Kontron KISS Stor Slim Manuale utente

KISS Stor Slim

KISS Stor Slim Quick Installation Guide

Package Contents

zKISS Stor Slim RAID box.

zTwo disk drive carriers.

zKISS Stor Slim Quick Installation Guide.

zKISS Stor Slim user kit CD. (User’s Manual and GUI software)

zRS-232 cable with bracket and serial cable for COM port.

zDisk drive mounting screws.

zTwo keys for drive carriers. (identical)

Know your KISS Stor Slim

zKISS Stor Slim Front view:

Access LED indicator for indicating that hard disk is been accessing.

Status LED indicator for indicating that disk current status.

KISS Stor Slim

zKISS Stor Slim Rear view:

1. SATA DC power input connector

2. SATA host connector

3. RS232 connector (J10)

4. Reserved for feature/function expand (J9 default is closed)

5. Standard AT/ATX DC power input connector

zStatus of all LED indicators KISS Stor Slim

The table lists all matches of 2 LED indicators for indicating status of RAID

box.

Status indicator

Red/Green

Access indicator

Yellow

RAID status

Green Off Disk is installed, no access

Green On/flash Disk is being accessing

Red Off No disk installed or disk failure

Flash (Red/Green) On/flash Disk is rebuilding

KISS Stor Slim

Setup your KISS Stor Slim

1. Load hard drives to each drive carriers, and secure the hard drives by

screwing.

2. Power down your host computer and mount the RAID box in the host.

3. Connect the SATA or IDE cable and DC power cable to RAID box from host

computer.

4. Connect the RS-232 cable to RAID box RS-232 port and COM port of the host.

(Option for upgrading firmware or GUI remote monitor)

Caution

urn off and disconnect all electrical power from the system

before be

innin

installation.

Note

There is a triangular symbol “▲” on both PCB

connector(J10) and RS-232 cable connector, please

make sure that you connect in the right direction (both

triangle symbols match each other).

KISS Stor Slim

Start to use your KISS Stor SATA

Application 1: Two new disk drives.

1. Install and lock all drive carriers and they are ready for use.

2. Power on the host computer.

3. After system boot up, the RAID box will be recognized as Accusys KISS

Stor Slim by host system. And system treats it as a single disk.

4 Partition and format the RAID box before it can be used.

Application 2: Installing one disk drive with data and one new disk

drive.

1. The new disk drives must have the same capacity or larger capacity than

the drive with data.

2. Lock the disk with data at the top drive carrier and leave the new disks

unlocked at the bottom drive carriers. This identifies the disk with data as

the source drive. (The host computer must in power off state.)

3. Power on the host computer.

4. Lock the bottom drive.

5. The RAID box will immediately begin mirroring the data from the source

drive to the new disk drive in bottom drive carrier. Any old data on the

new disk drive will be lost, and is overwritten with the mirror image of the

source drive.

Contact Kontron Embedded Computers GmbH

•Support: [email protected]

Note

If you have installed non-identical hard disk drives,

your computer will recognize RAID box

as a single hard

disk with a capacity equal to the smaller hard disk drive

installed in the RAID box.

Indice

Altri manuali Kontron Hardware per computer

Kontron

Kontron CP6003-RA/RC Manuale utente

Kontron

Kontron COM Express Extension Manuale utente

Kontron

Kontron AT8902M Manuale utente

Kontron

Kontron CP6500-V Manuale utente

Kontron

Kontron aFLAT Series Manuale utente

Kontron

Kontron AM4024 Manuale utente

Kontron

Kontron X-Board UPA 63036 Manuale utente

Kontron

Kontron MOPS/386A Manuale utente

Kontron

Kontron PCI-759 Manuale utente

Kontron

Kontron SMARC-sAMX6i Manuale utente

Kontron

Kontron nanoETXexpress-SP Manuale utente

Kontron

Kontron SMARC-sAMX8X Manuale utente

Kontron

Kontron SDML-WLU0 Series Manuale utente

Kontron

Kontron COM-HPC Manuale utente

Kontron

Kontron ePanel-mgx Manuale utente

Kontron

Kontron KTGM45/mITX Manuale utente

Kontron

Kontron MITX-CFL0 Series Manuale utente

Kontron

Kontron BL Pi-Tron CM3+ Manuale utente

Kontron

Kontron PCI-946-1 Manuale del prodotto

Kontron

Kontron COMe-bID7 Manuale utente

Kontron

Kontron COM Express Eval 10 Manuale utente

Kontron

Kontron AT8901 Manuale utente

Kontron

Kontron CP3003-SA Manuale utente

Kontron

Kontron AdvancedMC AM4211 Manuale utente

Manuali Hardware per computer popolari di altre marche

EMC2

EMC2 VNX Series Manuale del proprietario

Panasonic

Panasonic DV0PM20105 Manuale utente

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuale utente

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuale utente

Raidon

Raidon iT2300 Manuale utente

National Instruments

National Instruments PXI-8186 Manuale utente

Hauppauge

Hauppauge WinTV-HVR-2250 Manuale utente

Manhattan

Manhattan 702843 Manuale utente

Aphex

Aphex 230 Manuale utente

AMD

AMD Phenom II Manuale operativo

Intel

Intel NUC 12 Pro Manuale utente

dbx

dbx Zone Pro 1260 Manuale utente

Galaxy

Galaxy GHDX2-2430S-24F4D Manuale utente

Intel

Intel AXXRMFBU4 Manuale utente

ST X-NUCLEO-SAFEA1B Istruzioni operative

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuale utente

Advantech

Advantech ASMB-935 Series Manuale utente

Jupiter

Jupiter RAM PACK Manuale utente