Kramer VP-2K Manuale utente
KRAMER ELECTRONICS LTD.
USER MANUAL
MODEL:
VP-2K
1:2UXGA/Audio Distributor
P/N: 2900-000490 Rev 3
VP-2K – Contents i
Contents
1Introduction 1
2Getting Started 2
2.1Achieving the Best Performance 2
3Overview 3
3.1Defining the VP-2K 1:2 UXGA/Audio Distributor 3
4Installing in a Rack 5
5Connecting the VP-2K 6
6Technical Specifications 8
Figures
Figure 1: VP-2K 1:2 UXGA/Audio Distributor 4
Figure 2: Connecting the VP-2K 1:2 UXGA/Audio Distributor 7
VP-2K - Introduction 1
1 Introduction
Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been
providing a world of unique, creative, and affordable solutions to the vast range of
problems that confront the video, audio, presentation, and broadcasting
professional on a daily basis. In recent years, we have redesigned and upgraded
most of our line, making the best even better!
Our 1,000-plus different models now appear in 11 groups that are clearly defined
by function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Matrix
Switchers; GROUP 3: Control Systems; GROUP 4: Format/Standards Converters;
GROUP 5: Range Extenders and Repeaters; GROUP 6: Specialty AV Products;
GROUP 7: Scan Converters and Scalers; GROUP 8: Cables and Connectors;
GROUP 9: Room Connectivity; GROUP 10: Accessories and Rack Adapters and
GROUP 11: Sierra Products.
Congratulations on purchasing your Kramer VP-2K 1:2UXGA/Audio Distributor,
which is ideal for the following typical applications:
•Presentation systems requiring a local monitor and projector operating
simultaneously
•Schools, churches, rental/staging
2 VP-2K - Getting Started
2 Getting Started
We recommend that you:
•Unpack the equipment carefully and save the original box and packaging
materials for possible future shipment
•Review the contents of this user manual
•Use Kramer high performance high resolution cables
Go to http://www.kramerelectronics.com to check for up-to-date
user manuals, application programs, and to check if firmware
upgrades are available (where appropriate).
2.1 Achieving the Best Performance
To achieve the best performance:
•Use only good quality connection cables to avoid interference, deterioration
in signal quality due to poor matching, and elevated noise levels (often
associated with low quality cables)
•Avoid interference from neighboring electrical appliances that may adversely
influence signal quality
•Position your Kramer VP-2K away from moisture, excessive sunlight and
dust
Caution: No operator serviceable parts inside the unit
Warning: Use only the Kramer Electronics input power wall
adapter that is provided with the unit
Warning: Disconnect the power and unplug the unit from the wall
before installing
i
!
VP-2K - Overview 3
3 Overview
The Kramer MultiTOOLS™ VP-2K is a high-performance distribution amplifier for
computer graphics signals, with resolutions exceeding UXGA, and unbalanced
stereo audio signals. It accepts one computer graphics input, and an unbalanced
stereo audio input, and outputs two computer graphics and two unbalanced stereo
audio signals.
In particular, the VP-2K features:
•High video bandwidth exceeding 380MHz, ensuring that it remains
transparent even at high-resolution graphics modes such as UXGA
(1600x1200)
•An AUDIO LEVEL trimmer to adjust the audio signal level, as well as UXGA
LEVEL and UXGA EQ. controls to adjust the signal level, compensating for
cable loss over long distances
•A switch for selecting AC or DC coupling
•HDTV compatibility
•KR - ISP™ technology, which provides a sharp, stable image when the sync
level is too low, by restoring the sync signal waveform
3.1 Defining the VP-2K 1:2 UXGA/Audio Distributor
This section defines the VP-2K.
