Kogan NBLTSPBTMSA Manuale utente

Indice

Altri manuali Kogan Attrezzatura di illuminazione

Kogan

Kogan KARILI10LEA Manuale utente

Kogan

Kogan NBOLXMASSLA Manuale utente

Kogan

Kogan SMARTERHOME KAABLGTBARC Manuale utente

Kogan

Kogan SMARTERHOME KATVLTHDMIA Manuale utente

Kogan

Kogan KARILI19LEA Manuale utente

Kogan

Kogan KARILI12LEB Manuale utente

Kogan

Kogan KARILI12LEA Manuale utente

Kogan

Kogan SMARTERHOME KA52CWCLRWA Manuale utente

Kogan

Kogan KARILI10LEB Manuale utente

Kogan

Kogan SMARTERHOME KAABLGTBARB Manuale utente

Kogan

Kogan NBLTFSLM02A Manuale utente

Kogan

Kogan NBLTSLWMMSA Manuale utente

Kogan

Kogan KAPKVIDLBKA Manuale utente

Kogan

Kogan SMARTERHOME KA52CWCLSWA Manuale utente

Kogan

Kogan NBOTLTUBBPA Manuale utente

Kogan

Kogan SMARTERHOME KA2MWPLTSPA Manuale utente

Kogan

Kogan NBOTLTSLP2A Manuale utente

Kogan

Kogan Yeelight sunflower Guida all'installazione

Kogan

Kogan KAMODLGT10A Manuale utente

Kogan

Kogan SMARTERHOME KBE27RGBC1A Manuale utente

Manuali Attrezzatura di illuminazione popolari di altre marche

Brizo

Brizo 8SP-MU-4 Manuale utente

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manuale utente

IKEA

IKEA BJÖRKSPIREA Manuale utente

Laserworld

Laserworld Evolution Series ES-400RGB Manuale utente

Alien

Alien RG STAR Manuale utente

EuroLite

EuroLite LED B-40 Manuale utente

Qazqa

Qazqa Suplux SL 3 Black 103062 Manuale utente

Commercial Electric

Commercial Electric 54568141 Manuale utente

CREE LIGHTING

CREE LIGHTING 304 Series Manuale utente

Goobay

Goobay 49867 Manuale utente

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manuale utente

Alkalite

Alkalite Krypton KT-81 Manuale utente

Clas Ohlson

Clas Ohlson GU10 Manuale utente

DTS

DTS DELTA 10 F Manuale utente

ring

ring Solar Steplight Manuale utente

One Stop Gardens

One Stop Gardens 57696 Istruzioni per il montaggio

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manuale utente

SIREM

SIREM Swimeo A2 Manuale utente

BATTERY POWERED WALL MOUNTED

MOTION SENSOR LED LIGHT

NBLTSPBTMSA

•Do not install the light close to people or cars. Keep out of reach of children.

•Do not install the unit close to flammable items.

•Do not stare directly into the light.

•When changing batteries, use only new 1.5V D-cell batteries.

Important information

The light is IP44 rated, meaning it is fully resistant to water splashes from any direction.

However, if the light is completely exposed to the elements and poor weather, some

penetration may be possible. If using outdoors, it is advised that you install the light in a

location with some protection, example an overhang of a roof, porch or garage.

1

Light and motion sensors

2

LED lights

3

Fixed base

4

Elevation control knob

5

Rotation control knob

SAFETY & WARNINGS

OVERVIEW

The wireless light is a powerful outdoor light with a durable ABS casing. The quadruple LED

display generates an impressive 600 lumens (8W) of bright white light, activated by a built-

in motion sensor.

This battery powered light requires no wiring, making for a quick and easy installation. The

body can also be rotated a full 360° to illuminate at your desired angle. Each activation lasts

30 seconds and a built-in light sensor prevents activation during daylight, conserving your

battery power.

Changing the batteries

1. Remove the front cover of the light by unscrewing in anti-clockwise direction (Figure

1), revealing the battery holder. Separate the battery holder by squeezing the two

tabs on the side and pulling (Figure 6).

2. Insert 4 x D-cell batteries into the holder (Figure 7), ensuring the correct polarity.

3. Reattach the battery holder by aligning the grooves on the side and clicking the

tabs into the inside of the holder (Figure 8). Screw the light back onto the holder

(Figure 1).

Figure 6

Figure 7

Figure 8

INSTALLATION

Note:

You do not have to remove the full fixture from the wall to change the batteries.

Mounting the light

1. The light requires 4 x D-cell batteries to be installed before use. Remove the cover

and install the batteries, being careful to install them in the correct polarity.

2. Reattach the front cover by aligning the grooves and screwing in clockwise

direction, as far as it goes. Make sure the arrow is pointing at the lock symbol to

ensure the waterproof seal is tight.

3. To wall mount your light, first remove the mounting base by turning the thumb

screw anti-clockwise (Figure 2).

4. Utilise the three holes to secure the mounting base to your desired wall, using the

screws provided (Figure 3). For best results and depending on your installation

location, consider drilling three pilot holes and using the wall plugs provided.

5. Insert the light unit back into the mounting base (Figure 4). You can now rotate the

light to a full 360° to achieve the desired angle, before tightening the thumb screw

in clockwise direction.

6. You can also pivot the light up and down to your desired angle by loosening the

upper thumb screw in anti-clockwise direction (Figure 5). Once the angle is set,

tighten the thumbscrew in clockwise direction.

Figure 1

Figure 2

Figure 3

Figure 4

Figure 5

•1 X Battery-Powered LED Sensor Light

•3 X Screws

•3 X Wall Plugs

IN THE BOX

NOTES

Need more information?

We hope that this user guide has given you

the assistance needed for a simple set-up.

For the most up-to-date guide for your product,

as well as any additional assistance you may require,

head online to help.kogan.com