Konica Minolta 7065 Manuale utente

7065

Before copying, read this guide.

Keep in the right hand rear pocket of the machine.

INSTRUCTIONMANUAL

Thank you very much for your purchase of the Konica 7065.

This Manual deals with making copies, correct handling of the machine, and

precautions for safety. Please read before copying.

In order to maintain a satisfactory copying performance, please keep this

Manual readily available for reference in the right hand rear pocket of the

machine.

ENERGY STAR

Program

The ENERGY STAR Program has been established

to encourage the widespread and voluntary use of

energy-efficient technologies that reduce energy

consumption and prevent pollution.As an ENERGY

STAR Partner, Konica Corporation, Inc. has

determined that this product meets the ENERGY

STAR guidelines for energy efficiency grounding it on

the following features.

Auto Low Power

This function conserves energy by lowering the set temperature of the fixing

unit. In the standard setting, Auto Low Power operates automatically when 15

minutes have elapsed after completion of the last copy, with the copier remaining

in the ready to copy state during that time.

The time period for the Auto Low Power function can be set for 5 minutes, 10

minutes, 15 minutes, 30 minutes, 60 minutes, 90 minutes, 120 minutes, or 240

minutes. See p.5-2 for details.

Automatic Shut-Off

This function achieves further energy conservation by partially turning OFF the

power supply, thereby reducing energy consumption to 20W or less. In the

standard setting, Automatic Shut-Off follows Auto Low Power, operating

automatically when 90 minutes have elapsed after completion of the last copy,

with the copier remaining in the ready to copy state during that time.

The time period for the Automatic Shut-Off function can be set for 30 minutes,

60 minutes, 90 minutes, 120 minutes or 240 minutes. See p. 5-3 for details.

Automatic Duplex Copying

To reduce paper consumption, use this function to make double-sided (duplex)

copies, automatically.

We recommend that you utilize the Auto Low Power function, the Automatic

Shut-Off function, and the Automatic Duplex Copying function.

Contents

Safety

Information

Machine

Information

Paper

Information

Copier

Management

Basic

Operation

Output

Modes

Tandem

Mode

Scanning

Condition

Applications

Job

Memory

Key Operator

Mode

Maintenance

& Supplies

Trouble-

shooting

Machine

Specifications

Introduction

Section 1: Introduction

Features of the Konica 7065 .........................................................................................1-2

Copier Features ............................................................................................................1-7

Standard Equipment ..............................................................................................1-7

Optional Equipment ...............................................................................................1-7

Section 2 : Safety Information

Caution Labels and Indicator ........................................................................................2-2

Danger, Warning and Caution Symbols ........................................................................2-4

Requirements for Safe Use...........................................................................................2-5

Power Source ........................................................................................................2-5

Environment...........................................................................................................2-7

Precautions for Routine Handling ........................................................................2-10

Section 3: Machine Information

Machine Configuration ..................................................................................................3-2

External Machine Call-outs ....................................................................................3-3

Internal Machine Call-outs .....................................................................................3-3

Standard/Optional Equipment................................................................................3-4

Control Panel Layout.....................................................................................................3-7

Touch Screen ................................................................................................................3-8

Full-Automatic Mode Screen..................................................................................3-8

Basic Screen (Layer Selection Screen) .................................................................3-9

Basic Screen (Direct Selection Screen).................................................................3-9

Initial Settings..............................................................................................................3-10

Auto/Reset Mode ........................................................................................................3-10

Automatic Paper Selection (APS) ...............................................................................3-10

Automatic Magnification Selection (AMS) ...................................................................3-10

Automatic Exposure (AE)............................................................................................3-10

Automatic Tray Switching (ATS)..................................................................................3-10

Lead Edge Delete .......................................................................................................3-11

Service Settings .......................................................................................................... 3-11

Finisher-Paper Capacity ...................................................................................... 3-11

Key Operator Password....................................................................................... 3-11

EKC Master Key Code......................................................................................... 3-11

Weekly Timer Master Key Code .......................................................................... 3-11

Weekly Timer Key in Help Screen ....................................................................... 3-11

Control Panel Contrast Key in Help Screen......................................................... 3-11

Staple Sheet Capacity .........................................................................................3-12

Notice Message: ADD TONER/ PM CALL/ APPLICATION/INTERRUPT ............3-12

Basic Screen Selection ........................................................................................3-12

Section 4: Paper Information

Positioning Originals on the Platen Glass .....................................................................4-2

Positioning an Original for Manual Copying...........................................................4-2

Using the Reversing Automatic Document Feeder (RADF)..........................................4-3

