KPN MIM802 Manuale di istruzioni
MIM802 Quick Start Manual, V1.0 Page 1 of 14
KPN Mobiel Internet Modem 802 (MIM802)
Quick Start Manual
MIM802 Quick Start Manual, V1.0 Page 2 of 14
Table of Contents
What Is in Your Packet..............................................................................3
Getting to Know Your KPN MIM802..........................................................3
Preparation................................................................................................5
Installation/Uninstallation Guide................................................................ 6
Warnings and Precautions........................................................................ 8
Acronyms and Abbreviations...................................................................14
Thank you for choosing KPN Mobiel Internet Modem 802
USB Modem (hereinafter referred to as the KPN MIM802).
With the KPN MIM802, you can access the Internet
through wireless network at a high speed.
Note: This manual briefs the profile of the KPN MIM802, and the preparation,
installation and uninstallation process. For the operation of the management
program, see the User Manual.
MIM802 Quick Start Manual, V1.0 Page 3 of 14
What Is in Your Packet
The package of your KPN MIM802 contains the following items:
One KPN MIM802
One Quick Start
Two USB Cables
One USB Adapter(optional)
Getting to Know Your KPN MIM802
This is the sketch for the KPN MIM802. The actual product may differ.
1
2
3
SIM/USIM Card Slot
Insert the subscriber identity module/UMTS subscriber identity module (SIM/USIM)
card into the slot.
Indicator
It indicates the status of the KPN MIM802.
When the KPN MIM802 is powered on, the indicator is blinking in green. (The
indicator is on for 100 ms and off for 100 ms, and then on for 100 ms and off
for 2700 ms.)
MIM802 Quick Start Manual, V1.0 Page 4 of 14
When the KPN MIM802 has registered to a GPRS (GSM/GPRS/EDGE)
network, the indicator is blinking in green. (The indicator is on for 100 ms and
off for 2900 ms.)
When the KPN MIM802 has registered to a UMTS (WCDMA/HSPA) network,
the indicator is blinking in blue. (The indicator is on for 100 ms and off for 2900
ms.)
When the KPN MIM802 has been connected to a GPRS network, the indicator
is on in green.
When the KPN MIM802 has been connected to a WCDMA network, the
indicator is on in blue.
When the KPN MIM802 has been connected to a HSPA network, the indicator
is on in cyan.
When the KPN MIM802 is removed, the indicator is off.
Mini-USB Interface
It connects the KPN MIM802 with a computer through a USB data cable.
MIM802 Quick Start Manual, V1.0 Page 5 of 14
Preparation
Requirements for the Computer
To use the KPN MIM802, the following configurations for the Computer are
required.
USB interface.
CPU: 133 MHz Pentium or above. 500 MHz Pentium or above is
recommended.
Memory: 128 MB RAM or above.
Free space on the hard disk: 50 MB or above.
Windows XP/ 2000/ Vista is installed.
Resolution for the Computer screen: 800 × 600 or above. 1024 × 768 is
recommended.
Getting Your KPN MIM802 Ready
Insert the subscriber identity module/UMTS subscriber identity module (SIM/USIM)
card into the slot of the KPN MIM802 with the golden contacts side facing upwards
and the cut corner directing inwards. Follow the direction on the back of the KPN
MIM802.
MIM802 Quick Start Manual, V1.0 Page 6 of 14
Installation/Uninstallation Guide
Under different operating systems (OSs), the installation and uninstallation
procedures may differ. If there is any difference, follow the actual installation
prompts.
Connecting the KPN MIM802 with a Computer
Note: First, power on a computer. Then connect the KPN MIM802 with the
computer. Otherwise, the normal installation of the KPN MIM802 can be
affected.
You can connect the KPN MIM802 to a computer with the USB data cable or the
USB adapter. Two data cables are provided. One is short and single-ended. The
other is long and double-ended. Generally, the single-ended data cable is used. If
the power supply to the KPN MIM802 is not enough, use the double-ended data
cable instead.
Note: If the power supply to the KPN MIM802 is not enough, the KPN MIM802
cannot work normally.
The following figure shows the double-ended data cable.
1
2
3
1. Auxiliary USB data cable
2. Main USB data cable
3. Mini-USB Connector
Plug the mini-universal series bus (USB) connector into the KPN MIM802.
MIM802 Quick Start Manual, V1.0 Page 7 of 14
Plug the connectors of the main USB data cable and the auxiliary USB data
cable into the USB interfaces of the computer.
The OS auto detects and recognizes new hardware and starts the installation
wizard.
Follow the prompts of the installation wizard.
After the program is installed, a shortcut icon for The KPN MIM802
management program is displayed on the desktop.
Starting the Management Program
Double-click the shortcut icon on the desktop to start the management
program of the KPN MIM802.
In the displayed interface, enter the personal identity number (PIN) code if you
have enabled the PIN lock.
Removing the KPN MIM802
Double-click in the status area. The Unplug or Eject Hardware
interface is displayed.
Select and stop the hardware related to the KPN MIM802.
