Koolbreeze Koolmist 300 Manuale utente
Page 1 of 12
Koolbreeze
Koolmist 300 (KME300)
Evaporative Cooling Fan
User Guide
Please retain these instructions for future reference
Page 2 of 12
Table of Contents
Product Safety ........................................................................ 4
Getting to know the Koolmist 300......................................... 5
Koolmist 300 Operator Panel................................................. 6
Operating the Koolmist 300................................................... 7
Maintenance and Cleaning .................................................. 10
Troubleshooting ................................................................... 11
Technical Information .......................................................... 11
Thank you for purchasing this Koolmist 300 unit. Please read the following
instructions carefully to ensure proper and safe use of the unit. Please retain
these instructions for future reference. Updated versions of this user guide are
available from www.koolbreeze.co.uk.
Page 3 of 12
Product Features
•Cooling Function
Utilises evaporation of water to cool air being drawn through the unit by
the quiet but powerful fan.
•Humidifier Function
Reduces dryness of the air
•Ionizer Function
Releases negative ions to freshen the air
•Detachable and removable components for easy cleaning and
maintenance
•Remote control
•Automatic low water level pump shut off
Page 4 of 12
Product Safety
Additional Safety Considerations
This appliance can be used by children aged from 8 years and above and
persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards
involved.
The cleaning and user maintenance operations described later in this user
guide should not be undertaken by children.
Page 5 of 12
Getting to know the Koolmist 300
01
Front Cover
12
Rear Air Filter and Cover
02
Transverse Swing Louvres
13
Bottom Cover for Cooling Pad
03
Vertical Swing Louvres
14
Power Cord and Plug
04
Control Panel
15
Water Tank Buckle/Catch
05
Top Cover
16
Water Pump
06
Fan Rotor
17
Motor
07
Water Chamber Cover
18
Water Pump Bracket
08
Side Cover
19
Water Level Indicator
09
Back Cover
20
Water Tank
10
Paper Cooling Pad
21
Wheel/Castor
11
Top Cover for Cooling Pad
Page 6 of 12
Koolmist 300 Operator Panel
01
Cool
Press once to enable/disable evaporative cooling function. The
“COOL”indicator (12) will illuminate when function is enabled.
Before using this function check water level in water tank.
02
Ionizer
Press once to enable/disable ionizer function. Ionizer indicator (13)
will illuminate when function is enabled.
03
Wind
Press button to switch between different wind/ventilation modes
(“NORMAL”, “NATURE (WIND)”, “SLEEP”). The currently selected
mode is shown by the indicator lights (09, 10 and 11). When
selected “NATURE” mode simulates gusts of wind and “SLEEP”
mode reduces intensity over time
04
Timer
The unit has a built-in timer function. When enabled periods of
0.5h, 1h,2h,4h can be selected up to a maximum of 7.5h using the
selector buttons (19).
05
Speed
Press button to select “LOW”, “MEDIUM” or “HIGH” fan speeds.
The current selected speed will be shown by the indicator lights
(16,17 and 18)
06/07
Swing
Press “HORIZONTAL SWING” or “VERTICAL SWING” to
enable/disable horizontal and vertical movement of louvres
08
On/Off
Press once to turn unit on or off. The low fan speed and standard
normal wind indicator will illuminate
Page 7 of 12
Operating the Koolmist 300
1. Remove the Koolmist 300 from the packaging taking care to retain any
separately packed components.
2. Check and remove any temporary packing or security tape used to protect
the unit during transit.
3. Insert CR2032 button cell battery (not supplied) into the remote control.
4. Confirm the paper cooling pad and air filter are correctly assembled in the
unit.
5. Check the power cord for any damage. If the power cord is damaged do not
use the unit and contact an authorised service agent for guidance.
6. Fill the Koolmist 300 with water or ice cubes through the top flap as shown
below taking care not to overfill the unit. Alternatively, the water tank can
also be filled by removing the top of the unit as shown in the maintenance
section.
Page 8 of 12
7. Depending on the electric plug requirements of the country the unit is
being used in, either connect the unit to an electricity supply of the correct
voltage and type or where necessary remove the supplied converter plug to
expose the Schuko CEEE 7/7 EU plug plug.
Page 9 of 12
8. Operate the unit using the buttons on the remote control or the operator
panel.
Page 10 of 12
Maintenance and Cleaning
1. Before undertaking any cleaning or maintenance activities ensure the
power cord is removed from the electricity supply.
2. The outside of the unit can be cleaned with a damp cloth. Do not use
abrasive or solvent based cleaning agents to clean the unit.
3. The internal water tank can be cleaned by separating the fan unit from the
water tank as shown below.
The paper cooling pad can be removed for cleaning as shown below
Questo manuale è adatto per i seguenti modelli
1
Indice
Manuali Hardware per computer popolari di altre marche
EMC2
EMC2 VNX Series Manuale del proprietario
Panasonic
Panasonic DV0PM20105 Manuale utente
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manuale utente
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manuale utente
Raidon
Raidon iT2300 Manuale utente
National Instruments
National Instruments PXI-8186 Manuale utente