Positioning Originals ..............................................................................................4-4

Positioning Mixed Originals....................................................................................4-5

Paper in Main Body Trays .............................................................................................4-6

Paper in Large Capacity Tray (LT-352) (Option) ...........................................................4-6

Paper in Multi-Sheet Bypass Tray.................................................................................4-6

Contents

Section 4: Paper Information (continued)

Paper in Automatic Duplex Unit ....................................................................................4-6

Paper in FS-106 Finisher (Option) ................................................................................4-7

FS-106 Finisher Primary (Main) Tray.....................................................................4-7

FS-106 Finisher Secondary (Sub) Tray .................................................................4-7

Paper in FS-108BM Finisher (Option)...........................................................................4-8

FS-108BM Finisher Primary (Main) Tray ...............................................................4-8

FS-108BM Finisher Secondary (Sub) Tray ............................................................4-8

FS-108BM Finisher Booklet Tray ...........................................................................4-9

Paper in Cover Sheet Feeder (PI-108) (Option) ...........................................................4-9

Paper in Punching Unit (PU-108) (Option)..................................................................4-10

Paper in Trimmer Unit (TU-108) (Option)....................................................................4-10

Paper Weight Compatibility Chart ...............................................................................4-10

Section 5: Copier Management

Power Saver Mode........................................................................................................5-2

Auto Low Power.....................................................................................................5-2

Manual Low Power ................................................................................................5-3

Auto Shut-Off .........................................................................................................5-4

Manual Shut-Off.....................................................................................................5-4

Entering an EKC Password...........................................................................................5-5

Weekly Timer Function..................................................................................................5-6

Timer Interrupt........................................................................................................5-6

Section 6: Basic Operations

How to Make a Basic Copy ...........................................................................................6-2

The Full-Automatic Mode.......................................................................................6-2

The Basic Screen...................................................................................................6-2

Copy Mode....................................................................................................................6-5

Copy Density.................................................................................................................6-8

Automatic Exposure (AE).......................................................................................6-8

Manual Mode (Lighter, Normal, Darker).................................................................6-8

Userset Density (USERSET 1, USERSET 2) ........................................................6-9

Density Shift......................................................................................................... 6-11

Lens Mode ..................................................................................................................6-13

Automatic Paper Selection (APS) ........................................................................6-13

Automatic Magnification Selection (AMS)............................................................6-14

Preset and User Set Ratios .................................................................................6-15

Zoom Mode..........................................................................................................6-16

Vertical/Horizontal Zoom......................................................................................6-17

Paper size ...................................................................................................................6-19

Reserve.......................................................................................................................6-20

Set Reserve Job ..................................................................................................6-20

Troubleshooting in Reserve Setting .....................................................................6-22

Status ..........................................................................................................................6-24

Memory Copy..............................................................................................................6-26

Platen Memory Copy ...........................................................................................6-26

RADF Memory Copy............................................................................................6-28

Output Mode for Machine without Finisher .................................................................6-30

Rotation.......................................................................................................................6-33

Rotation and APS.................................................................................................6-33

Contents

Safety

Information

Machine

Information

Paper

Information

Copier

Management

Basic

Operation

Output

Modes

Tandem

Mode

Scanning

Condition

Applications

Job

Memory

Key Operator

Mode

Maintenance

& Supplies

Trouble-

shooting

Machine

Specifications

Introduction

Section 6: Basic Operations (continued)

Rotation and AMS ................................................................................................6-34

To Release Automatic Rotation............................................................................6-35

Check Mode and Proof Copy ......................................................................................6-36

Interrupt Mode.............................................................................................................6-40

Help Mode...................................................................................................................6-42

Using the Multi-Sheet Bypass Tray .............................................................................6-43

Section 7: Output Modes

FS-106 Finisher Specifications .....................................................................................7-2

FS-108BM Finisher Specifications ................................................................................7-3

Non-Sort Mode Using Primary (Main) Tray ...................................................................7-5

Sort Mode Using Primary (Main) Tray...........................................................................7-6

Staple-Sort Mode Using Primary (Main) Tray ...............................................................7-7

Group Mode Using Primary (Main) Tray ..................................................................... 7-11

Output Modes Using Secondary (Sub) Tray................................................................7-12

Folding, Stapling & Folding and Trimming Modes (FS-108BM/TU-108)......................7-14

Cover Sheet Feeder (FS-108BM with PI-108) ............................................................7-17

Punching Mode (FS-108BM/FS-106 with PU-108) .....................................................7-19

Manual Stapling (FS-108BM)......................................................................................7-21

Section 8: Original Scanning Condition

Original Scanning Condition Menu................................................................................8-2

