KODA LM56123 Guida
CARE & USE INSTRUCTIONS
IMPORTANT, RETAIN FOR
FUTURE REFERENCE: READ CAREFULLY
ITM. / ART. 1165831
Model: LM56123
LED CEILING LIGHT
WITH MOTION SENSOR
AND REMOTE
For questions or issues regarding the product, please contact Horizon Brands at 1-866-294-9244 (English) or send an
email to inf[email protected]om. Representatives are available Monday through Friday from 8 AM to 5 PM (Pacific Time).
2975 Red Hill Ave., Ste. 100, Costa Mesa, CA 92626, USA
www.KodaBuilt.com
TM
2
This LED Ceiling Light is suitable for use in any indoor location (e.g. home, office, warehouse,
workshop, garage, and etc.). This light has the following unique features:
• Built-in Smart Sensor Control System: This LED Ceiling light is operated by a Smart
Sensor Control. It will automatically turn on when motion is detected and will turn off
automatically after no movement is detected in the area for preset time.
• Convenient Wireless Remote: With the remote control, you can easily adjust the light
color, brightness, sensor distance, and the timer for auto-off.
• Adjustable Light Color: Along with the remote control, you can easily adjust the light
color from warm white to cool white for the best fit for your environment.
• CRI 90: The high CRI (color rendering index) helps show the object color more naturally
and clearly than lights with lower CRI ratings.
Important Safety Instructions:
Please read the following safety information before use.
To reduce risk of fire, electric shock, or injury to persons:
• Turn OFF the main power at the fuse or circuit breaker before installing the light
fixture or making any electrical connection.
• Make sure this light fixture is adequately grounded. To ensure proper grounding,
there must be a separate ground wire (bare copper) contact between this light
fixture and the ground connection of your main power supply panel. Do not connect
the bare or green insulation fixture ground wire to the black (hot) current-carrying
wire or the white (neutral) wire. Connection of the bare or green fixture ground wire
to the black or white wires may cause metal parts of the fixture to carry electrical
currents, and may cause electrical shock, which could cause serious injury or death.
• Do not suspend any fixture by the house wires. Suspending a fixture by the house
wires and wire connectors may result in the fixture falling, possibly causing
personal injury and the danger of electrical shock or fire.
• It is recommended that a qualified electrician perform all wiring connections. All
electrical connections must be in accordance with all national and local electrical
codes.
• This light fixture is designed for use in a
110 – 120
VAC,
6
0
Hz fuse circuit. Not for use
on a dimming circuit.
• For indoor use only. Suitable for damp locations.
Warning:
• LED light output is strong enough to injure human eyes. Precautions must be taken to
prevent looking directly at the LEDs without installing the diffuser (cover) for more
than a few seconds.
• If the lighting light fixture is damaged, it shall be exclusively replaced by the
manufacturer or the service agent or qualified person in order to avoid a hazard.
• Do not tamper with or attempt to repair the LED component or fixture. The light
source is designed for this specific application and should not be serviced by
untrained personnel. Contact the customer service department if any servicing is required.
• The warnings, precautions, and instructions discussed in this manual cannot cover all
possible conditions and situations that may occur. The operator must understand that
common sense and caution are factors which cannot be built into this product, but
3
must be supplied by the operator.
• Do not install this LED Ceiling Light with a dimmer. Doing so may damage the driver
inside if used with a dimming circuit.
• This device does not have a plug; rewiring is required. If you are unsure how to rewire
this light, please contact a qualified electrician to install instead of attempting to
rewire yourself.
• Power will still run to the light even after the LED lifespan runs out. Always shut the
power from the fuse (breaker) when conducting any type of maintenance on the light.
Cleaning:
• Clean the outside of the fixture with a soft, dry cloth or slightly dampened clean cloth.
Never use a cleaner with chemicals, solvents, or harsh abrasives to clean the product.
• Do not spray cleaner directly onto any part of the fixture or LEDs as this may
permanently damage the light or its functions.
PACKAGE CONTAINS:
Tools Needed (not included):
1 x LED Ceiling Light 1 x Wireless Remote
2 x AAA Batteries 2 x Mounting Screws
3 x Wire Nuts
Phillips-Head Screwdriver
Please lay out all parts and read the instructions prior to installation.
AAA
AAA
4
INSTALLATION PROCEDURES:
BEFORE INSTALLATION:
Carefully remove the light fixture, mounting package, and wireless remote from the box
and check that all parts are included. Do not attempt to assemble the product if any part is
missing or damaged.
The outlet box described in this manual is not provided. A standard outlet box needs to be
pre-installed in the ceiling, and the power supply wires need to be run to the outlet box
providing 120Vac of power. If an outlet box does not exist, contact a qualified electrician for
installation.
