Konica Minolta FK-514 Manuale utente

E-1

FK-514 Fax Kit

INSTALLATION MANUAL

A883-9552-00

Applied Machines: C658/C558/C458/C368/C308/C258

COLOR MFP: 65 ppm/55 ppm/45 ppm/36 ppm/30 ppm/25 ppm

Product Code: A79J/A79K/A79M/A7PU/A7PY/A7R0

1. Accessory parts *1 This part is used only when installing this option

to models C658/C558/C458.

*2 When installing a Line 1, use the two gaskets.

When installing a Line 2, use three of the four

gaskets supplied with the Fax Kits for the Line 1

and Line 2.

*3 Depending on the applicable marketing area, the

modular cable may have a ferrite core.

*4 Not included depending on the applicable mar-

keting area.

Note:

• This manual provides the illustrations of the

accessory parts and machine that may be

slightly different in shape from yours. In that

case, instead of the illustrations, use the

appearance of your machine to follow the

installation procedure. This does not cause any

significant change or problem with the proce-

dure.

• If none of the later steps instruct you to use the

parts including screw and cover that you

removed following the instructions described in

this manual, discard them.

2. Installation procedures

No. Name Shape Q’ty

1. Fax kit

2. Gasket *1*2

3. Modular cable

4. Ferrite core *4

5. Modular cover

6. Label (Super

G3 label) *4 1

7. Label *4

1 set

8. Installation

manual

1 set

Follow the installation procedures starting on page

E-2.

Follow the installation procedures starting on page

E-9.

Keep this bag away from babies and

children. Do not use in cribs, beds,

carriages, or playpens.

The thin film may cling to nose and

mouth and prevent breathing. This bag is

not a toy.

E-2

(1) Turn OFF the power switch and unplug the

power cord from the power outlet.

(2) Open the rear right cover.

(3) Remove the connector cover at the lower portion

inside the cover. (One screw)

(4) Remove the shield cover (FAX1) from the lower

under side, inside the door. (Two screws)

Note:

When installing a second fax kit, remove the shield

cover (FAX2) from the upper side.

(5) Make sure that the fax kit switch keys are placed

in positions as shown in “Line 1” below.

Note:

When installing a second fax kit, flip the fax kit

switch keys into positions as shown in “Line 2”

below.

(6) Attach the two supplied gaskets on the under-

side of the fax kit (Line1) as shown in the illustra-

tion.

E-3

(7) Attach one supplied gasket on the top of the fax

kit (Line 1) as shown in the illustration.

(8) Insert the fax kit into the under socket (FAX1)

and secure it with the two screws removed in

step (4).

Note:

• Be careful not to pinch the harness between

plates.

• When installing a second fax kit, insert the FAX

kit into the upper socket (FAX2).

Note:

When installing a second fax kit, insert the sup-

plied modular cover into the modular jack (TEL) for

“Line-2.”

(9) Connect each of the two connectors of the fax kit

to the corresponding port of FAX1.

Note:

When installing a second fax kit, connect the two

connectors to respective ports of FAX2.

E-4

(10) Route the fax kit harness and the USB cable as

shown in the illustration below.

(11) Reinstall the connector cover that has been

removed in step (3).(One screw)

Note:

• Fit the connector cover protrusion in the portion

of the machine shown in the illustration below.

• Be careful not to pinch the harness.

• Wind the USB cable of the Line 2 around the

two protrusions as shown in the illustration.

a. When the ferrite core is not installed to the

supplied modular cable

(1) Insert the supplied modular cable in the modular

jack (LINE).

Note:

If the user is connected with a key telephone sys-

tem or a private branch exchange (PBX), do not

connect the modular cable to where other than an

analog line.

E-5

(2) Insert the modular cable of the telephone line to

the modular jack (TEL) of the fax kit (Line 1).

(3) Insert the supplied modular cable in the modular

jack (LINE).

Note:

If the user is connected with a key telephone sys-

tem or a private branch exchange (PBX), do not

connect the modular cable to where other than an

analog line.

(4) Place the modular cable in the harness guide.

<When adding no paper feed options/desk or when

using the Desk DK-705>

(5) Pass the modular cable into the hole in the lower

portion of the rear right cover.

<When using the Paper Feed Cabinet PC-415/PC-

215/PC-115 or desk DK-510>

(5) Perform the following steps.

a) Remove the rear right cover from the paper

feed cabinet or the desk. (Two screws)

b) Remove the knockout from the rear right cover

using nippers.

c) Route the modular cable through the three wire

saddles.

E-6

d) Route the cable through the notch and attach

the rear right cover. (Two screws)

b. When the ferrite core is installed to the sup-

plied modular cable

(1) Connect the supplied modular cable in the mod-

ular jack (LINE) of the fax kit (Line 1).

Note:

If the user is connected with a key telephone sys-

tem or a private branch exchange (PBX), do not

connect the modular cable to where other than an

analog line.

(2) Following the steps given below, house the fer-

rite core of the modular cable in the machine.

a) Hook the cable.

b) Pass the cable wound around the ferrite core

through the protrusion.

(3) Perform the following steps.

a) Attach the supplied ferrite core to the position of

the modular cable of the telephone shown in

the illustration.

Note:

Install the ferrite core by winding the cable two

turns.

b) Connect the modular cable of the telephone

line to the modular jack (TEL) of the fax kit

(Line 1).

80 ± 5 mm

Fax kit connection side

E-7

c) House the ferrite core of the modular cable in

the machine.