Resolution (High Quality) ..............................................................................................8-3

High Mode..............................................................................................................8-3

Very High Mode .....................................................................................................8-5

S600.......................................................................................................................8-7

Text/Photo Enhance......................................................................................................8-9

Original Variety............................................................................................................8-12

Mixed Original ......................................................................................................8-12

Z-Folded Original .................................................................................................8-15

Original Form ..............................................................................................................8-17

Section 9 : Applications

Application Function Menu............................................................................................9-2

Sheet/Cover Insertion ...................................................................................................9-3

Chapter .........................................................................................................................9-9

Combination ................................................................................................................9-12

Booklet ........................................................................................................................9-15

OHP Interleave............................................................................................................9-20

Image Insert ................................................................................................................9-23

Dual Page ...................................................................................................................9-27

Program Job................................................................................................................9-30

Non-Image Area Erase................................................................................................9-32

Reverse Image............................................................................................................9-35

Repeat Image..............................................................................................................9-37

Frame/Fold Erasure ....................................................................................................9-40

AUTO Layout ..............................................................................................................9-43

Thin/Thick Paper .........................................................................................................9-46

Image Shift ..................................................................................................................9-48

Overlay........................................................................................................................9-51

Contents

Section 10: Job Memory

Job Store.....................................................................................................................10-2

Job Recall ...................................................................................................................10-4

Job Memory Form .......................................................................................................10-6

Section 11:Tandem Mode

Operation in Tandem Mode .........................................................................................11-2

To Stop Scanning/Printing...........................................................................................11-5

Troubleshooting...........................................................................................................11-5

Section 12 : Key Operator Mode

To the Key Operator ....................................................................................................12-2

How to Access the Key Operator Mode ...............................................................12-3

Function Menu Map ....................................................................................................12-4

Initial Setting Mode [1].................................................................................................12-6

How to Access the Initial Setting Mode................................................................12-7

Copy Mode [1]......................................................................................................12-8

Copy Density [2]...................................................................................................12-9

Lens Mode [3] ....................................................................................................12-10

Paper Tray [4] .....................................................................................................12-11

Output [5] ...........................................................................................................12-12

Staple [6]............................................................................................................12-13

Image Scan [7]...................................................................................................12-14

Lens Mode Ratio [2] ..................................................................................................12-15

EKC (Electronic Key Counter) [3]..............................................................................12-16

How to Access the EKC Setting Mode...............................................................12-17

Entering and Amending Passwords/User Name [1]...........................................12-18

Entering Account Limits [2] ................................................................................12-20

Resetting the Accounts [3] .................................................................................12-21

Switching the EKC On or Off [4] ........................................................................12-23

Select Effect of Reaching the Copy Limit [5]......................................................12-24

Data Printing Mode ............................................................................................12-25

Lock/Delete Job Memory [4] .....................................................................................12-26

Paper Type [5] ...........................................................................................................12-28

Control Panel Contrast [6].........................................................................................12-29

Key Operator Telephone Number [7].........................................................................12-30

Weekly Timer [8] .......................................................................................................12-31

How to Access the Weekly Timer Setting Mode ................................................12-32

WeeklyTimer On/Off Setting [1] ........................................................................12-33

Summer Time Setting [2] ...................................................................................12-34

Date & Time Setting [3] ......................................................................................12-35

Timer Setting [4].................................................................................................12-36

Timer Action On/Off Setting [5] ..........................................................................12-38

Lunch Hour Off Setting [6] .................................................................................12-40

Timer Interrupt Password Setting [7]..................................................................12-41

Memory Switch [9] ....................................................................................................12-42

Control Panel Adjustment [10] ..................................................................................12-47

Auto Low Power/Auto Shut Off [11]...........................................................................12-48

Call Remote Service Centre [12] ..............................................................................12-50

Save EKC Data to Memory Card [13] .......................................................................12-51

Key Operator EKC Form ...........................................................................................12-52

Contents

Safety

Information

Machine

Information

Paper

Information

Copier

Management

Basic

Operation

Output

Modes

Tandem

Mode

Scanning

Condition

Applications

Job

Memory

Key Operator

Mode

Maintenance

& Supplies

Trouble-

shooting

Machine

Specifications

Introduction

Section 13: Maintenance & Supplies

Loading Paper .............................................................................................................13-2

Add Paper Indicator .............................................................................................13-2

Paper Level Indicator (Tray 5) ..............................................................................13-2

Using the HELP Key ............................................................................................13-2

Tray Error Indicator ( ! ) ........................................................................................13-2