When the OS displays "It is safe to remove the device", remove the KPN
MIM802.
Note: Before removing the KPN MIM802, exit the Management Program.
Uninstalling the Management Program
Click Start Menu.
Click Control Panel.
Click Add/Remove Program to uninstall the management program of The
KPN MIM802.
Note: Before uninstalling the Management Program, remove the KPN
MIM802.
MIM802 Quick Start Manual, V1.0 Page 8 of 14
Warnings and Precautions
General Recommendations for Use
Always handle your wireless device with care and keep it in a clean and dust-free
place. Do not expose your wireless device to open flames or lit tobacco products.
Always keep your wireless device dry.
Do not drop, throw or try to bend your wireless device.
Do not paint or scratch your wireless device.
Do not attempt to disassemble your wireless device. Doing so will void
warranty. Only authorized personnel are allowed to do so.
Use approved accessories only. Do not connect your wireless device to any
incompatible products.
Laws and Regulations
Do not operate your wireless device where it may be unsafe to do so or where
you are required not to do so.
To deactivate your wireless device, stop all applications using the wireless
device first and then remove the wireless device from your PC.
Obey all local laws, regulations, rules, orders, signs and notices while using
the wireless device. Signs about the use of mobile phones should also be
obeyed as referring to other wireless equipment including wireless devices
provided by KPN.
Electronic Device
Deactivate your wireless device near high-precision electronic devices. The
wireless device may affect the performance of these devices.
Such devices include hearing aids, pacemakers, fire alarm systems,
automatic gates, and other automatic-control devices. If you are using an
electronic medical device, consult the device manufacturer and confirm
whether the radio wave affects the operation of this electronic device.
Pacemaker manufacturers recommend that a minimum separation of 15 cm
be maintained between a wireless device and a pacemaker to avoid potential
interference with the pacemaker. Deactivate your wireless device, if it may
have disturbance to the pacemaker
MIM802 Quick Start Manual, V1.0 Page 9 of 14
Deactivate in Explosive Areas
Deactivate your wireless device where the air is potentially explosive. It is rare, but
your PC could generate sparks.
Deactivate in Blasting Areas
Deactivate your wireless device where blasting is in progress. Remote-controlled
radio frequency (RF) devices are often used at construction sites to set off blasting.
Deactivate in Aircrafts
Deactivate your wireless device before boarding or in any aircraft. Wireless devices
can cause interference in aircrafts.
Deactivate at Hospitals
Obey regulations or rules at hospitals. Deactivate your wireless device near
medical equipment. Wireless devices can cause interference to cardiac
pacemakers, implanted defibrillators or other medical equipment.
Deactivate near Hearing Devices
Deactivate your wireless device near hearing devices. People with hearing aids
may experience interfering noise near wireless devices.
Recommendations for Children
Do not allow children to play with your wireless device. They could hurt themselves
or others, or could accidentally damage the wireless device. Your wireless device
contains small parts with sharp edges that may cause an injury or a choking
hazard.
Deactivate While Driving
Do not use the wireless device while driving.
Immunity to Interference
Your wireless device is immune to interferences caused by audible signals.
MIM802 Quick Start Manual, V1.0 Page 10 of 14
Cleaning and Maintenance
Before you clean or maintain the wireless device, stop all applications using
the wireless device and remove your wireless device from your PC.
Clean your wireless device with a piece of soft antistatic cloth.
If the wireless device or any of its accessories does not work, turn to an
authorized service center for help.
Environmental Protection
Observe the local regulations regarding the disposal of your packaging materials,
old wireless device and its accessories. Please promote their recycling.
SIM/USIM Cards
While inserting or removing the SIM card, protect yourself against electrostatic
discharge (ESD). Do not touch the connector of the SIM card. As a precaution,
always make sure that the wireless device is already in your hand before you insert
or remove the SIM card.
Restart on ESDs
Software will attempt to re-initialize a connection once a substantial electrostatic
discharge causes the device to reset. If the software is not operational after an ESD,
restart the software application.
Agency/Regulatory Information
The wireless device is approved for use in many regions of the world. In these
regions, the device meets all radio frequency exposure requirements. The following
approvals and notices apply in specific regions as noted.
CE Approval (European Union)
The wireless device is approved to be used in the member states of the EU. KPN
declares that the wireless device is in compliance with the essential requirements
and other relevant provisions of the Radio and Telecommunications Terminal
Equipment Directive 1999/5/EC (R&TTE Directive).
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali KPN Modem
KPN
KPN USB-Modem 2 Manuale di istruzioni
KPN
KPN Experia Box v10 Guida all'installazione
KPN
KPN E160 Manuale di istruzioni
KPN
KPN Experia Box v10 Guida all'installazione
KPN
KPN usb-modem Manuale utente
KPN
KPN usb-modem Manuale di istruzioni
KPN
KPN Experia Box v10A Guida all'installazione
KPN
KPN usb-modem Manuale utente
KPN
KPN Experia Box v10A Guida all'installazione