Note:

• Pass the protrusion shown in the illustration

below through the cable wound around the fer-

rite core in step a).

• Position the ferrite core so that it is placed on

the base shown in the illustration below.

(4) Perform the following steps.

a) Connect the supplied modular cable in the

modular jack (LINE) of the fax kit (Line 2).

Note:

If the user is connected with a key telephone sys-

tem or a private branch exchange (PBX), do not

connect the modular cable to where other than an

analog line.

b) House the ferrite core of the modular cable in

the machine.

Note:

Pass the cable wound around the ferrite core

through the protrusion.

(5) Route the modular cable through the harness

guide.

<When adding no paper feed options/desk or when

using the Desk DK-705>

(6) Pass the modular cable into the hole in the lower

portion of the rear right cover.

Base

Protrusion

E-8

<When using the Paper Feed Cabinet PC-415/PC-

215/PC-115 or desk DK-510>

(6) Perform the following steps.

a) Remove the rear right cover from the paper

feed cabinet or desk. (Two screws)

b) Remove the knockout from the rear right cover

using nippers.

c) Route the modular cable through the three wire

saddles.

d) Route the cable through the notch and attach

the rear right cover. (Two screws)

(1) Affix the supplied label to the position shown

below.

(2) Affix the supplied label (Super G3 label) to the

position shown below.

(3) Go to “3. Configuration procedures” on page

E-15.

Label

Super G3 label

E-9

(1) Turn OFF the power switch and unplug the

power cord from the power outlet.

(2) Open the rear right cover.

(3) Remove the connector cover at the lower portion

inside the cover. (One screw)

(4) Remove the shield cover (FAX1) from the lower

under side, inside the door. (Two screws)

Note:

When installing a second fax kit, remove the shield

cover (FAX2) from the upper side.

(5) Make sure that the fax kit switch keys are placed

in positions as shown in “Line 1” below.

Note:

When installing a second fax kit, flip the fax kit

switch keys into positions as shown in “Line 2”

below.

(6) Insert the fax kit into the under socket (FAX1)

and secure it with the two screws removed in

step (4).

Note:

• Be careful not to pinch the harness between

plates.

• When installing a second fax kit, insert the FAX

kit into the upper socket (FAX2).

E-10

Note:

When installing a second fax kit, insert the sup-

plied modular cover into the modular jack (TEL) for

“Line-2.”

(7) Connect each of the two connectors of the fax kit

to the corresponding port of FAX1.

Note:

When installing a second fax kit, connect the two

connectors to respective ports of FAX2.

(8) Route the fax kit harness and the USB cable as

shown in the illustration below.

Indice

Altri manuali Konica Minolta Fax

Konica Minolta

Konica Minolta Minoltafax 2800 Manuale utente

Konica Minolta

Konica Minolta Bizhub C3350 Manuale utente

Konica Minolta

Konica Minolta 1510 Manuale utente

Konica Minolta

Konica Minolta Minoltafax 1600e Manuale utente

Konica Minolta

Konica Minolta FK-502 Manuale utente

Konica Minolta

Konica Minolta bizhub 225i Manuale utente

Konica Minolta

Konica Minolta 9825 Manuale utente

Konica Minolta

Konica Minolta bizhub C25 Manuale utente

Konica Minolta

Konica Minolta FAX 2900 Manuale utente

Konica Minolta

Konica Minolta MC1690MF Manuale utente

Konica Minolta

Konica Minolta 9880 Manuale utente

Konica Minolta

Konica Minolta Fax Kit (FX-3) Manuale utente

Konica Minolta

Konica Minolta T.37 Manuale utente

Konica Minolta

Konica Minolta FAX 9840 Manuale utente

Konica Minolta

Konica Minolta bizhub C20X Manuale utente

Konica Minolta

Konica Minolta FK-513 Manuale utente

Konica Minolta

Konica Minolta FK-505 Manuale utente

Konica Minolta

Konica Minolta bizhub C220 Series Manuale utente

Konica Minolta

Konica Minolta Minoltafax 1600 Manuale utente

Konica Minolta

Konica Minolta Minoltafax 1100 Manuale utente

Konica Minolta

Konica Minolta 5600 Manuale utente

Konica Minolta

Konica Minolta Minoltafax 1800 Manuale utente

Konica Minolta

Konica Minolta FX-3 Manuale utente

Konica Minolta

Konica Minolta Minoltafax 1400 Manuale utente

Manuali Fax popolari di altre marche

Samsung

Samsung SF-515 Manuale utente

Radio Shack

Radio Shack TFX-1031 Manuale utente

imagistics

imagistics 2030 Manuale

Panasonic

Panasonic KX-FL501C Manuale utente

Panasonic

Panasonic KX-FP200L Manuale utente

Furuno

Furuno FAX-30 Manuale utente

Savin

Savin 3740 Manuale

Sharp

Sharp FO-51 Manuale utente

Muratec

Muratec MFX-C3035 Manuale utente

Panasonic

Panasonic KX-PD505DL Manuale utente

Panasonic

Panasonic KX-FC265CX-S Manuale utente

Canon

Canon FAX-L400 Manuale utente

Ricoh

Ricoh 1000L Guida rapida

Sharp

Sharp FO-3150 Manuale utente

Kyocera

Kyocera KM-F1060 Manuale utente

Sharp

Sharp FO-2970M Manuale utente

Panasonic

Panasonic KX-F850 Manuale utente

Panasonic

Panasonic KX-FLM652CX Manuale utente