Kramer K-CamHD Manuale utente
K-CamHD Quick Start
P/N:
2900- 301529QS
Rev:
2
Scan for full manual
K-CamHD Quick Start Guide
This guide helps you install and use your K-CamHD for the first time.
Go to www.kramerav.com/downloads/K-CamHD to download the latest user manual and check if firmware
upgrades are available.
Step 1: Check what’s in the box
K-CamHD PTZ Camera
Lens cover
1 USB 3.0 cable
Remote control transmitter with batteries
Wall bracket
1 Quick start guide
Power adapter and cord
Screws set
Step 2: Get to know your K-CamHD
#
Feature
Function
1
Camera
High quality Camera.
2
Tilting Mechanism
Can be set to any of 255 preset positions.
3
STANDBY LED
Lights green when the camera is in
standby mode.
4
POWER LED
Lights blue when the power is on.
5
USB 3 Type B Port
Connect to a PC.
6
LINE IN
Connect to a microphone.
7
RS-232 8-
pin DIN
Connectors
IN
Connect to a device with an RS-232 port
(for example, a system controller).
8
OUT
Connect to a device with an RS-232 port
(for example, a camera).
9
12V DC Power
Connector
Press and hold to toggle the
locking/release of the front panel buttons.
When storing or recalling presets, press to
store or recall the preset.
Step 3: Mount K-CamHD
You can mount K-CamHD on the wall, the ceiling or place it on a tabletop. The built-in gravity sensor automatically corrects the image orientation.
•Ensure that the environment (e.g., maximum ambient temperature, humidity & air flow) is compatible for the device.
•Avoid exposing the product to direct sunlight or any other heat source.
•Keep away from children –product includes small accessories and components.
•Avoid uneven mechanical loading.
•Do not insert any sharp objects into the product.
•Avoid dropping or hitting the product to avoid damaging the product.
•For maintenance, call tech support.
To attach K-CamHD onto a wall:
1. Find the correct location on the wall.
2. In the desired location, mark the hole locations, then
drill 4 holes 82mm and 60mm apart (using a 6mm
drill-bit) to fit the 4 holes of the wall-mounting bracket.
3. Insert the four expansion-plugs into the holes.
4. Attach the wall bracket to the wall, using the four wall-
bracket screws.
5. Attach the device to the wall bracket by fitting the
mortise (on the bracket) into the tenon (on the
camera).
6. Fix the camera by screwing (A) Nickel screw to the
center and (B) then tighten with 3 black screws.
Note that you can also attach the device upside
down, from under the bracket.
Step 4: Connect inputs and outputs
Always switch OFF the power on each device before connecting it to your K-CamHD.
Control K-CamHD via the IR Remote Controller.
#
Key
Function
Shortcut Keys
*+＃+1: OSD default (English)
*+＃+3: OSD default (Chinese)
*+＃+6: Quickly recover the default
*+＃+8: View the camera version
*+＃+9: Quickly set up inversion
*+＃+MANUAL: Restore
default IP address
1
Power
Press once to enter standby mode. Press again to enter normal
operation mode.
2
Number (0 to 9)
Configure or edit a preset
3
*
Use together with other keys for various functions.
4
PRESET
Press PRESET + a numerical key (0 to 9) to save the current
configuration to that preset number.
5
HOME
Press to return K-CamHD to its default position.
When in the OSD, press to enter a submenu or confirm menu.
6
Return
Return to previous item on the menu.
7
ZOOM
SLOW
Press for slow zoom in (+) or out (-).
FAST
Press for quick zoom in (+) or out (-).
8
L/R
Set
STD (1)
Press L/R +STD (1) keys to set Pan-Tilt to same direction as L/R
setting.
REV (2)
Press L/R +REV (2) keys to set Pan-Tilt to the direction opposite to
the L/R setting.
9
FOCUS
AUT
O
Press to automatically set the focus to the center of the
image.
MAN
UAL
Press to enter manual focus mode. Then press FAR or
NEAR.
FAR
When in MANUAL mode, press to focus on a far object
NEA
R
When in MANUAL mode, press to focus on a near object.
10
CAMERA
SELECT
Select the camera to configure and control (1 to 4).
11
#
Use together with other keys for various functions.
12
IR RC
Press * + # + (F1 to F4) to assign a camera address to the remote.
For example, point the remote to a camera, press *+#+F1. The
remote assigns CAMERA SELECT 1 key to this camera. To use the
remote to control camera 1 press the CAMERA SELECT 1 key.
Press F4 to freeze the image.
13
RESET
Press RESET+ a key number (0 to 9) to delete a preset
configuration. Press *+#+RESET to delete all preset configurations.
14
PTZ Control
Control camera panning and tilting using arrow keys (left, right, up,
and down).
15
MENU
Enter/exit OSD menu.
16
BACKLIGHT
Press to turn backlight compensation on or off.
Available when exposure mode is set to Auto (via the OSD menu).
17
P/T RST
Press to self-check preset Pan/Tilt on camera.
Altri manuali per K-CamHD
2
Altri manuali Kramer Macchina fotografica digitale
