2 7
KOBE
P R O F E S S I O N A L
AIR TOOLS
SAFETY INSTRUCTIONS
You have purchased a quality professional product that is designed for high
performance and long service life. If correct use, safety and maintenance
procedures are observed this machine will last for many years.
KOBE PROFESSIONAL AIR TOOLS
have been specifically designed to help you work
SAFELY and EFFICIENTLY. Your care and good judgement are the best protection against injury, but
always ensure that the appropriate safety equipment is worn. All possible hazards cannot be covered here,
but the most important ones have been highlighted.
lAlways adhere to the processes and safety
warnings, which are stated in the instruction
manual of your air tools which are used in
conjunction with your air compressor.
GENERAL OPERATING HA ARDS
lAlways ensure the mains power supply
corresponds to the power rating on the data label
on the machine.
lAlways p l u g t h e air c o m p r e s s o r i n t o an
appropriate outlet that is properly installed and
grounded. Check with a qualified electrician if
you are in doubt as to whether the outlet is
properly grounded.
lAlways disconnect from the electrical power
supply and ensure that all the compressed air
has been released from the receiver tank before
cleaning or carrying out user maintenance.
lAlways stay alert and watch what you are doing.
lAlways ensure the maintenance of electrical
components is carried out by a suitably qualified
person.
lNever operate the air compressor or any air tool
when tired or under the influence of alcohol or
prescription/non-prescription drugs.
lNe v er opera t e i f any part s a r e missin g o r
damaged.
lNever touch the metal plug pins when connecting
or removing the electrical plug.
WORKPLACE HA ARDS
lAlways keep the high pressure hose and electric
cable away from heat and sharp edges.
lAlways use a RCD (Residual Current Device) to
provide protection against electric shock.
lNever use plastic pipe for high pressure air line
as it could shatter,resulting in serious injury.
lNever leave inflammable objects near the
compressor.
lNever run the air compressor in areas exposed
to water or in damp conditions.
lNever direct jets of water or flammable liquids
over the air compressor.
lNever use the air compressor near naked
flames.
PERSONAL PROTECTION
lAlways wear approved eye protection during
operation.
lAlways ensure that all long hair and loose clothing,
ties, scarves, jewellery, etc., are secured or
removed.
lNever direct air at yourself, anyone else or at
animals.
SPECIFIC OPERATING HA ARDS
lAlways use recommended attachments or parts.
lAlways use the handle to move the compressor.
Do not move it by any other means.
lAlways place the air compressor on a firm and
level surface.
lAlways ensure the electric cable is not damaged
before connecting the air compressor to the
electricity supply.
lAlways switch off using the on/off lever when the
air compressor is not in use. This will avoid any
unintentional starting.
lAlways close the tap and discharge residual
pressure in the air hose before disconnecting the
air hose from the compressor.
lAlways check for damaged or loose hoses and
fittings. Whipping hoses can cause serious
injury.
lAlways be careful when handling the compressor
as components such as the delivery pipe and the
cooling fins of the cylinder head can become very
hot and remain hot for some time after use.
lNever tamper with, or attempt to adjust the
pressure switch or the safety valve. The air
compressor must always be serviced by an
authorised agent.
lNever use the air compressor without the air
filter attached.
lNever use the air compressor for filling breathing
tanks, diving tanks or for pharmaceutical, food or
health applications.
SYMBOLS USED ON THE AIR COMPRESSOR
Warning Hot components Shock hazard WEEE Symbol Read the operator’s manual
KOBE
P R O F E S S I O N A L
AIR TOOLS
TROUBLESHOOTING Continued
KOBE
P R O F E S S I O N A L
AIR TOOLS
SERVICE & REPAIR
A comprehensive repair and service
facility is available through your
local agent.
KOBE
P R O F E S S I O N A L
AIR TOOLS
SPARES
For spare parts or servicing please contact your nearest agent. Remember to quote tool model number and
spare part number when ordering spares. The use of other than genuine Kobe replacement parts may
result in safety hazards, decreased tool performance and increased maintenance. When disposing of
components, etc. ensure that relevant environmental procedures are carried out.
Air Intake Filter unit KBE-298-4846Y
Filter Eelement KBE-298-4847Z
Drain valve KBE-298-4866T
Check Valve set KBE-298-4873A
Fig. 10
Valve seat
POSSIBLE CAUSE
The pre-set pressure
switch is defective or
needs adjusting.
Faulty safety blow off
valve.
SOLUTION
Stop the air compressor immediately and
contact your local Kobe agent.
Contact your local Kobe agent.
FAULT
The motor pump unit does
not stop when the tank
pressure reaches its
maximum working
pressure (116PSI) and the
safety valve vents air.
Safety blow off valve
operates below the
maximum pressure.
