2
INTRODUCTION
ThankyouforpurchasingaqualityMiraproduct.To
enjoythe fullpotential ofyour newproduct, please
take time to read this guide thoroughly, having
done so, keep it handy for future reference.
MiraECO adjustableshowerfittingsaredesigned
to give a satisfactory shower over a range
of pressures. These fittings are suitable for
pressures between 0.5 and 5.0 bar and are
available in chrome or white finishes.
General
1. Makesure thattheshowerfittingsareinstalled
by a competent installer.
2. InstallationsmustcomplywithWaterRegulations
(Bye-Laws, Scotland), and any other Local
RegulationsandBuilding Regulations in force
at the time of installation.
3. Before installation carefully inspect the new
fixture for any signs of damage.
4. The shower fittings should be positioned at a
convenient height for all the family. Position
thefittingstosprayacross ratherthentowards
the opening of the cubicle and also away from
the shower control. Avoid layouts where the
shower hose will be sharply kinked. This may
reduce the life of the hose.
5. A hose retaining ring is supplied to prevent
the showerhead from dropping below the spill
over level of the bath or shower, which could
lead to contamination from backsiphonage.
The supplied hose retaining ring should meet
the great majority of user requirements for
showerinstallationswith flexibleoutlet fittings.
However, there will be occasions when the
hose retaining ring will not provide a suitable
solution. In these instances an outlet double
check valve, e.g. the Mira DCV-H, must be
fitted. The inclusion of the Mira DCV-H will
increasethe requiredsupply pressuretypically
by 0.1 bar.
6. Special consideration should be given to the
fixing arrangements when installing onto a
dry lined, stud partition, shower cubicle or
laminatedpanel wallstructures.Installers may
wish to obtain alternative proprietary cavity
fixings, or choose other options, however,
these methods of fixing are beyond the scope
of this guide.
If you experience any difficulty with the
installation or operation of your new shower
fittings, please refer to ‘Fault Diagnosis’,
beforecontactingKohler MiraLtd. Ourcontact
details can be found on the back cover of
this guide.
CONTENTS
Introduction 2
General 2
Pack Contents 3
Pack Contents 4
Specifications 5
Pressures 5
Dimensions 5
Flow Rates 5
Installation 6
RAC Assembly 6
Mira Eco Shower Fittings 8
Operation 9
User Maintenance 10
Fault Diagnosis 10
Cleaning 10
Spare Parts 11
Customer Service 12
Design Registration 3 003 935
