machine are readable. Replace unreadable

warning symbols immediately.

• Hoisting and lifting tools such as chains, plastic hoisting belts and steel straps must:

• be sufficiently strong, correctly dimensioned and in good condition;

• comply with local labor and safety laws.

• Workplace environment:

• The machine is suitable for driving on the public highway, provided it has the correct

registration documents, the correct traffic lighting and permits.

• The workplace must be sufficiently lit at all times.

• It is the responsibility of the operator to ensure that bystanders (people who are not

the operator) cannot get into the path of the machine, the interchangeable

accessories or the loads.

Safety instructions during certain activities

• Make sure that no one is at risk.

• If there is danger, give a warning signal and stop the machine if necessary.

• Before using the machine, allow the machine to warm up in a well-ventilated area.

• If you do not have sufficient visibility, make sure you are assisted by trained personnel.

These personnel must be recognizable and stay within your field of vision at all times.

• The machine must not be used in landfills where there is a risk of the machine falling,

unless there are provisions that prevent rolling or crashing.

• When you are no longer using the machine, stop the machine.

Altri manuali per KM 80

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Knikmops Caricatore frontale

Knikmops

Knikmops KM 80 Manuale utente

Manuali Caricatore frontale popolari di altre marche

Hitachi

Hitachi ZW 550-6 Manuale utente

Bush Hog

Bush Hog TOUGH 2426QT Manuale utente

Aosom

Aosom 370-167V80 Manuale utente

ahlmann

ahlmann AL 80S Manuale utente

jcb

jcb 2CX Manuale utente

Wacker Neuson

Wacker Neuson WL 30 Manuale utente

ahlmann

ahlmann AF 60e Manuale utente

McNeilus

McNeilus Contender Manuale utente

WIFO

WIFO K55A Manuale dell'operatore

RHINO

RHINO F-4123C Manuale utente

Barko Hydraulics

Barko Hydraulics Barko Loaders 160B Manuale utente

Simplicity

Simplicity 510 Manuale utente

RHINO

RHINO 2410 Manuale utente

SDLG

SDLG LG936 Manuale

Avantco

Avantco R35 Manuale utente

Morbark

Morbark RAYCO 1800 AWL Manuale di installazione e d'uso

New Holland

New Holland B100C Manuale utente

Bush Hog

Bush Hog 3860 QT Manuale utente