Loading Paper in Tray 1 .......................................................................................13-3

Loading paper in Tray 2........................................................................................13-3

Loading Paper in Tray 3 .......................................................................................13-4

Loading paper in Tray 4........................................................................................13-4

Loading Paper in Tray 5 .......................................................................................13-5

Adding Toner ...............................................................................................................13-6

Inserting a New Staple Cartridge into FS-106 Finisher ..............................................13-8

Inserting a New Staple Cartridge into FS-108BM Finisher .......................................13-10

Empty Waste Basket of TU-108 Trimmer Unit ..........................................................13-12

Empty Waste Basket of PU-108 Punching Unit ........................................................13-13

Preventive Maintenance............................................................................................13-14

Reading the PM Count and Total Count ............................................................13-14

Cleaning the Left Partition Glass...............................................................................13-15

Cleaning the Document Glass and Cover.................................................................13-15

Section 14: Troubleshooting

Call for Service............................................................................................................14-2

Limited Use of the Copier in Trouble ....................................................................14-3

Memory Overflow ........................................................................................................14-4

Copy Conditions Using Memory ..........................................................................14-4

Action 1 ................................................................................................................14-5

Action 2 ................................................................................................................14-6

Power OFF/ON Screen ...............................................................................................14-7

Clearing Mishandled Paper.........................................................................................14-8

Copying Hints............................................................................................................14-10

Section 15: Machine Specifications

Main Body Specifications ............................................................................................15-2

Main Body ............................................................................................................15-2

RADF (DF-312)....................................................................................................15-3

Option Specifications ..................................................................................................15-4

FS-106 In-Bin Stapler Finisher.............................................................................15-4

FS-108BM In-Bin Stapler Finisher .......................................................................15-4

Cover Sheet Feeder (PI-108)...............................................................................15-4

Trimmer Unit (TU-108) .........................................................................................15-5

Punching Unit (PU-108) .......................................................................................15-5

Large Capacity Tray (LT-352) ..............................................................................15-5

Memory unit .........................................................................................................15-5

Key Counter .........................................................................................................15-5

Tandem Kit (TD-101)............................................................................................15-5

Copy Materials ............................................................................................................15-6

Maintenance Kit (150,000 copies) (except for the United Kingdom)....................15-6

Index

Section 1: Introduction

Features of the Konica 7065

Copier Features

Standard Equipment

Optional Equipment

Introduction

1 - 2

Section 1 : Introduction

Features of the Konica 7065

• AE - Automatic Exposure

Automatically adjust exposure to compensate for the original.

• Alternate Exit

When no Finisher is installed, alternately switch the horizontal and vertical orientation of

each sorted set as it outputs to the exit tray. Be sure to load both A4/B5 and A4R/B5R in

separate trays other than the Multi-sheet bypass tray.

• AMS - Automatic Magnification Selection

Automatically select an appropriate magnification ratio when Paper Size is selected

manually.In thecase ofthe DirectSelection Screen, automatically select it when [-A-]key

is touched.

• APS - Automatic Paper Selection

Automatically select copy paper size to match the original documents.

• ATS - Automatic Tray Switching

Automatically switch tray to allow copying to be continued without interruption when the

selected tray becomes empty while copying is in progress.

• Auto Layout

The original image on the platen glass is copied and centred on a sheet.

• Auto Low Power

Automatically lower the power after a specified period of copier inactivity.

• Auto Reset

Automatically reset to auto mode defaults after a specified period of copier inactivity.

• Auto Shut-Off

Automatically shut off the main power after a specified period of copier inactivity.

• Booklet

Create A5 or A4 booklets from A4 size originals in 1-2 or 2-2 copy mode.

• Chapter

Start chapter pages on the right side (front pages) of the finished document. Only duplex

mode (1-2 or 2-2) is compatible.

• Combination

Copy a fixed number (2, 4, or 8) of pages onto one sheet of copy paper.

• Copy Density

Manually select up to 9 density levels.

• Copy Mode

Select the desired simplex mode (1-1 or 2-1); or duplex mode (1-2 or 2-2).

1 - 3

Section 1 : Introduction

Introduction

Features of the Konica 7065 (continued)

• Data Printing

Print the following three types of data for confirmation; copy quantity for each password,

copy limit for each password, copy quantity for each paper size.

• Density Shift

Adjustdensity levels ofthe four densitymodes (Auto, Text, Photo, IncreaseContrast) into

two levels to lighter and three levels to darker.

• Dual Page

Copy both pages of an open book or book-size sheet separately onto two A4 sheets in 1-

1 mode or separately onto each side of one A4 sheet in 1-2 mode. You can use the Dual

Page mode with the Front or Front/Back cover mode. The cover page(s) will be scanned

and copied normally before image division is performed on the other pages.