Please turn OFF the main power at the fuse or circuit breaker before installing the light
fixture or making any electrical connection. You may use a non-contact voltage tester to
ensure no power running to the wires.
Warning: Failure to disconnect the power supply prior to installation may result in serious
injury or death.
1. Rotate the cover (Part B) counter-
clockwise to detach it from the lamp body
(Part A).
Part B
Part A
3. Make the following spliced wire
connections using wire nuts:
• White (neutral) supply wire to White light
fixture wire
• Black (hot) supply wire to Black light
fixture wire
• Green (ground) supply wire to Green /
Yellow light fixture wires
Screw the wire nuts in a clockwise direction.
Make sure no bare wire or wire strands are
visible after making the connections.
Consult with a qualified electrician if you
have any electrical questions or if your
current power supply does not include a
ground wire.
Warning: Never connect the ground wire to
the black or white power supply wires.
2. Install the mounting screws into outlet box
until there is about 12.7 mm / 0.5 in. between
the ceiling and underside of the screw head.
5
5. Place the lamp body over the outlet box
and feed the mounting screws through
the inner keyhole slots. There are two
pairs of keyhole slots. Please choose the
appropriate pair of keyhole slots to fit with
the of outlet box.
6. Rotate the lamp body clockwise so that
the mounting screws slide into the narrow
ends of the keyhole slots.
7. Tighten the mounting screws to ensure
the lamp body is secured against the
ceiling.
4. Carefully place all the wires and wire
connections into the outlet box.
9. When the installation is finished, you
can turn on the main power and the light
will turn on. If the light does not turn on,
please refer to the Troubleshooting section
of this manual.
8. Attach the cover to the lamp body, and
rotate the cover clockwise to secure in
place. To ensure complete securement,
please rotate the cover until you cannot
rotate further.
6
WIRELESS REMOTE:
Before use, please open the switch cover on the back of the remote, and insert two AAA
batteries.
When using the remote, you must point the remote directly at the light to ensure the signals
can be sent to the light. When the light receives the remote signal, the light will blink once
as a visual confirmation. When the light receives the remote signal of either Ambient Light
Sensor OFF or Motion Sensor OFF, the light will blink twice as a visual confirmation.
Note: This remote uses infrared (IR) to send commands to the LED Ceiling Light. It is
possible to control multiple LED Ceiling Lights from one remote as long as the lights are
within line-of-sight of the remote to receive commands.
1. Power Button
Press the button to turn the light on or off.
NOTE: When you press the power button to turn the light off while the motion sensor is set
to on, the light will turn on automatically again when motion is detected.
2. Night Mode
By pressing the button, the light will change to warm white (2700K) and 10% of
full brightness. This mode provides you a warm, soft color at night.
3. Brightness
You can adjust the brightness from 10% to 100% full brightness by pressing the button
continuously . Press the button to increase the brightness, and press the button to
dim. You may also press the Max button to reach 100% brightness instantly, or Min button to
reach 10% brightness instantly.
REMOTE SETTINGS:
12
3
6
4
5
7
8
7
4. Light Color
You can adjust the light color from 2700K to 5000K by pressing the light color buttons
continuously. Press the < button for a warmer color and press > for a cooler color. You may
also press the Warm button to reach 2700K warm white color instantly, or Cool to reach
5000K cool white color instantly.
5. Ambient Light Sensor
You may activate the ambient light sensor by pressing the ON or OFF buttons.
ON: When the surrounding ambient light is bright, the light will stay off even if motion has
been detected. When the surrounding light is less bright and there is motion detected, the
light will turn on. The light will turn off automatically when there is no further movement
during the preset time.
OFF: The light turns on and off accordingly to the motion sensor setting, and is not affected
by surrounding light.
NOTE: If the motion sensor is turned off to disable the motion sensor feature, the Ambient
Light Sensor feature will be automatically turned off. In this case, the light must be turned
on with the included wireless remote or wall switch.
6. Motion Sensor
You can enable or disable the motion sensor by pressing the ON or OFF buttons. ON: The
light will automatically turn on when motion is detected and will turn off automatically when
there is no movement in area for preset time.
OFF: The light will be function as an ordinary light to operate manually through the wireless
remote or wall switch.
7. Time Until Off (no motion)
It is the duration the light stays on before dimming then shutting off completely when there
is no motion detected. When the light dims, it will dim to 50% of your preset brightness. You
can choose from 1 min, 5 min, 10 min, or 30 min. Please see below settings to select the auto
shut-off time most suitable for your location.
Settings:
1 Min Off (last 30 sec dim down)
5 Min Off (last 1 min dim down)
10 Min Off (last 1 min dim down)
30 Min Off (last 1 min dim down)
The light will shut off when there is no motion detected within the preset time.