4 VP-2K - Overview
Figure 1: VP-2K 1:2 UXGA/Audio Distributor
# Feature Function
1 ON LED Illuminates when the unit is powered ON
2 AUDIO LEVEL Control Adjust the output audio level, if required
Rotate all level and EQ controls with a small
screwdriver
3 UXGA LEVEL Control Adjust the UXGA output level, if required
4 UXGA EQ. Control Adjust the EQ. (equalization) compensation level,
if required
5 SYNC PROC. Button Push in to KR-ISP (to activate the sync
processing); or release to NORMAL
6 AUDIO IN (L) RCA Connector Connect to the left audio source channel
7 AUDIO IN (R) RCA Connector Connect to the right audio source channel
8 AUDIO OUT 1 (L) RCA Connector Connect to the left audio acceptor 1 channel
9 AUDIO OUT 1 (R) RCA Connector Connect to the right audio acceptor 1 channel
10 AUDIO OUT 2 (L) RCA Connector Connect to the left audio acceptor 2 channel
11 AUDIO OUT 2 (R) RCA Connector Connect to the right audio acceptor 2 channel
12 COUPLING Pushbutton Press in for AC coupling, out for DC coupling
13 UXGA IN 15-pin HD (F) Connector Connect to the UXGA source
14 UXGA OUT 1 15-pin HD (F) Connector Connect to the UXGA acceptor 1
15 UXGA OUT 2 15-pin HD (F) Connector Connect to the UXGA acceptor 2
16 5V DC +5V DC connector for powering the unit
VP-2K - Installing in a Rack 5
4 Installing in a Rack
This section provides instructions for rack mounting the unit.
6 VP-2K - Connecting the VP-2K
5 Connecting the VP-2K
Always switch off the power to each device before connecting it to your
VP-2K. After connecting your VP-2K, connect its power and then
switch on the power to each device.
To connect the VP-2K as illustrated in the example in Figure 2:
1. Connect a computer graphics source to the UXGA IN 15-pin HD (F)
connector and to the R and L AUDIO IN RCA connectors.
2. Connect the UXGA OUT 15-pin HD (F) connectors to up to two acceptors
(for example, a display and a projector) and connect the respective R and L
AUDIO OUT RCA connectors to audio acceptors (for example, two
amplifiers with speakers).
When both outputs are not required, connect only the required output and leave the
other output unconnected.
3. Connect the 5V DC power adapter to the power socket and connect the
adapter to the mains electricity (not illustrated in Figure 2).
4. If required:
Check that the SYNC PROC. button is pushed in, to activate the sync
processing
Adjust the AUDIO LEVEL, the UXGA LEVEL, and/or the UXGA EQ.
(equalization) compensation level
Set the coupling switch to AC or DC
Note: The VP-2K can also distribute HDTV signals in YPbPr format, using a
breakout cable with the following pinout:
For example, Kramer’s optional VGA to 3RCA breakout cable: C-GM/3RVF (not supplied).
15-pin HD Connector Pinout for HDTV
PIN# YPbPr SIGNAL
1 Pr
2 Y
3 Pb
i
VP-2K - Connecting the VP-2K 7
Figure 2: Connecting the VP-2K 1:2 UXGA/Audio Distributor
Altri manuali per VP-2K
1
Indice
Altri manuali Kramer Convertitore multimediale
Kramer
Kramer FC-10 Manuale utente
Kramer
Kramer VM-24HC Manuale utente
Kramer
Kramer VM-1110xl Manuale utente
Kramer
Kramer 810 Manuale utente
Kramer
Kramer VP-413 Manuale utente
Kramer
Kramer VP-424 Manuale utente
Kramer
Kramer VM-218DT Manuale utente
Kramer
Kramer FC-113 Manuale utente
Kramer
Kramer FC-31xl Manuale utente
Kramer
Kramer KDS-17DEC Manuale utente
Kramer
Kramer VP-419XL Manuale utente
Kramer
Kramer VP-413XL Manuale utente
Kramer
Kramer VM-2HxI Manuale utente
Kramer
Kramer VP-6AHD Manuale utente
Kramer
Kramer VM-2Hxl Manuale utente
Kramer
Kramer DigiTOOLS 6410N Manuale utente
Kramer
Kramer FC-49 Manuale utente
Kramer
Kramer FC-400 Manuale utente
Kramer
Kramer VM-400HDCPxl Manuale utente
Kramer
Kramer FC-332 Manuale utente