• Frame/Fold Erasure

Erase border and/or fold image area using Frame (1 - 15mm), Fold (1 - 30mm), or Frame

& Fold.

• Image Insert

Store pages in memory from the platen glass, and insert the pages into a document

copied from the document feeder.

• Image Rotation

Beforecopying,rotatetheoriginalimagewhenitsportrait/landscapeorientationisdifferent

from the copy paper orientation.

• Image Shift

Create or remove a binding margin (shift amount from -99 ~ 250mm in 1mm increments);

reduce image to prevent image loss (reduce & shift amount from 1 ~ 250mm in 1mm

increments).

• Interrupt Copying

Interruptcopyinginprogresstoperformcopyingfromtheplatenglassordocumentfeeder.

• Job Memory

Program up to 15 jobs and Recall each job by job number or name, as needed. All

compatibleplaten glassfunctions can be programmed intoJob Memorydirectly after they

are selected.

• Lens Mode (Preset, Zoom)

Select Preset ratios, three reduction and three enlargement ratios.

Zoom ratios can be selected from 33% ~ 400% in 1% increments.

• Machine Status Confirmation

Display the current machine status on LCD for confirmation.

• Magnification

Set user-programmable ratios under User Set 1, User Set 2 and User Set 3.

Indice

Altri manuali Konica Minolta Stampante tutto in uno

Konica Minolta

Konica Minolta Magicolor 2490 MF Manuale utente

Konica Minolta

Konica Minolta bizhub C450 Manuale di istruzioni

Konica Minolta

Konica Minolta BIZHUB 164 Manuale utente

Konica Minolta

Konica Minolta Bizhub C3850 Manuale utente

Konica Minolta

Konica Minolta bizhub C220 Series Istruzioni per l'installazione

Konica Minolta

Konica Minolta bizhub 223 Manuale utente

Konica Minolta

Konica Minolta bizhub PRO 950 Series Manuale utente

Konica Minolta

Konica Minolta bizhub C452 Series Manuale di istruzioni e di sicurezza

Konica Minolta

Konica Minolta Printer/Fax/Scanner/Copier 250 Manuale utente

Konica Minolta

Konica Minolta d-Color MF3000 PF-P08 Manuale utente

Konica Minolta

Konica Minolta bizhub 423 Supplemento

Konica Minolta

Konica Minolta CF5001 Manuale utente

Konica Minolta

Konica Minolta bizhub C364e Manuale utente

Konica Minolta

Konica Minolta bizhub C280 Series Manuale utente

Konica Minolta

Konica Minolta bizhub c3110 Manuale utente

Konica Minolta

Konica Minolta bizhub 552 Manuale utente

Konica Minolta

Konica Minolta bizhub 367 Manuale utente

Konica Minolta

Konica Minolta bizhub C654 Manuale utente

Konica Minolta

Konica Minolta Bizhub 8 Series Guida all'installazione

Konica Minolta

Konica Minolta bizhub 361 Manuale di istruzioni e di sicurezza

Konica Minolta

Konica Minolta bizhub 361 Istruzioni di installazione e manutenzione

Konica Minolta

Konica Minolta bizhub C280 Series Manuale utente

Konica Minolta

Konica Minolta bizhub PRO 950 Series Manuale utente

Konica Minolta

Konica Minolta bizhub 223 Manuale utente

Manuali Stampante tutto in uno popolari di altre marche

Triumph Adler

Triumph Adler DC 2016 Manuale

Epson

Epson WorkForce WF-2510 Guida utente

Epson

Epson Stylus Scan 2000 Manuale di installazione e funzionamento

Epson

Epson PictureMate Snap PM 240 Manuale di istruzioni

Brother

Brother MFC-J430w Manuale utente

Lexmark

Lexmark MX710 Series Manuale

Brother

Brother MFC-9760 Manuale utente

Lexmark

Lexmark XC8155 Manuale utente

Lexmark

Lexmark X642E Manuale utente

Sharp

Sharp MX-2310U Guida

Aficio

Aficio 200 Manuale utente

Canon

Canon ImageCLASS 2300 Manuale

Ricoh

Ricoh Pro C900 Manuale utente

Lexmark

Lexmark X925 Manuale utente

Brother

Brother Business Smart MFC-J4510dw Manuale utente

Epson

Epson Stylus CX8400 Series Manuale utente

Oce

Oce VarioLink 5022 Manuale utente

Copystar

Copystar CS 4551ci Manuale utente