For example, when choosing 5 min, the light will dim down to 50% of the current brightness
when no motion has been detected for 4 minutes and the light will shut OFF when no motion
is detected within 1 minute after. Any movement detected within this period will restart the
timer and the light will turn on again.
8
Product Specifications:
• Operating Voltage: 120Vac, 60 Hz
• Wattage: 22 W Max
• Light Output: 1600 lm
• Color Temperature: 2700K – 5000K
• LED Life Cycles: up to 50,000 hrs*
• CRI: 90
• Operating Temperature: 0°C to 40°C / 32°F to 104°F
*50,000-hour lifespan is for the LED only. Lifespan depends on operating
temperature, environmental conditions, etc.
350 mm / 13.7 in / 13.7 po
This product is ETL/cETL Listed
350 mm / 13.7 in / 13.7 po
81 mm / 3.1 in / 3.1 po
Setting Maximum Sensing Distance (D)
Very near 1 m - 2 m / 3.2 ft - 6.5 ft
Near 2 m - 3.5 m / 6.5 ft - 11.4 ft
Mid-range 3.5 m - 5 m / 11.4 ft - 16.4 ft
Far 5 m - 7 m / 16.4 ft - 22.9 ft
2.4 m / 7.8 ft.
8. Distance
Distance is the maximum motion detection range. You can choose from various settings:
Very near, Near, Mid-range and Far. The sensing distance would be ranged from around 1 m
/ 3.2 ft to 7 m / 22.9 ft. You may refer to the table below for the maximum sensing distance
for the light installed at a height of 2.4 m / 7.8 ft.
Any movement inside the detection zone will be detected by the motion sensor.
Actual sensing distance may be influenced by environment conditions.
For example, the sensing distance decreases in an open area free of objects. The distance
increases in an area with lots of metallic objects.
9
Troubleshooting:
Problem Possible Cause Solution
Light does not
illuminate.
Light does not turn
on.
Power is off.
Make sure power supply is on.
Ensure the circuit breaker is in the
on position as well.
Faulty wire connection.
Check wiring to ensure all wires
are correctly wired and are wired
securely.
Faulty switch. Test and/or replace switch.
LED Ceiling Light burned out. Replace the LED Ceiling Light.
Light does not turn
on during the day.
Make sure the Light Sensor feature is
not enabled (only allowing the light to
turn on when the background light is
darker).
Turn Light Sensor off to disable
this feature.
Fuse blows or
circuit breaker
trips when light is
illuminated.
The wires are crossed (not wired
properly) or the power wire is
grounding out.
Turn power to the light off from the
breaker. Check the wires to ensure
the wires were properly connected.
If everything looks correct, contact a
qualified electrician to check
your wires.
Light settings
cannot be changed
from the remote.
Batteries not inserted correctly.
Open the battery compartment cover
and confirm the batteries were
inserted correctly. Replace with new
batteries if needed.
Batteries are out. Replace with two new AAA batteries.
Remote control is out of range. Move closer to the LED Ceiling Light
to select changes from the remote.
Light is always on.
Continuous movement in the detection
zone.
Change the distance setting to
shorter distance, such as Very near.
Motion sensor has been turned off. Turn on the motion sensor.
10
Warranty:
Horizon Brands
This Horizon Brands product carries a 3 years warranty against defects in workmanship and
materials. This product is not guaranteed against wear or breakage due to misuse and/or
abuse.
NOTE: Warranty only applies for North American customers of purchases made in North
America.
Conditions of Warranty
If during the 3 years warranty period your new product is found to be defective, Horizon
Brands will repair such defect, or replace the product, without charge for parts or labor
subject to the following conditions:
• All repairs must be performed by Horizon Brands.
• All warranty claims must be accompanied by a copy of the sales receipt or bill of sale.
• The equipment must not have been altered or damaged through negligence,
accident, improper operation, or failure to follow the product instructions for
installation, use, or care.
• The replacement of parts is excluded from the warranty when replacement is
necessary due to normal wear and tear.
• Repair or replacement parts supplied by Horizon Brands under this warranty
are protected only for the unexpired portion of the original warranty.
• This is a “repair or replace” warranty only, and does not cover the costs incurred for
the installation, removal or reinstallation of the product.
OWNER’S RESPONSIBILITIES: Horizon Brands will make every effort to provide warranty
service within a reasonable period of time. SHOULD YOU HAVE ANY QUESTIONS ABOUT
SERVICE RECEIVED OR IF YOU WOULD LIKE ASSISTANCE IN OBTAINING SERVICE, PLEASE
CALL TOLL FREE 1.866.294.9244 DURING REGULAR BUSINESS HOURS MONDAY THROUGH
FRIDAY 9:00 AM TO 5:00PM PST.
Indice
Lingue:
Altri manuali KODA Luce da lavoro
