Korg Karma Manuale utente

Routing Insert Effects and Individual Outputs – Karma

Karma’s HI synthesis allows for very simple routing of sounds to any of the 4 outputs while in the

Sequencer mode or Combination mode. In addition, you can choose whether sounds are routed dry

or with insert effects. This tutorial will discuss both processes. Please take the time to read both, as

the first section will help pave the way for the second.

Tutorial 1 - Assigning Non-Effected (Dry) signals to individual outs

Let’s route track 1 to the third output (INDIV 1) in the Sequencer mode:

1. Press the SEQ button to enter Sequencer Mode.

2. Press the MENU button.

3. Press the F7 button once to highlight “BUS” on screen.

4. Press the F8 button directly below “Open” on the screen. This will take you to the Insert FX section.

On this screen, you’ll be able to see the routing for the first eight tracks of the sequence. (Tracks 9-16

are under a different tab –F2. Right now, let’s just stay on tracks 1-8). Notice that all tracks are

defaulted to “L/R”. This means that all of the tracks are heading for the stereo L Mono & R outputs.

Here is where you can change that output destination.

5. Notice that the output routing for track 1 is already selected (Darkened). Using the value slider, wheel

or buttons, change “L/R” to “1”. Track 1 will now come out of “INDIV 1”.

6. Repeat for track 2-16 as needed.

Tutorial 2 - Assigning tracks to individual outs with Insert Effects

Insert effects are effects that can be assigned to specified tracks. Much like our previous example,

insert effects can be set to output whatever signal is routed to them to individual outs. Let’s assign an

effect to Track 1 of a Sequence, then take the effected sound and route it to Individual output 1:

First, let’s get an insert effect assigned in the Sequencer mode:

1. Press the SEQ button to enter Sequencer Mode.

2. Press the MENU button.

3. Press the F7 button twice to highlight “IFX” on screen.

4. Press the F8 button, directly below “Open” on the screen. This will take you to the Insert FX section.

5. Press the F1 button, directly below “Setup” on the screen. This will take you to the IFX setup screen,

where you can select desired effects.

Each line of this screen represents a different insert effect. There are a total of five inserts that can be set

up:

6. Using the value slider, buttons or dial, select an effect of your choice for "IFX1".

7. Press the left < cursor button once to highlight the "Off" field

8. Using the value wheel change it to "On".

Now, we can set tracks to use that effect. Again, let's use track 1 as our example:

9. Press the F7 “Route” tab. Notice that track 1 is already selected (Darkened) at the bottom of the screen.

Using the value slider, wheel or buttons, make a “connection” to insert effect 1 – This will be indicated

by a line drawn from “1” to “IFX1”.

Now, we need to route the Insert Effect to the desired output.

10. Press the Setup (F1) tab. You will again see the list of Insert Effects being used.

11. IFX1 is still selected since we were working with it before. From here, press the right > cursor button

until you have selected “L/R” on the screen. This is the “BUS Select” as indicated at the top right hand

side of the screen.

12. Much like in our previous example, using the value wheel or the Inc or Dec buttons, select ”1” which

sends the effect, and the programs it is being used on, to output “INDIV 1”.

Repeat steps 2 and 3 for each insert effect you wish to route to an output.

NOTE: Most of the Insert effects are stereo, this in mind, you can keep the effects stereo by selecting a

dual output routing. In other words, in addition to choices like “1” and “2” there is also a paired

choice; “1/2”, which allows the sound to come out of two outputs. This is a stereo pair, and will keep

stereo effects intact.

Altri manuali per Karma

Indice

Altri manuali Korg Apparecchiature di registrazione

Manuali Apparecchiature di registrazione popolari di altre marche

KV2 Audio

KV2 Audio 500 Series Manuale utente

Robotics Technologies

Robotics Technologies microBus-Cam II Manuale utente

Seca

Seca 460 Manuale utente

Cognex

Cognex MVS-8000 Series Manuale utente

Mect

Mect MPNC006 Series Manuale utente

Bad Caf

Bad Caf THE LEASH Manuale utente

Strymon

Strymon NIGHTSKY Manuale utente

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Manuale utente

Tews Technologies

Tews Technologies TPMC465 Manuale utente

Honeywell

Honeywell Excel 50 Manuale utente

SeaLevel

SeaLevel COMM+8.LPCI Manuale utente

Arturia

Arturia AUDIOFUSE STUDIO Manuale utente

Rukra

Rukra RK-1240 Manuale utente

Samson

Samson SCOM Manuale utente

Dynacord

Dynacord DPS260 Manuale utente

Nice

Nice Core Manuale utente

Pyle Pro

Pyle Pro PSS8 Manuale utente

RF-System

RF-System TinyGate Manuale per l'uso e la cura